REPAIRS TO VARIOUS MISC B/R AND E/M WORKS AT DAD COMPLEX UNDER GE NASIK ROAD.

Amount

Taking down MS window/ventilators frames with shutters of any size and any description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:work is to be executed for high rise bldgs.

Taking down carefully MS window shutters of any size and description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) frame for doors,windows,ventilators and glazed partition frame of any size with one or more rebates including joining cleat,beading,glazing clips and connected accessories as required for fixing etc.complete all as specified. Note.work is to be executed for high rise bldgs.

S&F aluminium (50 micron powder coated) door shutters,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handles 2 nos in each door shutter,hinges,anodised aluminium snap beading screws etc complete all as specified. Note.Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,sliding type without sash bars,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings. Note.Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,side hung without sash bars,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays/tower bolt 150mm long(1nos),hinges type B-21,100mm long(2Nos),suitable handle(2 Nos per shutter). Note.Work is to be executed for high rise bldgs.

S&F 4.0mm thick sheet glass,ordinary quality and glazing with silicon gel in square n. exc 0.5 sqm in each pane. Note.work is to be executed at any height and situation.

M&L for 3.0mm thick frosted sheet glass,ordinary quality and glazing with silicon gel in square n.exc 0.5sqm in each pane.

S&F 4.0 mm thick sheet glass,ordinary quality and glazing with silicon gel in square exc 0.5sqm in each pane. Note.Work is to be executed at any height and situation.

S&F Stainless steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture 1.00mm and fixed with stainless steel wire staples. Note. Work is to be executed at any height and situation.

Dismantling wrought iron or mild any description such as steel gate,steel frame works,purlins,rafter,railings,balusters and window guard bars and directed by engr-in-charge. Note.work is to be executed at any height and situation.

S&F framed work as in grill,doors or gates of angle or other section with gusset plates,braces,etc. complete,drilled for fixing of steel sheeting or other coverings,doors,etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed by engr-in-charge. Note.work is to be executed at any height and situation.

M&L for preparing new or untreated steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide. Note. Work is to be executed at any height and situation.

M&L for complete removal of existing treatment on Internal wall surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound(Premium quality as approved by GE) using gun. Note. work is to be executed at any height and situation.

M&L for complete removal of existing treatment on Internal ceiling surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound(Premium quality as approved by GE) using gun. Note. work is to be executed at any height and situation.

M&L for 1.0 mm thick acrylic wall care putty on wall surfaces as per manufacturers instruction.

M&L for 1.0 mm thick acrylic wall care putty on ceiling surfaces as per manufacturers instructions.

M&L for 0.50 mm thick acrylic wall care putty on wall surfaces as per manufacturers instructions.

M&L for 0.50 mm thick acrylic wall care putty on ceiling surfaces as per manufacturers instructions.

M&L for applying two coats of interior primer over wall surfaces as per manufacturers instruction.

M&L for applying two coats of interior primer over ceiling surfaces as per manufacturers instruction.

M&L for applying one coat of interior primer over wall surfaces as per manufacturers instruction.

M&L for applying one coat of interior primer over ceiling surfaces as per manufacturers instruction.

M&L for applying two coats of acylic distemper oil emulsion on wall surfaces.

M&L for applying two coats of acylic distemper oil emulsion on ceiling surfaces.

M&L for applying one coat of acylic distemper oil emulsion on wall surfaces.

M&L for applying one coat of acylic distemper oil emulsion on ceiling surfaces.

M&L for complete removal of existing treatment on external wall surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE)

M&L for complete removal of existing treatment on external Ceiling surfaces by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE)

M&L for applying two coats of exterior emulsion paint on wall surfaces.

M&L for applying two coats of exterior emulsion paint on ceiling surfaces.

M&L for applying one coat of exterior emulsion paint on wall surfaces.

M&L for applying one coat of exterior emulsion paint on Ceiling surfaces.

M&L for applying one coat of exterior primer on wall surfaces as per manufacturers instruction.

M&L for applying one coat of exterior primer on Ceiling surfaces as per manufacturers instruction.

M&L for applying two coats of exterior primer on wall surfaces as per manufacturers instruction.

M&L for applying two coats of exterior primer on ceiling surfaces as per manufacturers instruction.

Taking down completely cement or cement lime plaster,any description on brick or stone walls etc. including raking out joints,hacking for key,scrubing down with water etc. Note. Work to be executed at any height and situation.

M&L for rendering 15mm thick in cement mortar 1:4 on wall surfaces finished fair and even.

M&L for rendering 10mm thick in cement mortar 1:6 on wall surfaces finished fair and even.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished fair and even.

M&L for preparation of old painted wooden surfaces of any description,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint of tint as directed by engr-in-charge.

Demolition of brickwork or stone/boulder masonry,built in cement mortar or cement lime mortar including all quoins,arches,pillars etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6

M&L Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork ,sccaffolding etc. Note. work is to be executed at any height any situation.

M&L for plastering on walls in cement mortar 1:4 in patches not exc 3sqm on the building over and including taking down old plastering on walls,any description including finishing the surface including necessary sccaffolding etc. Note.work is to be executed at any height and situation.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) exc 1.5 sqm but n. exc 4 sqm each and making good the jambs,soffits of lintels etc. after fixing of new chowkhat or frame to match the existing surface. Note. Work is to be executed at any height and situation.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type modified flush door shutter with provision of fixing wiremesh of 0.56mm nominal dia of wire and average width of aperture 1.00mm (with provision of fixing mosquitto proofing in decorative fashion as directed by engr-in-charge) of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note.wire mesh door shutter shall be factory made.quoted rate deems to be inclusive of all additional cost for cutting door in size and shape,wastage and wiremesh beading etc.wiremesh shall not be paid separately.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners etc.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs,soffits of the lintels etc. After fixing of new chowkhat or frame to match the existing surface. Note.work is to be executed at any height and situation.

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each. Note. Work is to be executed at any height and situation.

Taking down shutters of any description exc 2 sqm each. Note. Work is to be executed at any height and situation.

M&L for 35mm thick second class hard wood,factory made,glazed and skelton shutters,open rebated and prepared to receive glass,gauge,etc(without sash bars),edges of framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass,etc,; sizes of members of shutters as specified in SSR Part-I,section 8,clause 8.24(a);supplied and fitted to chowkhats.

S&F factory made framed paneled shutters 35mm thick of 2nd class hard wood(any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial face veneers fixed to chowkhat. The size of rail and stile as per IS:1003(Part-I),Kiln seasoned and chemically pressure treated complete all as specified and directed.

Preparing new wood or wood based surface over 10cm width or girth and two coats of synthetic enamel paint over and including a coat of pink primer. Note.work is to be executed at any height and situation.

S&F 125mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B-21.

S&F 200mm size aluminium anodised,barrel tower bolts of extruded section and fixed.

S&F 300 mm size aluminium alloy,anodised,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed.

S&F extruded aluminium alloy handles,125mm size,fabricated type,anodised.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing),removing debris out of MOD land and rubbish off the premises.

M&L for 40mm thick cement concrete 1:2:4 type B0(using 12.5 mm graded aggregate) as in levelling course to flooring etc.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4.

M&L for 8-10mm thick double charged vitrified tile ,area of each tile not exceeding 0.36 Sqm as in flooring,laid in any shape/pattern over and including 15mm thick screed in CM 1:6 as in floors,jointed in neat cement slurry and pointed in white cement to match the shade of the tile.

M&L for 8-10 mm thick double charged vitrified tile as in skirting,laid in any shape/pattern over and including 10mm thick backing coat in CM 1:4 and pointed in white cement to match the shade of the tile.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth. After curing period, two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 3 days curing, testing shall be done by flooding for 24 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. Note.work is required to be executed on top priority basis.urgency factor and extra laobour cost shall be deemed to be included by contractor while quoting.Nothing extra shall be paid.

S&F in repairs Vitreous China water closet squatting pan, 'Orissa pattern' size 580 x 440 mm white,with intergral foot rests and P/S trap(excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 litres capacity PVC valveless,syphonic action type,flushing cistern.low level,white,with inlet,ball valve.float and handle including flush pipe and brackets complete all as specified and directed.

S&F in repairs Vitreous china Premium/1st quality wash down water closet wall hung EWC white/ivory/off white(closed pattern incl all necessary accessories like rag bolts/gel gasket,sheet cover,jet spray etc over and including flush pipe complete in all respect all as specified.

S&F in repairs Vitreous china wash basin white,flat back,size 550 x 400 mm,including cutting for and pining in ends of bracket or erecting stand,with and including 32mm waste fitting brass,chromium plated with long screwed shank and fly nut,flange end bedded in red lead cement,brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore,including necessary packing,union and cap and fixed in repairs.

M&L for PVC(SWR) floor trap (75 mm dia),plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store. Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 15mm bore in new or old position(wall,ceiling,floors,etc.) Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 20mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store. Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 20mm bore in new or old position(wall,ceiling,floors,etc.) Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 25mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

S&F in repairs 15mm bore bib taps,fancy type,cast copper alloy,chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repairs hand shower(health faucet) 1Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and 15mm bore fixed in repair.

S&F Brass CP mixer for mixing hot and cold water,screwed down for iron pipe 15mm bore and fixed in repairs.

S&F in repair 15mm bore fancy type pillar taps,cast copper alloy,with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts.screwed for iron pipe and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated(anlge type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank and cup(concealed type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm.

S and F 32mm bore low density polyethylene(LDPE) pipes of pressure rating 6kgf/sqcm including fittings.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joint,including fixing to steel pipe or union 15mm bore.

S&F in repars sink made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330 mmx 160mm. SS sink shall be manufactured from salem stainless steel grade A1S1305.

S&F in repairs Stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug,washers,waste pipe,cast iron cantilever brackets,connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm.SS sink shall be manufactured from salem stainless steel grade A1S1305.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite(telephonic black ) work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note.Granite shall be telephonic black only.In aluminium windows granite shall be used in jambs of windows,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over 10 mm thick cement screed base in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

Dismantling water tanks exc 250 ltr & n exc 500 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 500 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

Dismantling water tanks exc 500 ltr & n exc 1000 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 1000 ltr) tanks(cylindrical vertical with closed top and double layered) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

S&F ball valves,20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(minimum weight 210 gms) fixed in repairs(ISI marked).

M&L for fixing in repairs 25 mm bore matt finish stainless steel(SS-304 grade) curtain rod weighing 0.275gm/m ,best quality as approved by Engr-in-charge over and including suitable projecting type brackets,end finals,socket for dead ends of pipe as the case may be complete all as specified and directed.

Taking down carefully existing bituminious membrane/tarfelt treatment of any description and cleaning and making good minor damaged surfaces of roof,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge wherever directed by engr-in-charge and removing rubbish out of defence land.

Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided for and removing rubbish out of defence land.

M&L for plain cement concrete 1:2:4 type B-0( using 12.5 mm graded aggregate) in roof kerbs or mud stops,ridge,padding,rounded or chamfered on edges.

M&L for rendering 15 mm thick(minimum) in CM 1:4 with liquid waterproofing compound(200ml per bag of cement used) on roof surfaces,parapets,facias etc. Note. Waterproofing compound shall be measured and paid separately.quoted rate also include for hacking over roof,parapet,facia surfaces for proper bonding of plaster/PCC.

Supply only liquid water proofing compound ISI marked complete all as specified and as directed.

M&L for applying evenly a coat of hot blown bitumen grade 85/25 over roof,facia,parapet surfaces at the rate 1.20kg per sqm for fixing app membrane etc including cleaning of surfaces.

M&L for waterproofing on roof including flashing and junctions of parapet,kerb,wall etc as undere-: (a) Laying a layer of APP based polymeric membrane,3mm thick(minimum),weighing not less than 3.60kg/sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160gms/sqm) shall be applied over compatible primer(oil based) at 0.40 litre/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160cps or cold sticker,application of APP modified membrane shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100mm on the longitudinal direction. (b) APP membrane,Primer and bitumastic aluminium paint shall be of same brand. (c) For vertical surfaces of parapet,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant(full width/depth of groove) i.e. "Dowsil 789 weatherproof silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately.

M&L for applying solar reflective bitumastic aluminium paint at the rate 0.15Kg per sqm per two coats over exposed app membrane surfaces(old/new) including cleaning of surfaces to the entire satisfaction of ground executives.

Disconnecting existing tanks exc 250 n exc 500 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note. Work is to be execute at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000 Ltrs,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note. Work is to be execute at any height and situation.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc. Note.work is to be executed at any height and situation.

S&F PVC(SWR) pipes 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls as RWP over and including fixing clamps,bends,Tee etc. Note.work to be executed at any height and situation.

S&F PVC(SWR) pipes 75 mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls including all bends,Tee,PVC fixing clamps etc. Note.work to be executed at any height and situation.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness,including cover fillets,frame etc.

M&L for 18-20mm thick both side prelaminated(decorative type) solid wpc board as in kitchen cabinets,partition etc over and including suitable butt hinges of ss,magnetic catcher,beading,ball bearing runners 450mm telescopic channel etc complete all as specified and directed to make the shutters/partition/drawers fully functional.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30(single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided.

M&L for Cement concrete 1:4:8 type D-2(using 40 mm graded aggregate only) as in foundation,filling and mass concrete.

M&L for rough shahabad stone 25mm to 30mm thick in flooring/plinth over and including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in CM 1:4 complete all as specified and directed.

Supply and fix in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm ,duly assembled and fixed to wall with wall screws/fasterners all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs plastic seat cover white closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture 1.00mm and fixed with stainless steel wire staples or wooden beading complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down and hanging up during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

M&L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified for One light point controlled by one, one way switch. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

All as per same in item No. 135.00 above but One ceiling /exhaust fan point controlled by one switch and regulator

All as per same in item No. 135.00 above but One 3 pin 5 amp socket out point on the same board with other switches.

All as per same in item No. 135.00 above but One3 pin 5 amps socket out let point on independent board

All as per same in item No. 135.00 above but One bell/buzzer point controlled by one bell push.

All as per same in item No. 135.00 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S&F Switch piano flush type single pole one way 5 amps.

S&F Socket outlet 2 in 1, 3 pin, 6A

S&F Switch socket combination 2 in 1, 6A flush type

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S&F Buzzer, Ding Dong AC. 230 volts, single pole

S&F Bell push, flush type, 5 amp.

S&F Electronic regulator 100/120 Watt step type

S&F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.

S&F in repair decorative gate/garden light made up of high grade unbreakable polycarbonate material suitable for LED lamp upto 20W B22 base including connecting up with twin core twisted flexible copper conductor cable, 10 LED lamp, foundation and housing PVC pipe etc complete all as specified and directed.

S&F in repair SP&N enclosure with 2 pole and earth metal plug & socket for incorporating 10 A / 20 A SPN / DP MCB complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in repair 20 Watt LED Tube Light (4 feet) (Double Side Connection) Ultra bright glass with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders or lamp holders as required in site. Complete all as specified and directed.

S&F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

Fabrication,supply & fixing of GI pipe bracket up to 25 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting

Taking down and fixing partly unserviceable LED downlighter/security light fitting (building) of any make and type for necessary repair including ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder to be provided by contractor. (2) Spare i.e driver shall be measured seperately.

S&F in repair electronic driver 6/9/12/15 Watt suitable for downlighter/security light fittings new generation energy saving and environmental friendly long life LED downlighter/street light/building security light of any make and type, all as specified and directed by Engr-in-Charge.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.

S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.

S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.

Taking down and fixing partly unserviceable surface/recess mounted LED fittings of any make and size for necessary repair including ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder to be provided by contractor. (2) Spare i.e driver shall be measured seperately.

S&F in repair electronic driver upto 42W Watt suitable for surface/recess mounted LED fittings of any make and type, all as specified and directed by Engr-in-Charge.

Taking down/dismantling/handing of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape,Rotter soft etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, including spare parts, painting and necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including supply and fixing the following items ( Split pin - 02 Nos, Connection block - 1 No and Insulation rubber bush. - 01 No, Condensor-01 No, bearing- 01 or 02 Nos, gun metal bush-01 No if required) and including necessary transportion to workshop, for 1200/1400MM sweeps of ceiing fan .

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking out of centrifugal pump set from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/ overhauling incluiding cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and installing back including helium gasket sheet not less then 1mm thick & to the entire satisfaction of engr-in -charge all as specified and directed. Make -Kirloskar, DSM -65-32A (Note:- Spares as required shall be measure & paid seperately against the relevant items).

Supply only Casing Wear Ring.

Supply only shaft sleeve.

Supply only Inter Stage Ring

Supply only Ball bearing DE SKF

Supply only Ball bearing NDE SKF

Supply only Bearing cartridge DE

Supply only Bearing cartridge NDE

Supply only Split Gland bush

Taking up or down 25 mm dia GI Tubing and connections including cleaning for refixing or removal to store.

All as per same in item No. 186.00 above but 40 mm dia

Supply and laying 40mm GI tubing medium grade with all fittings and fixed complete laid in trenches.

All as per same in item No. 188.00 above but 25 mm

All as per same in item No. 188.00 above but 20 mm

Removing Unserviceable Gate valve/stop valve of water supply lines, closing the opening with plug or preparing for new as required necessary fitting complete and deposited to E/M store yard of 20 mm dia.

All as per same in item No. 191.00 above but 25 mm dia

All as per same in item No. 191.00 above but 40 mm dia

S&F Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size 40 mm dia.

All as per same in item No. 194.00 above but 25 mm

All as per same in item No. 194.00 above but 20 mm

Taking up cast iron water mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of size 150MM.

Supply and laying cast iron pipes with spigot and socket ends, tyton ring, centrifugally cast, Class LA, in any length laid in trenches of size 150MM

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia.

M&L for run lead joints complete for water mains with spigot & socket pipes and fittings, all as specified and directed. 150 mm Bore of pipe

S&F in repair CI sluic valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of sizes 150 mm dia

Disconnecting electrically and disengaging the Monoblock pump set 3 phase 415 Vlots, 50 Cycles, 3 HP, 1440 RPM capacity , removing from foundations, overhauling thoroughly including complete varnishing and reinsulation replacement of DE /NDE bearings ,greasing, reassembling the monoblock pump set, mounting on the foundations, testing and commissioning all as directed. (Note- Rewinding will be measure & paid seperately under relavant item of sch.)

Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Vlots, 50 Cycles,and taking out to local workshop submersible induction motor 30 HP for repair purpose including complete cleaning,varnishing ,insulation, replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. (Note- Rewinding will be measure & paid seperately under relavant item of sch.)

M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr -in - charge

Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 95 Sqmm 3.5 Core size including taking down:-

Supply laying & testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm including taking down.

S&F in repair GI water tubing 100mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenchescomplete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair MCCB of 200A, 4 pole, 50 KA,

S&F in repair cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of 95 Sqmm,

S&F in repair Cable jointing kit for 1100V (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 95 Sqmm,

Repair / Servicing / Overhauling to carry out maintenanace of diesel engine driving generating set of capacity 250 KVA (Crompton Greaves). checking throughly the generator and finding out its faulty/defective parts and complete servicing /replacing defective spares of the DG set including provn of engine oil of apropriate grade, FIP Calibration, FIP Overhaul, Injector Calibration & Pressure Testing, injector overhaul, cylinder head repair & valve lapping, connecting rod bend Check & bush Setting, crank shaft grinding, crank case machining & bore checking, stator servicing, rotor servicing, radiator repair & servicing, air cleaner element repair & servicing, hose repair/new hose, makeup water line, pipe (thermostat to radiator inlet), hose: air cleaner, air cleaner element, clip for breather pipe, air pipe (CAC to inlet), lube oil inlet pipe, lube oil drain pipe, pipe: thermostat to radiator, pipe: radiator to pump inlet, fuel pipe: fuel filter to FIP, fuel pipe feed pump to fuel filter, hose for air cleaner, battery cable assembly of suitable size, upper and lower clamp for pipe, V belt, fuel pipe, high pressure pipe assembly, drain pipe for lub oil sump, hose for breather, setting bush, bush for injector, valve stem seal, rubber bush, steel bush, piston ring set, valve guide etc (if required) and labour for replacement of defective spares as required to make the DG set functional in all respect. After Repair/Servicing /Overhauling of the DG Set testing will be carried out upto the entire satisfaction of Engr-in-charge. Spare partes i.e oil filter, diesel filter, air filter will be measured and paid seperately.

Supply only Oil filter assembly complete, all as specified and directed by Engr-in-Charge of capacity 250 KVA.

Supply only diesel filter assembly complete, all as specified and directed by Engr-in-Charge of capacity 250 KVA.

Supply only air filter assembly complete, all as specified and directed by Engr-in-Charge of capacity 250 KVA. Note :- Supply only items fixing shall be deemed to be rates in Item No. 213.00 above.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 88,752.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI (BID ID -3147925)

Abhiraj Enterprises (BID ID -3143627)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3142798)

UNITED ENTERPRISES (BID ID -3150837)

Bidder Name

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

UNITED ENTERPRISES

Abhiraj Enterprises

MANOVANDANA CONSTRUCTION