PROVISION OF RETAINING WALL FOR PARADE GROUND AT CHICOLNA GOA UNDER GE (I) CG GOA

Amount

Excavating over areas, n exc 1.5 m deep and getting out soft and distegrated rock Complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and 1.5 m deep in soft/ disintegrated rock and getting out Complete all as specified and directed.

PCC 1:3:6 type C2 using 40mm graded aggregate in foundation as specified and directed

Material & Labour for laterite block masonry of blockin well course, well bonded, and setting in mortar, complete set in cement mortar 1:4 Complete all as specified and directed.

Forming embankments incl raising (or lowering) earth, spreading in layers n exc 30cm thick, watering, ramming / rolling and finishing to required size, shape up to 3m Complete all as specified and directed.

Material and labour for stone pitching of random rubble, uncoursed, well bonded, laid dry in cement slurry in 1:3 Complete all as specified and directed.

Material and labour for mirror polishing the stone masonry and stone pitching as per the direction of Engr -in- Charge Complete all as specified and directed.

Material and labour for champhering the masonry as per the direction of Engr -inand as directed. end portion of the stone one Charge Complete all as specified and directed.

Supply only Mooram / red bajri filling Complete all as specified and directed.

Material & Labour RCC M-25 (20mm graded aggregate nominal mix ) for rcc bandss etc mass concrete Complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar Complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar Complete all as specified and directed.

Material & Labour for Providing precast cement concrete (Type BO :2:4 12.5mm grade aggregate set in CM 1:4) louvres and jallies (including frame) 25mm thick including all mouldings Complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Complete all as specified and directed.

Material & Labour for customised coloured wall tiles in vertical surface area not exc 0.36 sqm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Complete all as specified and directed.

Material & Labour for HDPE pipe of 50 mm dia bore of pressure rating 6 kgf/sqcm fixing to retaining wall as in weep hole Complete all as specified and directed.

Returning filing in including back fill and spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick for softl disintegrated rock Complete all as specified and directed.

Removing excavated meterial exc 50 m and n exc 250m depositing where directed at a level n exc 1.5 m above starting point in rocks Complete all as specified and directed.

Material & Labour for Precast cement concrete solid Block masonry in PCC 1:3:6 type C1, 20mm graded trap agg exc 10cm in width and setting in CM 1:6. Complete all as specified and directed.

PCC 1:3:6 type using 20mm graded stone aggregate in coping. Complete all as specified and directed.

Material & Labour for Rendering in CM 1:4 10mm thick on block masonry finished even and smooth without using extra cement Complete all as specified and directed.

Material & Labour for Extra forming fair finish to drains and channels 45 cm inner gith in cement concrete including forms , moulds , mitred/ stopped ends etc Complete all as specified and directed.

M/s Ekta Engineering Works (BID ID -3267312)