EDD HAPUR KANWAR YATRA WORK

PCC Pole 8.5 Mtr long (Carriage & Erection)

PCC Pole 11 Mtr long (Carriage & Erection)

STP Pole 13 Mtr long (Carriage & Erection)

Repairing and strengthening of rusted/corroded Steel Tubular (ST) Pole (9/11/13 Mtr.) at ground level by cutting, cleaning and welding of additional MS Channel/Angle/Iron Strip of approved size and section to the damaged portion of pole for restoration of mechanical strength and stability, including drilling, fitting, welding, grinding, anti-corrosive treatment, painting of repaired portion, necessary excavation around pole base and backfilling after completion of work. The required Channel/Angle/Iron Strip, welding electrodes, consumables, labour, T&P and all other materials shall be arranged by the contractor. Complete in all respects as per RESPO/REC norms and directions of Engineer-in-Charge.

Pulling, re-sagging, tightening and tensioning of loose conductor/AB Cable or newly provided LT/HT conductor in existing overhead line, span-wise, including opening and refixing of binding, jumper connections, insulators and associated hardware as required, maintaining proper sag and statutory ground clearance in accordance with CEA Safety Regulations and standard line construction practices, including all labour, tools & plants, safety precautions and incidental works required for satisfactory completion of the job. Complete in all respects as per RESPO/REC norms and directions of Engineer-in-Charge.

Straightening of tilted LT/HT PCC/STP/ST Poles by excavation around pole base, providing and compacting approved quality gitti, boulders, stone ballast and other suitable packing materials at pole foundation, tightening/adjustment of existing stay set and stay wire, ramming and dressing of excavated earth to restore the pole in true vertical position, including all labour, tools & plants, transportation and incidental works. Packing materials shall be supplied by the contractor. Complete in all respects as per RESPO/REC norms and directions of Engineer-in-Charge.

Cutting, trimming and lopping of tree branches and vegetation fouling or dangerously close to existing 11 KV/33 KV overhead lines for maintaining statutory electrical clearances and ensuring safe, reliable and uninterrupted power supply, including climbing, pruning and removal of obstructing branches/trees, collection, loading, transportation and disposal of all cut tree material, logs, branches, leaves and other debris at a safe location approved by the Engineer-in-Charge. The work shall also include complete cleaning of roads, pathways, shoulders and surrounding areas affected during execution of the work, leaving the site neat and tidy. The contractor shall take all necessary safety precautions and arrange all labour, tools & plants, safety equipment, transportation and incidental materials required for satisfactory completion of the work. Complete in all respects as per RESPO/REC norms and directions of Engineer-in-Charge.

Providing and fixing earthing for LT/HT PCC/STP/ST Poles using approved size GI Earth Rod/GI Pipe Electrode, including excavation of earth pit, installation of earth electrode, backfilling with suitable soil and watering, providing and fixing GI earth wire/strip from earth electrode to pole body with necessary clamps, nuts, bolts and accessories, making proper electrical connection and testing to achieve earth resistance within permissible limits as specified under IE Rules, CEA Safety Regulations and relevant standards. The GI Earth Rod/GI Pipe Electrode and all associated materials shall be supplied by the contractor. Complete in all respects including labour, T&P, testing and commissioning as per RESPO/REC norms and directions of Engineer-in-Charge.