Construction and Upgradation of Gramin Bhnadar at Naldehra Development Block Masobra SH Architectural work and Ornamental work

Amount

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting einforcement bars.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead.

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness above 40 mm up to 75 mm

Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer?in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm

Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand).

Renewal of old putty of glass panes (length)

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in?Charge.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying vitrified tile skirting (100mm) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Slate floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

providing and fixing wooden false ceiling, consisting of 1.5 mm decorative laminate on 12 mm ply, at all heights including including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 1.5mm laminate on 12mm plyboard (with suitable adhesive) to , metal frame and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.

Providing and fixing wooden false ceiling, consisting of 4 mm decorative natural veneer on 12 mm ply, at all heights including including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 1.5mm laminate on 12mm plyboard (with suitable adhesive) to , metal frame and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge

Slate roofing with 7.5cm lap double layer fixed on wooden battens (wood works to be paid for seperately)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0 mm thick instead of 4 mm thick.

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L?Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (MS FRAME)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L?Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) WINDOW- W1 (MS FRAME)

Toughened glass 12 mm thickness

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Melamine polishing on wood work (one or more coat).

DOOR MECHANISM COMPONENTS:- Allowance for supply and installation of Wood Sliding Folding System with top and bottom sliding accessory of good load bearing capacity of minimum 50kg/panel, High Quality guide rollers should be used to avoid voice while sliding, make - Hettich, Hafele, Ebco or equivalent specifications mentioned, complete in all respect as directed/approved by Engineer-in-charge.

TYPE A1 Unit - CASH COUNTER :- Providing and Fabricating Unit of size 3.15(L) X 1.05m(H) and 0.55m Depth, made with HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard, Veneer and 1mm Thk. Laminate should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer.

TYPE E1 Unit - DISPLAY UNIT :- Providing and Fabricating Unit of size 1.05m(W) X 2.40m(H) and 0.3m Depth, made with 25 mm X 25 mm X 2.6 mm M.S. Hollow Section having MOI 1.72, Elastic Modulus minimum 1.38 and 18 mm Thk. HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum., using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete as per direction of Engineer-in- charge. . Final Finishing of unit is Pigmented 2K P.U. Paint and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F06 for Details)

TYPE E2 Unit - DISPLAY UNIT :- Providing and Fabricating Unit of size 1.05m(W) X 2.40m(H) and 0.35m Depth,made with 26.90 Outer Dia. M.S. Hollow Circuar Section of 2.90 Thickness, having minimum Mass 1.72kg/m, Elastic Modulus minimum 1.19 and 18 mm Thk. HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum., using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete as per direction of Engineer-in- charge. Final Finishing of unit is Pigmented 2K P.U. Paint and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F07 for Details)

TYPE E4 Unit - DISPLAY UNIT :- Providing and Fabricating Display Hanging Cloth Unit of size 1.05m(W) X 2.40m(H) and 3.25m Depth, made with 26.90 Outer Dia. M.S. Hollow Circuar Section of 2.90 Thickness, having minimum Mass 1.72kg/m, Elastic Modulus minimum 1.19 and 18 mm Thk. HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum., provision of light box as per drawing made with using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Final Finishing of unit is Pigmented 2K P.U. Paint, Printed Flex and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F09 for Details)

TYPE N1 Unit - BOUTIQUE CAFE DISPLAY UNIT :- Providing and Fabricating Display Unit of size 2.00(L) X 1.05m(H) and 0.60m Depth, made with HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard and 1mm Thk. Laminate should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer.

TYPE P3 Unit - DISPLAY UNIT :- Providing and Fabricating Box Sheving for Unit of size 3.14(L) X 2m(H) and 0.40m Depth, made with HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard and Natural Decorative Veneer should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F03 for Details)

TYPE Q1 Unit - DISPLAY UNIT :- Providing and Fabricating Display Unit of size 0.8)L) X 2.28m(H) and 0.47m Depth, made with HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard, Veneer and 1mm Thk. Laminate should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F04 for Details)

TYPE Q2 Unit - DISPLAY UNIT :- Providing and Fabricating Display Unit of size 0.89(L) X 2.28m(H) and 0.42m Depth, made with HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard, Veneer, Looking Mirror and 1mm Thk. Laminate should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer. (Refer to Drawing No. F05 for Details)

TYPE CU1 - DISPLAY AND STORAGE UNIT :- Providing and Fabricating Unit of size 1.8m(W) X 0.90M(H) X 0.60m(D) made of HDHMR Plyboard made of wood fibre/wood chips and synthetic thermosetting resin in a homogeneously spread MAT & pressed in temperature and pressure controlled press, minimum density 840 Kg/cum. 18 mm Thk. HDHMR Plyboard, Veneer and 1mm Thk. Laminate should be used for fabrication of the unit, using adhesive and necessary nails/screws and other materials, finishing as per specified in Drawing, complete in all respect as per direction of Engineer-in- charge. Final Finishing of unit is Pigmented 2K P.U. Wood Coatings and Laminate NOTE : All samples to be submitted for approval from the architect / designer.

SIGNAGE BOARD :-Providing and Installing outdoor Lit Signage Board of Dia. 1.5m, complete as per direction of Engineer-in- charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.10.3 Group -C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.10.3 Group -C

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25mm dia PVC conduit

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 pair UTP CAT 6- 2 run of Cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 pair UTP CAT 6- 2 run of Cable

LIGHTING FIXTURE ADL1 :- Supply and Installation of Adustable COB light of IP20 ceiling recessed linear fixed down light; light fixture should have maximum wattage of 10W and 3000K.LED is set back to minimize glare. Housing is made of die-cast aluminium with a radiant surface that guarantees optimum heat dissipation. reflector - flood optic. Structure with die-cast aluminium external contact frame with a single white finish. Quick and easy tool free assembly. Outer trim of Light fixture should have option of white and black finish. Inner Raster finish should have an option of black & white, complete in all directed/ approved by Engineer-in-Charge.

LIGHTING FIXTURE WL1 :- Supply and Installation of wall light of IP67, light fixture should have maximum wattage of 10W and 3000K, LED is set back to minimize glare, complete in all directed/ approved by Engineer-in-Charge.

STRIP LIGHT WITH PROFILE :- Supply and Installation of LED Strip Light with 16mm Alluminium and acrylic profile. Lighting up the Ceilling by using LED Profile and LED Strip light. The strip light installed in such a way which is highlighting the gypsum ceiling horizontally. Supply of IP20 LED Strip light with maximum wattage 4.8W per meter CRI >80 with mimimum lumen output of 580lm/m, color temperature 4000K. LED Strip can be installed using mounting profile available in U & L shape profile as per requirement. Profile should have an option of clear or milky white diffuser.Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge.

CHANDELIER :- Supply and Installation of Decorative Chandelier as per approved by Designer/Architect, The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge.

HANGING LED BULBS FIXTURES :- Supply and Installation of Decorative Hanging LED Lighting fixture as per approved by Designer/Architect, The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge.

DECORATIVE LIGHTS UD1:- Supply and Installation of Outdoor Decorative wall Light of upward focus of IP67, light fixture should have maximum wattage of 10W and 3000K, LED is set back to minimize glare, The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge. Make: Phillips, Jaquar or equivalent complete in all directed/ approved by Engineer-in-Charge.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing Cable End Boxes (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with testing and commissioning etc. as required.

For 8 way, Double door SPN MCBDB

For 10 way, Double door SPN MCBDB

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size550x400 mm with a 15 mm CP Brass single hole basin mixer

Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Plumbing intel & outlet concealed plumbing line for toilet , pantry etc. including all sanitary & plumbing fitting ,nahani trap etc complete.

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in?Charge . Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

WATTLE AND DAUB WALLS :- Supply and Installation of Wattle and Daub Walls using method of constructing walls in which vertical wooden stakes, or wattles, are woven with horizontal twigs and branches, and then daubed with clay or mud. as per approved by Designer/Architect, complete in all directed/ approved by Engineer-in-Charge.

CORTEN STEEL:- Supply and Installation of Corten Steel of 2mm thickness, a weathering steel is a cold rolled steel alloy that forms its own protective layer. It must be installed as per drawings and as per approved by Designer/Architect, t complete in all directed/ approved by Engineer-in-Charge.

DECORATIVE LIGHTS UD1:- Supply and Installation of Outdoor Decorative wall Light of upward focus of IP67, light fixture should have maximum wattage of 10W and 3000K, LED is set back to minimize glare, complete in all directed/ approved by Engineer-in-Charge.

DOOR MECHANISM COMPONENTS - SLIDING FOLDING SYSTEM:- Allowance for supply and installation of Wood Sliding Folding System with top and bottom sliding accessory of good load bearing capacity of minimum 50kg/panel, High Quality guide rollers should be used to avoid voice while sliding, complete in all respect as directed/approved by Engineer-in-charge.

Gaurav Kumar

Sachin Kumar