SPECIAL REPAIRS TO ROOF TREATMENT IN CERTAIN OMQS AND OTM AND WINDOWS IN OFFICERS LIVING ACCN IN BLDG NO P14 AND P15 AT 4 AFSB VARANASI UNDER GE AF GORAKHPUR

Amount

Demolition of cement concrete un-reinforced as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including old roof treatment complete all as specified and as directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

M&L for cutting out cracks of roof in V-Section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for cutting grooves in brick walls, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in roof surface, surface finished even and fair, mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerb or mud stops, rounded or chamfered on edges surface finished even and smooth without using extra cement, mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for 10 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed. Make:- Dr Fixit Pidiproof LW+ or equivalent in specified make.

M&L for water proofing treatment to roof surface complete all as specified and directed with the followings:- (a) Applying bituminous based primer confirming to IS:3384-1965 @ 0.30 litre per sqm (b) Applying a tack coat of hot blown bitumen grade 85/25 confirming to IS:702 @ 1.20 Kg per sqm (c) Applying APP modified polymeric membrane of weight not less than 3.6Kg per sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (d) Blinding with coarse sand dry @ 0.50 to 1.00 Kg/sqmts dusted over bitumen and applying one coat of aluminium paint.

Disconnecting existing tank of capacity 500 litre to 1000 litre setting aside for repair cleaning and removing all scale and dirt etc from tank and refixing in position complete all as directed.

Taking up or down steel tubing and connections 20mm bore complete all as directed.

Taking up or down steel tubing and connections 25mm bore complete all as directed.

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

S&F 25mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 20mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 25mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

Taking down eaves gutter and rain water pipe any size and pattern including all fitting complete all as specified and directed.

S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

Fixing only 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends with access door any radius, for 110mm bore of pipe complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

All as per Item No. 21 above but exc 1.50 Sqm and n.exc 4 sqm each.

M&L for anodised aluminium powder coated (sliding type) windows/ventilator with frame and shutters (one frame with two nos sliding type shutter with glass and other frame with two nos sliding type shutter with wire mess) section of frame for top and side section 61.6x31.75x1.5mm thick and bearing bottom 61.6x31.75x1.50mm thick and shutter with side section of size 39.4x17.7x1.5mm, shutter interlocking 39.4x17.7x1.5mm, shutter top and bottom 39.4x17.7x1.5mm suaitable for moving over two track fixed over top of frame work or fixing with hinges including necessary aluminium jointng, cleats, glazing cleats, rubber packing anodised snap beading screws etc with 4 mm thick tinted glass in panels including all fittings & fixture for one frame (for two shutters) and other frame stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture1.4mm (for two shutter) complete all as specified and directed .

S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work conforming to Fe 290, grade E-165 complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for RCC 1:1½: 3 type A-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed.

S&F in repairs fancy type Vista pattern curtain rod 20mm bore required colour powder coated of approved shade complete all as specified and directed.

S&F in repairs fancy type for brackets for fixing of 20mm dia curtain rod complete al as specified and directed.

S&F in repairs fancy type knob golden/Silver colour suitable for 20mm dia curtain rod complete al as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coat of oil bound distemper and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

PANDEY TRADERS