CONSTRUCTION OF MULTI PURPOSE BUILDING ON 1st FLOOR OF INSPECTION BUILIDING IN SURYAGARHA BLOCK - SURYAGARHA.

Technical Sheet

Name of Work CONSTRUCTION OF MULTI PURPOSE BUILDING ON 1st FLOOR OF INSPECTION BUILIDING IN SURYAGARHA BLOCK - SURYAGARHA Cost of Work as per BOQ Rs. 15023385.00 Time of Completion in month 12 Months

Sl No. Items Requirement

Introduction of Tenderers Name of the tenderer(s) of tendering firm-telephone no., mobile no. & Email

Address of the head office in India - telephone no., mobile no. & Email

Address of the branch office in India

Nature of Constitution of the firm

Names of partners and their addresses.

1 Earnest Money As per NIT duly pledged in favour of District Engineer, Zila Parishad, Lakhisarai (Pay either online or offline)

Bid Security Amount - Rs. 300500.00 Bid Security Amount - Rs.

2 Time of Completion 12 Months

3 Registration No. AS PER NIT

4 Similar Nature of work (Minimum 10% of estimated amount) Minimum one similar work 1503000

5 GST & PAN AS PER NIT

6 Availability of Key equipment (either owned or leased or by procurement)

Type of equipment Max. age as on 28.02.2026 (Years) Nos. Required

Tractor / Tipper / Dumper 5 3

Mixture Machine 5 2

Water Tanker 5 2

7 Availability of Key personnel

Personnel Qualification Nos. Required

Site Engineer B.E Civil+07 Years Exp. Or retired A.E 1

Site Supervisor Fresh Graduate in civil or Diploma Civil + 03 years Experience or retired JE 1

8 Character Certificate issued from S.P. Office for all members AS PER NIT

9 Affidavit in required format as per NIT (Should be after the publication date of the tender) AS PER NIT

ABSTRACT OF COST

ZILA PARISHAD LAKHISARAI

योजना का नाम - जिला परिषद, लखीसराय के अधीन निरीक्षण भवन सूर्यगढ़ा प्रखण्ड - सूर्यगढ़ा मे प्रथम तल पर बहुउद्देशीय भवन का निर्माण कार्य।

S/No. Name of work Amount

1 Construction of Inspection Bhawan Main Building ₹ 13,512,398.00 6740312 ₹ 6,772,086.00

2 Construction of Septik Tank & Soak Pit ₹ 0.00

3 Boring with 1 H.P Submersible moter pump set ₹ 0.00

2 Plumbing & Sanitary Works ₹ 409,030.00

3 Electrical works ₹ 1,096,957.00

4 Marble Information Board & Photography ₹ 5,000.00

ZILA PARISHAD LAKHISARAI

योजना का नाम - जिला परिषद, लखीसराय के अधीन निरीक्षण भवन सूर्यगढ़ा प्रखण्ड - सूर्यगढ़ा मे प्रथम तल पर बहुउद्देशीय भवन का निर्माण कार्य।

S/No SOR Ref. 2022 Item of Works A/U Quantity Rate Amount Remarks

A Construction of Multipurpose Building

1 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 232.25 5670.00 1,316,858.00

2 5.22.7A Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500- 8mm dia. Kg 5710.95 94.50 539,685.00

3 5.22.7B Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500 Kg 9684.15 92.60 896,752.00 24817.16319 9.68415

4 5.22.7C Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 1297.80 90.80 117,840.00

5 5.22.7D Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-16mm dia. Kg 9754.50 91.70 894,488.00

6 5.22.7E Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-16mm dia. Kg 5044.20 91.70 462,553.00

7 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V Cum 165.51 5765.20 954,198.00

8 6.45.2 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 274.17 700.80 192,138.00

9 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. Sqm 925.04 437.50 404,705.00

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. Sqm 445.99 404.70 180,492.00

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts Sqm 399.24 494.40 197,384.00

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for. Stairs,(excluding landings) except spiral-staircaces Sqm 53.62 439.90 23,587.00

13 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand Sqm 1849.79 141.50 261,746.00

14 13.24.1 Cement plaster in course sand 6 mm cement plaster to ceiling of mix : 1:3(1 cement: 3 coarse sand) Sqm 806.39 131.30 105,879.00

15 13.13.4 Cement plaster in course sand 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 308.10 192.10 59,186.00

16 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1Cement: 2coarsesand: 4 graded stone aggregate 20mm nominal size) Cum 1.85 3998.10 7,396.00

17 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes Glazed Vitrified tiles Matt/ Antiskid finish of size of Tile 600 x 600 mm Sqm 89.62 1054.30 94,486.00

18 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge Sqm 274.42 795.00 218,164.00

26 10.6.1 Supplying and fixing-rolling shuters of approved make. made of required size of M.S. Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile stee wire of adequate strength conforming to IS:4454-part1 and M.S. top cover of required thickness for rolling shutters 80x1.25mm M.S. Laths with 1.25mm thick top cover Sqm 0.00 2673.70 0.00

19 13.80A.2 Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 2689.87 105.40 283,512.00

20 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sqm 2381.77 86.40 205,785.00

21 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. Sqm 1.11 34.60 38.00

22 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sqm 308.10 137.00 42,210.00

23 13.93.1 Painting with synthetic enamel paint of approved brandandmanufacturetogiveanevenshadetwoor more coats on new work (wood & steel) Sqm 74.97 84.50 6,335.00

24 10.12.1 + 10.13C Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3mm lugs 10cm long with steel lugs embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dip sand special metal-sash putty of approved make complete including applyin gap riming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. Extra for providing and fixing steel beading of approved shape and section with screws instead of glazing clips and met. Sash putty in steel doors, windows, ventilators and composite units. (Steel Ventilators.) Sqm 0.28 3444.20 964.00

25 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flat square or round bars etc all complete fixed to steel windows by welding. Kg 1297.50 144.50 187,489.00

26 9.147D.2 Providing and fixing factory made UPVC white colour sliding glazed window Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92x44mm & sash 32x60 mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm). Sqm 48.22 9471.00 456,692.00

27 9.21.1 Providing and fixing flush door shutters conforming to IS: 2202(Part-I) non-decorative type core of block board construction with frame of 1stclass hardwood and well matched commercial 3 ply veneering with vertical grains or cross band sand face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws. Sqm 30.89 1775.30 54,839.00

28 9.100.1 Providing and fixing alluminium handles, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm Each 30.00 57.10 1,713.00

29 9.97.1 Providing and fixing alluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed torequired colour or shade, with necessary screws etc. complete: 300 x 10 mm Each 30.00 111.40 3,342.00

30 9.96.1 Providing and fixing alluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300 x 16 mm Each 30.00 235.50 7,065.00

31 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp140mm internal dia, 73mm height, 5mm thick rim bottom and top lids,1.5mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed in to the cast iron box by means of 3.3mm dia round headed screws, one lockat the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 36.00 165.40 5,954.00

32 8.2.2.2 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 23.06 4401.20 101,492.00

33 8.13.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1cement :4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 695.81 3605.20 2,508,534.00

34 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 1.74 120526.60 209,716.00

35 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD-15: 2001( Part B) in factorymade frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Cum 0.74 107210.40 79,336.00

36 9.53 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with10mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15cm 1:3:6 mix (1cement :3coarsesand: 6 graded stone aggregate 20 mm nominal size) Each 42.00 130.80 5,494.00

37 12.45.3 Providing and fixing false ceiling with 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 24.22 993.00 24,050.00

38 10.36 Providing and fixing stainless steel (Grade304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 416.00 546.80 227,469.00

(i) Add extra cost of material for Munger Zone w.r.t Gaya Zone (as per BCD SOR) gaya munger

a. Fly Ash Bricks Nos 0.00 276.00 0.00 4852 5128 276

(ii) Add 5.36% for GST Diffrence Scheduled Items 610,002.00

Carriage of Material (Rates inclusive of GST & Labour cess)

a. Fly Ash Bricks Nos 97,252.00 2484.95 241,666.00 Bricks (Lead 7.0 Km Pakka & 1.0 Km Katcha)

b. Local Sand Cum 0.00 331.49 0.00 Local Sand (Lead 2.0 Km Pakka & 1.0 Km Katcha)

c. Coarse sand Cum 446.75 943.03 421,298.00 Coarse sand (Lead 8.0 Km Pakka & 1.0 Km Katcha)

d. Stone Chips Cum 199.05 3513.69 699,402.00 Stone Chips (Lead 140.0 Km Pakka & 1.0 Km Katcha)

e. Cement MT 209.52 545.84 114,363.00 Cement (Lead 5.0 Km Pakka)

f. Steel MT 31.49 545.84 17,189.00 Steel (Lead 5.0 Km Pakka )

(iv) Add Seigniorage Fee 27,846.00

Total Cost For Inspection Bhawan main building (A)= 13,512,398.00 #REF!

1 2.8.1 Earthwork in excavation in foundation trenches. All Kinds of Soil. Cum 21.51 360.70 7,759.00

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete Cum 0.00 287.30 0.00

3 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l Sqm 0.00 283.30 0.00

2 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Cum 1.48 3434.00 5,094.00

5 6.1.12/1 Brick work with bricks of class designation 100A in foundation and plinth in : Cement mortar 1:4 (1 Cement : 4 coarse sand) Cum 7.39 0.00

3 13.17.2 12mm cement plaster 1:4 (1cement : 4 coarse sand) finished with a floating coat of neat cement Sqm 37.90 192.20 7,285.00

4 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balcnies and access platform. Sqm 9.02 437.50 3,947.00

5 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) Cum 1.15 5961.90 6,831.00

6 5.22.7B Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 121.39 92.60 11,241.00

7 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks and S.W. drain pipe 100mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 33603.40 33,603.00

(i) Add extra cost of material for Munger Zone w.r.t Gaya Zone (as per BCD SOR) gaya munger

(ii) Add 5.36% for GST Diffrence 4,082.00

(iii) Carriage of Material (Rates inclusive of GST & Labour cess)

b. Local Sand Cum 0.00 331.49 0.00

c. Coarse sand Cum 3.75 943.03 3,533.00

d. Stone Chips Cum 2.37 3513.69 8,322.00

(iv) Add Seigniorage Fee 2,182.00

Total Cost For Septic Tank = 104,516.00 #REF!

C Boring Work (100mm x 150mm x 80mtr)

1 24.1.1.1 Boring/drilling bore well of required dia for caslng / strainer pipe by suitable method prescribed in IS:2800 (part-I) ncluding collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment's tools, plants & machineries required for the job, all complete ps per direction of Engineer-in-charge, up to 90 meter depth below ground level, 300 mm dia. Mtr 50.00 486.80 24,340.00

2 24.3 Supplying, assembling, lowering and fixing in vertica position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, confirming to IS:12818 including required hire and labour charges, fittings & accessoriesetc. All complete, for all depths, as per direction of Engineer-in-charge.

24.3.2 150 mm nominal size- Mtr 5.00 660.10 3,301.00

3 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen (RMS) pipe and ribs, confirming to IS:12818 including required hire and labour charges, fittings & accessoriesetc. All complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia- Mtr 20.00 573.10 11,462.00

4 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00

5 24,14 Providing and fixlng M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (Part-I) including necessary bolts and nuts of required size complete. 0.00

6 24.15 Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 0.00

7 24.8 Gravel packing in tubewel lconstruction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Cum 3.00 1,343.20 4,030.00

8 24.12 Development of tubewell in accordance with IS:2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge Hrs 5.00 916.80 4,584.00

9 24.3 Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.4 50 mm nominal size dia- Mtr 5.00 236.70 1,184.00

Total Scheduled Items = 64,420.00

Non Schedule Items

10 N.S Supplying fitting and fixing the same In poslllon 'as per approved specification and dlrection of E/l.

150 mm dia x 100 mm dia 6mm wall thickness UPVC reducer Nos 1.00 1,200.00 1,200.00

11 N.S Supplying fitting and fixing 1 H.P single phase Submersible pump as per approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 14,500.00 14,500.00

12 N.S Supplying fitting and fixing L&T control panel for 1 H.P single phase Submersible pump as per approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 4,500.00 4,500.00

13 N.S Supplying fitting and fixing 2.5 sqmm cable for submersible pump as approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Mtr 20.00 265.00 5,300.00

14 N.S Supplying fitting and fixing 2 inch dia MS Bend as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 175.00 175.00

15 N.S Supplying fitting and fixing 2 inch dia GI Nipple of 900 mm as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 3.00 605.00 1,815.00

16 N.S Supplying fitting and fixing adopter for submersible pump as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 1,950.00 1,950.00

17 N.S Supplying fitting and fixing 2 inch dia GI Socket as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 150.00 150.00

18 N.S Supplying fitting and fixing Hanging wire for submersible pump as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Mtr 30.00 25.00 750.00

Total Non Scheduled Items = 30,340.00

(i) Add 5.36% for GST Diff over Scheduled Items 3,453.00

Total Cost For Boring Work = 98,213.00

B Plumbing and Sanitary works

1 12.78.2 Providing and fixing on wall face unplasticised PVC (working pressure 4kgf per sqm) rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. 110 mm dia Mtr 200.00 257.50 51,500.00 120

2 12.80.2 Providing and fixing unplasticised- PVC pipe clip of approved design to unplasticised PVC rain water pipe /soilwaste and vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1cement: 4coarse sand and making good the wall etc complete for110mm dia pipe Each 80.00 182.72 14,618.00

3 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with manually controlled device (handle level)conforming to IS:7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the wall sand floors wherever required. WhiteVitreous China Orissa pattern WC pan of size 580 x 440 mm with integral type foot rest. Each 13.00 4,470.90 58,122.00

4 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type)with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 0.00 5,504.30 0.00

4 17.7.3 Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 7.00 2,530.30 17,712.00

5 17.10.1.2 Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I.bracket sand stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm Each 2.00 5,900.50 11,801.00

6 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia Each 15.00 104.40 1,566.00

7 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

17.32.1 Circular shape 450 mm dia Each 0.00 946.60 0.00

17.32.4 Rectangular shape 1500x450 mm Each 7.00 1,515.20 10,606.00

8 17.33 Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame withC.P. brass brackets and guardrail complete fixed with 40mm long screws, rawl plugs etc., complete. Each 7.00 713.30 4,993.00

9 18.8.1 Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Concealed work including cutting chases and making good the same. 15 mm nominal outer dia Pipes Mtr 100.00 278.20 27,820.00

10 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing o fpipes & fittings with one step CPVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.2 20 mm nominal outer dia Pipes (External work) Mtr 150.00 205.30 30,795.00

18.9.3 25 mm nominal outer dia Pipes (External work) Mtr 100.00 294.70 29,470.00

11 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and theba sesupport for tank. Ltr 3,000.00 9.70 29,100.00

12 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Each 20.00 715.10 14,302.00

13 18.55.2 Providing and fixing PTMT stop cock of approved quality and colour. 20mm nominal bore, 89mm long, weighing not less than 88 gms Each 30.00 113.80 3,414.00

14 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Each 15.00 190.10 2,852.00

15 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as pproved by Engineer in charge. Each 13.00 6,119.20 79,550.00

(i) Add 5.36% for GST Diffrence 20,809.00

Total Cost For Plumbing and Sanitary works (B)= 409,030.00

C Electrical works

1 1.3 Wiring for light point/exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I box etc as required. 6 Nos Light point, 2 Nos 5/6 amp socket

2 1.4 Wiring for twin control light point with 1.5 Sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable size G.I box etc as required. Each 20.00 1,248.00 24,960.00

3 1.5 Wiring for light /power plug with 2 x 4 sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit along with 1Nos 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. Mtr 450.00 309.00 139,050.00

4 1.7 Wiring of circuit /submain wiring alongwith earth wire with following sizes of FRLS PVC insulate copper conductor, single core cable in surface recessed steel conduit as required

1.7.3 2 x 4 sq.mm + 1 x 4 sqmm earth wire (For AC, Industrial Socket) Mtr 309.00 0.00

1.7.4 2 x 6 Sq.mm +1 x 6 Sq.mm each wire Mtr 422.00 0.00

5 1.30 Supplying and fixing metal/PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16A socket outlet and 5/6 &15/16A piano type switch, connections, painting etc. as required Each 10.00 306.00 3,060.00

6 1.27 Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required.

7 1.24 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc.

1.24.1 5/6 Amps switch Each 0.00 82.00 0.00

1.24.4 3 pin 5/6 A socket outlet Each 60.00 112.00 6,720.00

1.24.5 3 pin 15/16 A socket outlet Each 60.00 183.00 10,980.00

8 2.12 Supplying and fixing following rating, 240/145 volts "C" curve miniature circuit breaker suitable for loads of single pole in the existing MCB DB complete with connection, and commissioning etc. as required

2.12.3 40amp, Single pole and neutral Each 2.00 1,044.00 2,088.00

9 1.33 Supplying and fixing 3 pin, 5 amp celling rose on the existing junction box / wooden block including connection etc. as required Each 30.00 64.00 1,920.00

10 1.34 Supplying and fixing battan /angle holder including connection as required. Each 40.00 80.00 3,200.00

11 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Each 6.00 351.00 2,106.00

12 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

13 8.18.3 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required. 250 mm sweep (1300/1400 RPM) Each 5.00 2,288.00 11,440.00

14 3.2 Earthing with G.I earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Each 1.00 6,323.00 6,323.00

15 5.7 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driveretc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Electrical works (C)= 1,096,957.00

A Construction of Inspection Bhawan Main Building 13,512,398.00

B Plumbing & Sanitary Works 409,030.00

C Electrical works 1,096,957.00

D Marble Information Board & Photography 5000

ABSTRACT OF COST

ZILA PARISHAD LAKHISARAI

योजना का नाम - जिला परिषद, लखीसराय के अधीन निरीक्षण भवन सूर्यगढ़ा प्रखण्ड - सूर्यगढ़ा मे प्रथम तल पर बहुउद्देशीय भवन का निर्माण कार्य।

S/No. Name of work Amount

1 Construction of Inspection Bhawan Main Building ₹ 13,512,398.00 6740312 ₹ 6,772,086.00

2 Construction of Septik Tank & Soak Pit ₹ 0.00

3 Boring with 1 H.P Submersible moter pump set ₹ 0.00

2 Plumbing & Sanitary Works ₹ 409,030.00

3 Electrical works ₹ 1,096,957.00

4 Marble Information Board & Photography ₹ 5,000.00

ZILA PARISHAD LAKHISARAI

योजना का नाम - जिला परिषद, लखीसराय के अधीन निरीक्षण भवन सूर्यगढ़ा प्रखण्ड - सूर्यगढ़ा मे प्रथम तल पर बहुउद्देशीय भवन का निर्माण कार्य।

S/No SOR Ref. 2022 Item of Works A/U Quantity Rate Amount Remarks

A Construction of Multipurpose Building

1 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum 232.25 5670.00 1,316,858.00

2 5.22.7A Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500- 8mm dia. Kg 5710.95 94.50 539,685.00

3 5.22.7B Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500 Kg 9684.15 92.60 896,752.00 24817.16319 9.68415

4 5.22.7C Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 1297.80 90.80 117,840.00

5 5.22.7D Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-16mm dia. Kg 9754.50 91.70 894,488.00

6 5.22.7E Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-16mm dia. Kg 5044.20 91.70 462,553.00

7 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V Cum 165.51 5765.20 954,198.00

8 6.45.2 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 274.17 700.80 192,138.00

9 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. Sqm 925.04 437.50 404,705.00

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. Sqm 445.99 404.70 180,492.00

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts Sqm 399.24 494.40 197,384.00

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for. Stairs,(excluding landings) except spiral-staircaces Sqm 53.62 439.90 23,587.00

13 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand Sqm 1849.79 141.50 261,746.00

14 13.24.1 Cement plaster in course sand 6 mm cement plaster to ceiling of mix : 1:3(1 cement: 3 coarse sand) Sqm 806.39 131.30 105,879.00

15 13.13.4 Cement plaster in course sand 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 308.10 192.10 59,186.00

16 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1Cement: 2coarsesand: 4 graded stone aggregate 20mm nominal size) Cum 1.85 3998.10 7,396.00

17 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes Glazed Vitrified tiles Matt/ Antiskid finish of size of Tile 600 x 600 mm Sqm 89.62 1054.30 94,486.00

18 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge Sqm 274.42 795.00 218,164.00

26 10.6.1 Supplying and fixing-rolling shuters of approved make. made of required size of M.S. Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile stee wire of adequate strength conforming to IS:4454-part1 and M.S. top cover of required thickness for rolling shutters 80x1.25mm M.S. Laths with 1.25mm thick top cover Sqm 0.00 2673.70 0.00

19 13.80A.2 Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 2689.87 105.40 283,512.00

20 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Sqm 2381.77 86.40 205,785.00

21 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. Sqm 1.11 34.60 38.00

22 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sqm 308.10 137.00 42,210.00

23 13.93.1 Painting with synthetic enamel paint of approved brandandmanufacturetogiveanevenshadetwoor more coats on new work (wood & steel) Sqm 74.97 84.50 6,335.00

24 10.12.1 + 10.13C Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3mm lugs 10cm long with steel lugs embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dip sand special metal-sash putty of approved make complete including applyin gap riming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. Extra for providing and fixing steel beading of approved shape and section with screws instead of glazing clips and met. Sash putty in steel doors, windows, ventilators and composite units. (Steel Ventilators.) Sqm 0.28 3444.20 964.00

25 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flat square or round bars etc all complete fixed to steel windows by welding. Kg 1297.50 144.50 187,489.00

26 9.147D.2 Providing and fixing factory made UPVC white colour sliding glazed window Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92x44mm & sash 32x60 mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm). Sqm 48.22 9471.00 456,692.00

27 9.21.1 Providing and fixing flush door shutters conforming to IS: 2202(Part-I) non-decorative type core of block board construction with frame of 1stclass hardwood and well matched commercial 3 ply veneering with vertical grains or cross band sand face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws. Sqm 30.89 1775.30 54,839.00

28 9.100.1 Providing and fixing alluminium handles, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm Each 30.00 57.10 1,713.00

29 9.97.1 Providing and fixing alluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed torequired colour or shade, with necessary screws etc. complete: 300 x 10 mm Each 30.00 111.40 3,342.00

30 9.96.1 Providing and fixing alluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300 x 16 mm Each 30.00 235.50 7,065.00

31 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp140mm internal dia, 73mm height, 5mm thick rim bottom and top lids,1.5mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed in to the cast iron box by means of 3.3mm dia round headed screws, one lockat the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Each 36.00 165.40 5,954.00

32 8.2.2.2 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 23.06 4401.20 101,492.00

33 8.13.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1cement :4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 695.81 3605.20 2,508,534.00

34 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Cum 1.74 120526.60 209,716.00

35 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD-15: 2001( Part B) in factorymade frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Cum 0.74 107210.40 79,336.00

36 9.53 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with10mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15cm 1:3:6 mix (1cement :3coarsesand: 6 graded stone aggregate 20 mm nominal size) Each 42.00 130.80 5,494.00

37 12.45.3 Providing and fixing false ceiling with 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 24.22 993.00 24,050.00

38 10.36 Providing and fixing stainless steel (Grade304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 416.00 546.80 227,469.00

(i) Add extra cost of material for Munger Zone w.r.t Gaya Zone (as per BCD SOR) gaya munger

a. Fly Ash Bricks Nos 0.00 276.00 0.00 4852 5128 276

(ii) Add 5.36% for GST Diffrence Scheduled Items 610,002.00

Carriage of Material (Rates inclusive of GST & Labour cess)

a. Fly Ash Bricks Nos 97,252.00 2484.95 241,666.00 Bricks (Lead 7.0 Km Pakka & 1.0 Km Katcha)

b. Local Sand Cum 0.00 331.49 0.00 Local Sand (Lead 2.0 Km Pakka & 1.0 Km Katcha)

c. Coarse sand Cum 446.75 943.03 421,298.00 Coarse sand (Lead 8.0 Km Pakka & 1.0 Km Katcha)

d. Stone Chips Cum 199.05 3513.69 699,402.00 Stone Chips (Lead 140.0 Km Pakka & 1.0 Km Katcha)

e. Cement MT 209.52 545.84 114,363.00 Cement (Lead 5.0 Km Pakka)

f. Steel MT 31.49 545.84 17,189.00 Steel (Lead 5.0 Km Pakka )

(iv) Add Seigniorage Fee 27,846.00

Total Cost For Inspection Bhawan main building (A)= 13,512,398.00 #REF!

1 2.8.1 Earthwork in excavation in foundation trenches. All Kinds of Soil. Cum 21.51 360.70 7,759.00

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete Cum 0.00 287.30 0.00

3 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l Sqm 0.00 283.30 0.00

2 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Cum 1.48 3434.00 5,094.00

5 6.1.12/1 Brick work with bricks of class designation 100A in foundation and plinth in : Cement mortar 1:4 (1 Cement : 4 coarse sand) Cum 7.39 0.00

3 13.17.2 12mm cement plaster 1:4 (1cement : 4 coarse sand) finished with a floating coat of neat cement Sqm 37.90 192.20 7,285.00

4 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balcnies and access platform. Sqm 9.02 437.50 3,947.00

5 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) Cum 1.15 5961.90 6,831.00

6 5.22.7B Reinforcement for R.C.C. work including straightening, cutting ,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 121.39 92.60 11,241.00

7 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks and S.W. drain pipe 100mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 33603.40 33,603.00

(i) Add extra cost of material for Munger Zone w.r.t Gaya Zone (as per BCD SOR) gaya munger

(ii) Add 5.36% for GST Diffrence 4,082.00

(iii) Carriage of Material (Rates inclusive of GST & Labour cess)

b. Local Sand Cum 0.00 331.49 0.00

c. Coarse sand Cum 3.75 943.03 3,533.00

d. Stone Chips Cum 2.37 3513.69 8,322.00

(iv) Add Seigniorage Fee 2,182.00

Total Cost For Septic Tank = 104,516.00 #REF!

C Boring Work (100mm x 150mm x 80mtr)

1 24.1.1.1 Boring/drilling bore well of required dia for caslng / strainer pipe by suitable method prescribed in IS:2800 (part-I) ncluding collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment's tools, plants & machineries required for the job, all complete ps per direction of Engineer-in-charge, up to 90 meter depth below ground level, 300 mm dia. Mtr 50.00 486.80 24,340.00

2 24.3 Supplying, assembling, lowering and fixing in vertica position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, confirming to IS:12818 including required hire and labour charges, fittings & accessoriesetc. All complete, for all depths, as per direction of Engineer-in-charge.

24.3.2 150 mm nominal size- Mtr 5.00 660.10 3,301.00

3 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen (RMS) pipe and ribs, confirming to IS:12818 including required hire and labour charges, fittings & accessoriesetc. All complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia- Mtr 20.00 573.10 11,462.00

4 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00

5 24,14 Providing and fixlng M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (Part-I) including necessary bolts and nuts of required size complete. 0.00

6 24.15 Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 0.00

7 24.8 Gravel packing in tubewel lconstruction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Cum 3.00 1,343.20 4,030.00

8 24.12 Development of tubewell in accordance with IS:2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge Hrs 5.00 916.80 4,584.00

9 24.3 Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.4 50 mm nominal size dia- Mtr 5.00 236.70 1,184.00

Total Scheduled Items = 64,420.00

Non Schedule Items

10 N.S Supplying fitting and fixing the same In poslllon 'as per approved specification and dlrection of E/l.

150 mm dia x 100 mm dia 6mm wall thickness UPVC reducer Nos 1.00 1,200.00 1,200.00

11 N.S Supplying fitting and fixing 1 H.P single phase Submersible pump as per approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 14,500.00 14,500.00

12 N.S Supplying fitting and fixing L&T control panel for 1 H.P single phase Submersible pump as per approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 4,500.00 4,500.00

13 N.S Supplying fitting and fixing 2.5 sqmm cable for submersible pump as approved specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Mtr 20.00 265.00 5,300.00

14 N.S Supplying fitting and fixing 2 inch dia MS Bend as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 175.00 175.00

15 N.S Supplying fitting and fixing 2 inch dia GI Nipple of 900 mm as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 3.00 605.00 1,815.00

16 N.S Supplying fitting and fixing adopter for submersible pump as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 1,950.00 1,950.00

17 N.S Supplying fitting and fixing 2 inch dia GI Socket as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Nos 1.00 150.00 150.00

18 N.S Supplying fitting and fixing Hanging wire for submersible pump as per specifications and direction of Engineer-in-charge. (To be paid as per actual expenditure). Mtr 30.00 25.00 750.00

Total Non Scheduled Items = 30,340.00

(i) Add 5.36% for GST Diff over Scheduled Items 3,453.00

Total Cost For Boring Work = 98,213.00

B Plumbing and Sanitary works

1 12.78.2 Providing and fixing on wall face unplasticised PVC (working pressure 4kgf per sqm) rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. 110 mm dia Mtr 200.00 257.50 51,500.00 120

2 12.80.2 Providing and fixing unplasticised- PVC pipe clip of approved design to unplasticised PVC rain water pipe /soilwaste and vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1cement: 4coarse sand and making good the wall etc complete for110mm dia pipe Each 80.00 182.72 14,618.00

3 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with manually controlled device (handle level)conforming to IS:7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the wall sand floors wherever required. WhiteVitreous China Orissa pattern WC pan of size 580 x 440 mm with integral type foot rest. Each 13.00 4,470.90 58,122.00

4 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type)with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 0.00 5,504.30 0.00

4 17.7.3 Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 7.00 2,530.30 17,712.00

5 17.10.1.2 Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I.bracket sand stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 225 mm Each 2.00 5,900.50 11,801.00

6 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia Each 15.00 104.40 1,566.00

7 17.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

17.32.1 Circular shape 450 mm dia Each 0.00 946.60 0.00

17.32.4 Rectangular shape 1500x450 mm Each 7.00 1,515.20 10,606.00

8 17.33 Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame withC.P. brass brackets and guardrail complete fixed with 40mm long screws, rawl plugs etc., complete. Each 7.00 713.30 4,993.00

9 18.8.1 Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Concealed work including cutting chases and making good the same. 15 mm nominal outer dia Pipes Mtr 100.00 278.20 27,820.00

10 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing o fpipes & fittings with one step CPVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.2 20 mm nominal outer dia Pipes (External work) Mtr 150.00 205.30 30,795.00

18.9.3 25 mm nominal outer dia Pipes (External work) Mtr 100.00 294.70 29,470.00

11 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and theba sesupport for tank. Ltr 3,000.00 9.70 29,100.00

12 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Each 20.00 715.10 14,302.00

13 18.55.2 Providing and fixing PTMT stop cock of approved quality and colour. 20mm nominal bore, 89mm long, weighing not less than 88 gms Each 30.00 113.80 3,414.00

14 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter Each 15.00 190.10 2,852.00

15 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as pproved by Engineer in charge. Each 13.00 6,119.20 79,550.00

(i) Add 5.36% for GST Diffrence 20,809.00

Total Cost For Plumbing and Sanitary works (B)= 409,030.00

C Electrical works

1 1.3 Wiring for light point/exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I box etc as required. 6 Nos Light point, 2 Nos 5/6 amp socket

2 1.4 Wiring for twin control light point with 1.5 Sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable size G.I box etc as required. Each 20.00 1,248.00 24,960.00

3 1.5 Wiring for light /power plug with 2 x 4 sqmm FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit along with 1Nos 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. Mtr 450.00 309.00 139,050.00

4 1.7 Wiring of circuit /submain wiring alongwith earth wire with following sizes of FRLS PVC insulate copper conductor, single core cable in surface recessed steel conduit as required

1.7.3 2 x 4 sq.mm + 1 x 4 sqmm earth wire (For AC, Industrial Socket) Mtr 309.00 0.00

1.7.4 2 x 6 Sq.mm +1 x 6 Sq.mm each wire Mtr 422.00 0.00

5 1.30 Supplying and fixing metal/PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 and 15/16A socket outlet and 5/6 &15/16A piano type switch, connections, painting etc. as required Each 10.00 306.00 3,060.00

6 1.27 Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required.

7 1.24 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc.

1.24.1 5/6 Amps switch Each 0.00 82.00 0.00

1.24.4 3 pin 5/6 A socket outlet Each 60.00 112.00 6,720.00

1.24.5 3 pin 15/16 A socket outlet Each 60.00 183.00 10,980.00

8 2.12 Supplying and fixing following rating, 240/145 volts "C" curve miniature circuit breaker suitable for loads of single pole in the existing MCB DB complete with connection, and commissioning etc. as required

2.12.3 40amp, Single pole and neutral Each 2.00 1,044.00 2,088.00

9 1.33 Supplying and fixing 3 pin, 5 amp celling rose on the existing junction box / wooden block including connection etc. as required Each 30.00 64.00 1,920.00

10 1.34 Supplying and fixing battan /angle holder including connection as required. Each 40.00 80.00 3,200.00

11 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. Each 6.00 351.00 2,106.00

12 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

13 8.18.3 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required. 250 mm sweep (1300/1400 RPM) Each 5.00 2,288.00 11,440.00

14 3.2 Earthing with G.I earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. Each 1.00 6,323.00 6,323.00

15 5.7 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driveretc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Electrical works (C)= 1,096,957.00

A Construction of Inspection Bhawan Main Building 13,512,398.00

B Plumbing & Sanitary Works 409,030.00

C Electrical works 1,096,957.00

D Marble Information Board & Photography 5000