CONSTRUCTION OF OPD AND IPD CHC COMPLEX BUILDING AT KESINGA

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used .A/R-2006,P.No-196,Item No-3BUILDING PROPER

Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge BUILDING PROPER

Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge BUILDING PROPER

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge. BUILDING PROPER

Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge. BUILDING PROPER

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment) including cost of all materials, labour, T&P etc complete in all respect and as per direction of the Engineer-in-charge. BUILDING PROPER

Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, and royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge BUILDING PROPER

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor

Head Room(S+1)

Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor

R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement Footing

Plinth Beam

COLUMN Ground Floor

Head Room(S+1)

LINTEL Ground Floor

Head Room(S+1)

ROOF BEAM Ground Floor

Head Room(S+1)

ROOF SLAB Ground Floor

Head Room(S+1)

CHAJJA Ground Floor

Head Room(S+1)

STAIRCASE Ground Floor

25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. Head Room(S+1)

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment. in Ground Floor Ground Floor

HR(FIRST FLOOR)

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. Ground Floor

Head Room(S+1)

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

Head Room(S+1)

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

Head Room(S+1)

Finishing surface of Ceiling with cement based putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor Ground Floor

Head Room(S+1)

Supplying fitting & fixing of 32mm thick flush door shutters with flush door block board 'A' premium 32mm thick both side teak (Green ply / Allwin) both side laminated with 4 mm thick veener board (Teak Heritage) (Archid ply/ Green ply ) by using adhesives, with all labour, iron fitting & wooden hinged cleats etc. fitted & fixed complete in all respect, including cost of iron fitting , alluminum fittings, all labours, T&P etc. as per specification approved by the Department & as per direction of the E.I.C. SE no 284 dt 27.02.12 for Chief Secretary. Ground Floor

Head Room(S+1)

Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete Ground Floor

Supplying and fitting and fixing of two track UPVC sliding window of of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures. Ground Floor

Head Room(S+1)

Aluminium Framed louvered ventilator, with all necessary hardware fitting & fixtures etc complete as per the direction of E.I.C. Ground Floor

Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622-2006 (Group-B) of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. Ground Floor

Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. Ground Floor

Providing and laying in floors Non-skid matt finish ceramic tiles size 400mm x 400mm without warpage of Nitco, somany, Naveen, Kajaria in approved colour in floors and stairs over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade rounding the edges of tiles in steps including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge . (Note- Sample of tiles shall be approved before procurement and use.) Ground Floor

Supplying, fitting & fixing of 30cm x 30cm/20cm x 20cm special plain/printed series Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge Ground Floor

Providing for Supplying, fitting & Fixing of 8-10 mm thick & size of 300 mm x 300 mm industrial floor tiles in floors approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand ) and filling jointed with slurry including cost of all materials, labour T&P etc. Required for the work all complete as per direction of the Engineer-in-charge. Ground Floor

Providing and fixing 20mm thick Granite stone floor Tiles (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & Grooving etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Ground floor

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge Ground floor

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, royalities of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor

External Wall

Internal Wall

Painting two coats with plastic emulsion paint to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor

Head Room(S+1)

Wall painting two coat with any approved weather coat paint including cost of all materials labour and T&P require for the work etc. complete as directed by the EIC. Ground Floor

Head Room(S+1)

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. All floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. Ground Floor

Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1) Ground Floor

Head Room(S+1)

Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. Ground Floor

Head Room(S+1)

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm.cross T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall/partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in- Charge.(cpwd 2019, code 26.22.1) (Make :-Aeroceil/BSW Calsi/Duxon). Ground Floor

Supply and installation of Stainless steel ceilings are the safest when it comes to sanitizing and disinfecting. So easy to wash and wipe often and the results visible to all from housekeeping to auditors to patients and doctors alike. Well, Serge Astral SS does duty in this ICU. Clip-in tiles, Sj having 600x600x0.6mm having weight 2kg/m2, square edge, bulkheads made up of SS Material sheets installed in ceiling using Spring-T system.Spring-T system of 600x600mm module includes Skelet WA15W30, sectional thickness 0.4mm, with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then Hold-on ceiling clamp hung from the soffit at 600mm centers bothways with Hanger rod and soffit cleat.Strut Spring-T is then held in position by hold-on clamp @ every 600mm centers. Astral Plus Clip-in ceiling tiles 600x600x0.6mm are then clipped into Spring-T."Technical Parameters. Fire (Class) - A. Acoustics - nil (For E300 Mounting) • Thermal conductivity (W/mk)- na. Climate (°C, RH) - 50, 99. Light reflectance (%) -75. Green (VOC, RC %) - Low, 25, Finish-M HAS Anti Bacterial H+V+, including cost of all materials, all sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge. Ground Floor

Providing and fixing of OT Door frames must be formed of 1.2 mm thick Stainless Steel (SS) Grade 304 No.4 Finish sheet with a single rebate profile of 100 x 62 mm. Frames must be mitered or butt fastened, and field assembled using self-tabs or nuts and bolts. To receive the proper hardware, every provision should be mortised, drilled, and tapped. Back plate brackets and anchor fasteners should be included with frames for installation on a finished plastered masonry wall opening with Door leaf of 46mm thick double skin door is designed to fit flush into the wall panel system and is supplied in different dimensions. Doors are fabricated from 0.8mm Stainless Steel (SS) Grade 304 No.4 Finish sheets. The GI sheets are resin bonded with honeycomb core as an infill material. The doors are factory CNC fabricated with all necessary provisions for receiving hardware such as hinges, locks and door closers. Double Glazed View Panel of 5mm glass shall be provided as per requirement. For double leaf doors, integrated astragals must be provided on the meeting stile for both the active and inactive leaf. Optional hardware such as Single/Double Point Panic bars can be provided as per client requirement. Optional Infill of Rockwool can be provided for better insulation as per client requirement, Doors can also be internally lined with 2mm Lead sheet to prevent from radiations as an option. DOOR HARDWARE:-SS 304 Ball bearing Butt Hinges, Door Closer, Mortise Locks,SS 304 D' Handle on both sides,Single/Double Point Panic Bar with External Trim,Automatic drop bottom seal,Vision Panel (Double Glazed), including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per direction of Engineer-in-Charge. Ground Floor

Supply & Installation of Lead line door.Door Leaves Constructed from 1.20mm .Thick Galvanized Steel Sheet fromed to provied a 46mm thick fully flush,doubleskin door shell with Lock Seam joints at stile edges. In-fill of PUF including 2.0mm lead sheet (PolyUrethanes Foam) is used to give the required rigidity and effective acoustic and thermal insulation.DOOR FRAMES Produced from 1.6mm thick galvanized steel sheet formed to double or single rebate profile of size 143 X 57,105mm X 60mm. & 100 x 57mm and we are insert 2mm lead sheet in the door frame. The Door frames maybe built in to the brick or block walls using corrugated "T" anchor not welded to the frames (First Fix). Frames may also be fixed on plastered openings with the help of Anchor Fasteners (Second Fix).Door Frames supplied to knockdown from with butt joints for Bolted assembly at site. Including cost of all materials, all labour,sudries, T&P etc.Complete in all respect as per direction of Engineer-in-Charge. Ground Floor

Providing and fixing factory made 100% solid WPC (Wood Polymer Composite) door frame 125mm x 65mm single rebated made from wood polymer composite (Single extruded process) material comparising of virgin PVC polymer of K value 57-60(Suspension grade) calcium carbonate and natural fibers (Wood Powder / Rice Husk / Wheat husk) and non-toxic additives fabricated with metre joint after applying PVC sulvant cement and screwd with full body treaded start headed screw having minimum frame density of 780kg per/Cbm and an ISO 9001-2015 certified company having good screw holding capacity (Screw withdrawal strength of (minimum 990N)), minimum compressive strength of 58N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, Water/moisture proof and fire retardant and fixed in position with SS dash fasteners/ Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentication should be compulsaryly provided by the manufacturing company. Ground Floor

HR (FIRST FLOOR)

Dismantaling brick or stone masonary in lime or cement mortar above 3 mtr height including stacking the useful materials for reuse and removing the debris within 50m lead. including cost of all Labour, Sundries,T&P etc. complete in all respect as per approved drawings and as directed by the Engineer-in-charge . (No seperate payment will be made for execution of this item of work in any shape)

Dismantling and removing RCC columns,beams,slab,staircase landing,lintels including stacking the useful materials for reuse and removing the debris within 50m lead. including cost of all Labour, Sundries,T&P etc. complete in all respect as per approved drawings and as directed by the Engineer-in-charge . (No seperate payment will be made for execution of this item of work in any shape)

Dismantling and removing doors,windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead including cost of all Labour, Sundries,T&P etc. complete in all respect as per approved drawings and as directed by the Engineer-in-charge . (No seperate payment will be made for execution of this item of work in any shape)

Transportation / Carriage of Debris materials OR Surplus excavated materials i.e Disintegrated Rocks, Hard Rocks, Hard Soil ,Gravel Soil,Ordinary Soil,Stoney Earth etc. away from the proposed construction work site and depositing the same within minimum lead of 5 K.M by Mechanical means including loading, unloading , hire & running charges of the truck/tipper/tractor to be required for shifting/carriage, cost of all Labour,Sundries, T&P etc as directed by the Engineer-in-charge.

GPH Works: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. Ground floor 15mm mm CPVC (sdr-13.5) pipes (Astral/ashirbad/Finolex)

20 mm CPVC (sdr-13.5) pipes (Astral/ashirbad/Finolex)

25 mm CPVC(sdr-13.5) pipes (Astral/ashirbad/Finolex)

32 mm CPVC sch-80 pipes (Astral/ashirbad/Finolex)

40 mm CPVC sch-80 pipes (Astral/ashirbad/Finolex)

25 mm CPVC(sdr-13.5) pipes (Astral/ashirbad/Finolex)

32 mm CPVC sch-80 pipes (Astral/ashirbad/Finolex)

40 mm CPVC sch-80 pipes (Astral/ashirbad/Finolex)

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. GroundFloor :- 250 mm thick wall

First Floor :- 250 mm thick wall

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge. Ground Floor :- 250 mm thick wall

First Floor :- 250 mm thick wall

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. Ground Floor

First Floor

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Jaquar/Johnson/ Hindware make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange (JAQUAR) KUP-35041PM

Supplying all materials, labour, T&P and fixing standard sized Bib cock of Jaquar/Johnson/ Hindware make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Bib Cock (JAQUAR) KUP-35037PM

Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Jaquar/Johnson/ Hindware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar-KUP-35053PM

Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock (JAQUAR)KUP-35001PM

Fixing of 25mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)

Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve (shakti make)

Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve(shakti make)

15mm dia PVC connection pipe 450 mm long

15mm dia CP Extention Nipple

15mm dia CP flange

20mm dia CP consealed stop cock(Jaquar)(FLR-CHR-5227)

Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and fixing Health Faucet of Jaquar/Johnson/ Hindware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge. 15mm dia CP Health Faucet of Jaquar Model RangeALD 565.

Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete 10x4.90

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge. 2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank (on the roof of Ground floor)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. In Building 110mm diameter U-PVC SWR pipes (Astral/ashirbad/Finolex )

110mm U-PVC door Tee

110mm U-PVC offset

110mm U-PVC door bend

110mm U-PVC plain shoe bend

110mm U-PVC vent cowl

110mm P-trap

110mm U-PVC plain bend

100mm S/S coupling with EPMD

75mm diameter U-PVC SWR pipes(Astral/ashirbad/Finolex )

75mm U-PVC plain Bend

Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge. 250mm to 375mm thick wall (Ground .Floor)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Jaquar/Johnson/ Hindware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. 10 Liters capacity PVC cistern with 32mm dia flush bend. sleek fresh single flush Starwhite, Size 47.6 X 15.5 X 32.5 cm

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (Wall hung European type W.C. pan) of Jaquar/Hindware/Johnson make with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. Reamless single piece EWC with 'p' / S trap plain JAQUAR Model No-VGS-WHT-81853S300UF

Supplying all materials, labour T&P and fixing wash basins of Jaquar/Hindware/Johnson with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. Wall hung Wash Basin with half pedestal- JAQUAR Basin Model No-FNS-WHT-40801

Half Pedestal Model No FNS-WHT-40305

Supplying all materials, labour, T&P and fixing standard sized Single Lever Basin Mixer of Jaquar/Johnson/ Hindware make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Single leaver Basin Mixture without Popup (JAQUAR) OPP-15011BPM

Supplying all materials, labour, T&P and fixing Flat back large pattern urinal of Jaquar/Hindware/Johnson the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Flat back large urinal JAQUAR Model No URS-13261H

15mm dia Urinal spreder

32mm dia Dome wate

Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Fixing of squatting urinal (Parryware/Hindware/Neycer)

Supply and fixing all materials, labour, T & P and providing urinal partition with italian collection (pastel)- size- 75x16.5x36.5 cm Cat no-61005 etc all complete as per direction of the Engineer-In-Charge. Make-Hindware.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. size(6x0.75x0.60)

Supplying all materials, labour, T&P and fixing standard size glass-shelf of Hindware/Jaquar/Parryware with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. glass shelf Jaquar-ACN-1171 N 600mm long

Supplying all materials,labour, T&P and fixing standard sized CP Towel Rack with Lower Hanger(Stain Steel)CP/ brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge CP Towel Rack with lower hanger( Stainless Steel) with 3 Hooks (Chrome Finish)(Jaguar Model No AHS-CHR-1581H.

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel ring Square complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge. Jaquar-ACN-1121N

Supplying all materials, labour, T&P and fixing standard sized Chromium Plated Shower Bracket small of Jaquar/Hindware/Johnson complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge Jaquar-ACN-1177N

Supplying all materials, labour, T&P and fixing standard sized Soap Dispensor of Jaquar/Hindware/Johnson complete with all as per specification and direction of the Engineer in charge. Soap dispense with Glass Bottle. CAN-1135N.

Providing and fixing porcelain sink of Jaquar/Hindware/Johnson with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. size 510 X 1040 mm bowl depth 178 mm.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Single lever elbow operated sink mixer of Hindware/Jaquar/Jonhnson of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. Jaquar Model NoFLR-5166.

Supplying & fixing of Matrix Set-1 Mat code-70002,EWC : (P-18) (WB 46X36 with one pair mounting brackets, EWC & cistern complete with fittings & seat cover, one no hinged rail 76 cm and 4 nos of grab rail 60cm complete with all as per specification & direction of the Engineer in charge.

Supply all materials, labour, T&P and providing fitting & fixing (Aqua guard) pure Chill 80 PSS UV of size 750x570x1350 mm height with water storage capacity 120 liters along with 2 nos of fancets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc. all complete as per approved drawing, specification and direction of the EIC.

Supplying all materials, labour, T&P and fixing 100 mm dia wall mounted over head shower & Shower arm Jaquar/Hindware/Johnson including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge. 100 mm dia CP Overhead shower Jaquar-CHS1989, Shwer Arm ,Jaquar SHA 483

PH Work:- Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge. 250mmx250mm with RCC cover

Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge Inside size 760mm x760mm x450mm

Adl Depth

RCPC Cover

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. 110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge. Inside size 900mmx900mmx900mm

addl depth of 0.30m upto 4.50m depth

RCPC Cover

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer-In-Charge RCC rings soakway pit 1.8m dia x 2.6m deep

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only 00 mtr to 30mtr

30 mtr to 45mtr

45 mtr to above

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 00 mtr to 30mtr

30 mtr to 45mtr

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)

DOL Control panel

40mm dia steel short piece

Well cap

50mm size CI bracket

2.50sqmm flat cable

20mm dia rigid UPVC pipes

Steel rope with cover

Labour charges for lowering including transportation

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make)

Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works up to and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. S. Tank

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15 cm in depth : consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.S. Tank

Supplying of filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of E.I.C. S. Tank

Providing and laying plain cement concrete 1:3:6 (1 cement:3 sand: 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. S. Tank

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge S. Tank ,Inlet & outlet chamber

Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Septic tank

Septic tank

c) Slab

Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge.Cold Twisted bars, Thermo-Mechanically-treated bars. Base,Wall/beam,Slab

First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge Brick work in inlet & outlet chamber

12mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4 fine sand) including neat cement punning & necessary scaffolding, curing etc. all complete at all floors and all heights. Tank-1

Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with OPC 53 grade cement finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. Plaster in inlet & outlet chamber

Supplying all materials, labour, T&P and providing , fitting & fixing 100mm x100mm x100 mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge SW Tee

Supplying all materials ,labour, T&P and making MS STEP IRON IN 20MM diameter MS steel bars & fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. MS Steps irons

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider Zencelo/Eq.)With 10years warenty. Group C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.) Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.) Group B

Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.) Group C

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. 25Nos for Stage Light,3Nos For Aquaguard.

Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.

Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group B

Call bell point with call bell.

Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Recessed wiring to submain in 4 x 16 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.)

Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)

Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping)

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions. Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A 4P MCB (10KA) Outgoings-6 A SP MCB 10KA- 12 Nos,(Make-L&T/ Schneider/Hager/Legrand/eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A 4P MCB (10KA) Outgoings-16/20 A SP MCB 10KA- 12 Nos,(Make-L&T/ Schneider/Hager/Legrand/eq)

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ Hager/L&T/SIEMENS/Eq. MAIN PANEL with 150A 4P MCCB 25KA -1 No as incomer,160A 4P Changeover Switch 1 nos, 63A 4P MCCB 25KA 3Nos,80A 4P Change Over Switch 1Nos. 40A 4P MCB 10KA- 6Nos, with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB.

PUMP DB with 63A 4P MCB (10KA) -1 No as incomer ,32A 4P MCB 10KA-2Nos, 20A DP MCB 10KA-3 Nos as Outgoing with E.C Busbars .

EXT Light DB with 63A 4P MCB (10KA) -1 No as incomer, 1Nos Timer Switch ,20A SP MCB 10KA-6 Nos,20A DP MCB 10KA-9 NOS as Outgoing with E.C Busbars .

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 70 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)

Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable/Eq)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5C x 70 sq.mm

4C x 16 sq.mm

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.

Supply & fixing of lightning arrester of size 2.6' length made of 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods of 0.3" diameter with suitable size of nuts and bolts.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-JAQUAR/philips/wipro/Bajaj/Equivalant Ceiling mounted 18W LED Square Recessed/Surface light Similar to JAQUAR Cat No. LNEP01S018XC or equivalent Model of philips/wipro/Bajaj/Equivalant.

Ceiling mounted 36W LED 2'X2' Recessed/Surface light Similar to JAQUAR Cat No. LULT10S036XC or equivalent.Model of philips/wipro/Bajaj/Equivalant.

Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to JAQUAR Cat No.CWLL01V109XX or equivalent.Model of philips/wipro/Bajaj/Equivalant.

Supply, Installation, testing and commissioning of 10W Mirror Light Similar to JAQUAR Cat no-LTBL01X010XC/Equivalent.Model of philips/wipro/Bajaj/Equivalant.

Supply, Installation, testing and commissioning of ENTRY EXIT LIGHT Double side LED SIMILAR TO BAJAJ CAT. NO-BESL 03 LED DSD WBB GREEN /Equivalent.Model of philips/wipro/Equivalant.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.Make-USHA/Havells/Orient/Cromptorn Equivalant.

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.Make-USHA/Havells/Orient/Cromptorn Equivalant.

Ceiling mounted indoor type batten type LModel of philips/wipro/Bajaj/Equivalant.ED Luminaire with LED Lamp Similar to JAQUAR Cat No. LGLZPCX022XW or equivalent.

Supply, Installation, testing and commissioning of Wall fan of 400 mm sweep, etc as required.Make-USHA/Havells/Orient/Cromptorn Equivalant.

Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.

Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.

Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. ( Tel junction Box)

Supplying & Commissioning of Telephone Hand Set.

Supplying & installation of 10 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.

Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.

Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

Supply of all materials, labour and construction of 11-KV overhead line from tapping point of CESU with 10.0 metre long 200mmx100mm Joist pole ( 200 ISMB) , 55-sqmm AAAC conductor complete with required insulators, cross arms, stays, struts, guarding complete as per site requirement and direction of Engineer-in-charge.

Supply, delivery, of energy efficient low loss 150-KVA, 11/0.415 KV Copper wound ONAN Dyn-11 transformer complete including first filling of transformer oil.

Supply, laying, installation, testing and commissioning of 3Core 95sqmm 11KV XLPE ( E) cable

Supply of material , installation, testing and commissioning of 3Core 95sqmm 11KV XLPE outdoor jointing kit

Supply, installation and testing of L.T. outdoor/ indoor floor mounted type distribution boards made out of 2mm thick CR sheet metal cubicle, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proved; having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. Panel having 300A 3P MCCB (50KA) -1 No as incomer with suitable arrangement for cable termination of complete duly factory wired as per SLD

Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 240 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable)

Supply of materials and end termination of following cables including supply of single compression brass cable glands, cable sockets etc complete as required and as per direction of Engineer-in-charge. 3.5C x 240 sq.mm

Construction of Man hole chamber for cable pulling / crossing of size [600mm(W) x 600mm(D)] complete including with suitable size of Hume pipe, base foundation with C.C 1:3:6, 250mm brick walls, filling the inside area with sand, removable RCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as required

Providing , laying and fixing of of 100mm dia PVC Pipe (8kg/psi) along with G.I /PVC accessories in ground for road crossing including trenching (450mm) and refilling as required.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.

Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required

Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.

Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required.

Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge. 8SWG HDBC Wire on surface or in recess for loop earthing as required.

8 swg G.I wire on surface or in recess for loop earthing as required.

Please Enable Macros to View BoQ information