SPECIAL REPAIR TO 08 X OFFRS TOILET IN BLDG NO P 140 AND PROVN OF CERTAIN REVENUE AND MINOR WORKS UNDER GE 865 EWS AT LEH

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing ) rubbish off the premisescomplete all as specified and directed by engr-in-Charge complete all as specified and diected by Engr-in-Charge

Material & Labour 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring and finished surface as in received tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 to 8 mm or 300X600/10mm or 450x300x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.11 and n exc 0.18sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments and 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.

M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 and n exc 0.11 Sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments and 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed by Engr-in-Charge.

M&L for GI powder coated micro preforated micro look false ceiling with fleece lay-in-type, 0.50mm thick, suitable for grid/frame module of 600mm x 600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm celing etc complete all as per specified and directed by Engr-in-Charge.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames complete all as specified and directed by Engr-in-Charge.

M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63 mm single rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed by Engr-in-Charge.

Providing and fixing 28 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum should be 100% lead free door complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed by Engr-in-Charge.

S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed by Engr-in-Charge.

S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed by Engr-in-Charge.

S&F Brass handles 150 mm long polished bright with brass screws complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement including taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in cm 1:6 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement incl mixing of wpc including taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or old plastered wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resistance primer and applying two coats of plastic emulsion first quality of approved colour complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or old plastered wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resistance primer and applying two coats of exterior emulsion first quality of approved colour complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of primer including complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.

M&L for one coat of synthetic enamelled paint on old decorated wooden surfaces including preperation complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20mm bore including cleaning for refixing or removal to store. complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified and directed by Engr-in-charge.

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed by Engr-in-Charge.

S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified by Engr-in-Charge.

S&f 75mm bore PVC (SWR) pipe bends any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 110mm bore bends any radius, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

M&L 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified

S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC complete all as specified and directed by Engr-in-Charge.

S&F single piece china wash down water closet , Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Conversion Bend, Fixing Accessories And Accessories Set, Size: 380x645x805mm, S Trap-250mm Make: Jaquar Cat No. OPS-WHT-15753NS250UFSMZ or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F wash hand basin table top type Thin Rim Table Top Basin, Shape - Round, fixed on granite top grooving and cutting if required in size of Size: 455x455x110 mm Make: Jaquar cat No JDS-WHT-25939 or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F single lever Basin mixer without popup waste system with 450mm long braided hoses Make Jaquar Cat No. VGP-81011B or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F hand shower ( health faucet ) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook etc (Make : Jaquar Cat No. ALD-573) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F chromium plated toilet Roll holder fixed on walls etc (Make: Jaquar Cat No: CAN-1151N) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F angle valve with wall flange 15 mm bore cast copper alloy fancy type, chromium plated with cup etc (Make: Jaquar Cat No: VGP-81053) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore etc (Make: Jaquar Cat No:VGB-81037) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F towel rack 600 mm long with lower hanger, stainless steel fixed to walls with screws and fisher etc (Make: Jaquar Cat No. CAN-11818) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F CP brass towel ring fixed with and incl CP brass screws etc (Make: Jaquar Cat No: CAN-1121BN) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F Soap dish fixed with and incl CP brass screws etc (Make: Jaquar Cat No: ACN-1131N) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F Soap dispensor fixed with and incl CP brass screws etc (Make: Jaquar (Kubix) Cat No: CAN-1135N) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F chromium plated brass 32 mm click clake waste coupling for table top wash hand basin half or full thread fixed etc (Make: Jaquar Cat No. ALD-729L130) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F 32 mm bore brass chromium plated bottle traps for wash basins, sinks, urinals etc with inlet and outlet screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed by Engr-in-Charge.

S&F PVC connections 15mm size with CP nuts of length 600mm (Make: Jaquar Cat No. ALD-8058) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F Urinal with in sensor unit in size of480x300x740mm fixed to wall incl CP brass inclidng urinal partition, coupling and waste pipe and screws etc (Make: Jaquar Cat No: URS-WHT-13255, sensor unit Cat No. URS-WHT-13255) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F Rectangular shaped urinal partition with frosted Glass: 8mm thick in size of 900x 450 mm etc (make Jaquar Cat No-JSE-CHR-810US450X) or equivalent in Cera/Hindware complete all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in modular kitchen cabinets/cupboards/cubicals/sheleves/ partitions or as directed etc including lipping portion shall be of match with same colour, fixed with fastneres/SS angles 25 mm long where required for support/screws/complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick rubby pink or Rubby red granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite complete all as specifeid and directed by Engr-in-Charge.

Grinding and polishing on new or existing granite surface of floor and wall including cleaning complete all as specified and directed.

S&F MS bright polished auto hinges suitable for cupboard/cabinet fixed with screws as per manufacture instructions complete all as specified and directed by Engr-in-Charge.

S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 125 mm with waste hole of PTMT complete all as specifeid and directed by Engr-in-Charge.

Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete block masonary type C-1, (using 20mm graded crushed stone aggregate), set and jointed in cement martar 1:6 complete all as specifeid and directed by Engr-in-Charge.

S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations complete all as specified and directed by Engr-in-Charge.

S&F 20 in repairs PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completely as specified for the size 25mm bore, complete all as specified and directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section complete all as specified and directed by Engr-in-Charge.

M&L for 6 mm thick one side prelaminated solid core, grade 1(with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work ceiling or beam surfaces circular or flat as per direction including scantling where ever required etc complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed by Engr-in-Charge. Make as per PS.

M&L for wooden floor tiles of teak wood laminated finish 10mm thick with dove tailed joints laid over 150 micron polythene film and 3mm thick foam as per manufacturer's instrucions and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-Charge. Make and shade of tiles as approved by GE.

M&L for one coat of oil bound distamper on old decorated surfaces of walls incl preperation complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc1.5 m in depth and getting out hard/dense soil,complete all as specified and directed by Engr-in-Charge.

Excavation over areas, n exc 1.5 m deep and getting out in hard dense oil not exc 1.50 mtr depth complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.

Removing excavated material exc 500 mtr and n exc. 1.5 Km and depositing where directed at a level n exc. 1.5 m above the starting point., complete all as specified and directed by Engr-in-Charge.

M&L for walling of random rubble uncoursed well bonded built in CM 1:4 in retaining walls , abutment , or similar works etc, complete all as specified and directed by Engr-in-Charge.

M & L for providing PCC 1:4:8, type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L For PCC type B1 (1:2:4) (using 20 mm graded cushed stone aggregate) as in coping,Bond stone ,benching and the like incl form work, complete all as specified and directed by Engr-in-Charge.

M&L for hard core of broken stone boulders of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for filling behind the weep holes complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing to random rubble stone masonary uncoursed or brought upto course in CM 1:4, complete all as specified and directed by Engr-in-Charge.

M & L for Gypsum board false ceiling tile 7-8 mm thick with PVC film on the face side and other side metalised polyster flim as in ceilings placed on GI ceiling suspension system powder coated snap grid frame work of size 605 x 605 mm channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

Excavating in post holes hard/dense soil (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed by engr-in-Charge.

S & F Rolled, Tubular sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.and similer work conforming to Fe-290 Gde E-165 .complete all as specified and directed by Engr-in-Charge.

M & L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scr-ews as spfd, complete all as specified and directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer with modrant solution complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm thick galvanised mild steel sheets with two corrugation side lap fixed with J or L hooks with grade of zink coating 275 complete all as specified and directed by Engr-in-Charge.

S&F IInd class soft wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F only 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and directed by Engr-in-Charge.

S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F aluminum door handle cast type 150 mm in old or new position complete all as specified and directed by Engr-in-Charge.

S&F 100mm long mild steel medium weight but hinges cold rolled complete all as specified and directed by Engr-in-Charge.

S&F Viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate complete all as specified and directed by Engr-in-Charge.

S&F in repairs viterous China wash down water closet pan (pedestal pattern white) (excluding flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs for viterous china wash hand basin flat back size 550x400mm excluding traps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20mm bore bib taps fancy type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair pillar taps 20 mm bore of cast copper alloy chromimum plated screwed down high pressure, hot aor cold long screwed shank fly nuts screwed to PP-R Pipesof any description complete all as specified and directed by Engr-in-Charge

Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs (fixed in repair),complete all as specified and directed by Engr-in-Charge.

S&F in repairs Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed by Engr-in-Charge

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in-Charge

S&F Kitchen plate rack made of stainless steel 0.80mm thick sheet, standard size 900x900x250mm and design as approved by GE and fixed to wall with wooden plug and screw, (fixed in repair), complete all as specified and directed by Engr-in-charge.

S&F of wooden panelling on vertical surface of wall using following specifications complete all as specified and directed:- (a) S&F Iind class hard wood wooden gutties of size 25mmx25mmx200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S&F horizontal runner Iind class soft wood(Kali( at 120 c/c of sectional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment. (c) S&F 1st cl soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners. Polishing for the following steps:- (i) Surface Preparation : All wood surface shall be must be clean, firm and dry, remove any oil, grease, mortar dropping etc sand in the direction of grain to a smooth finish with 150 flowed by 220 grit paper and remove dust with a damp cloth. (ii) Filler : Use a coat oil based wood filler allow to dry for 24 Hrs and remove the excess using 220 grit emery paper and wipe with dry cloth. (iii) Stain the wood : Adding stain to bare or stripped wood can change the colour and highlight the grain pattern of any interior wood. Apply wood stain by rubbing or brushing against the direction of the grain will be help fill deep pores with stain. Apply a libral amount of stain giving up the wood an ample amount to absorb. allow to dry 30 to 60 mints. (iv) Apply touch wood polish several coats until the required finish is achieved allowing 15-20 minute between coats. (d) S&F 1st class soft wood (Deodar) decorative breading 40mm wide on top surface of wall panelling including two coats of varnish.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc complete all as speciifed and directed by Engr-in-Charge

M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 103.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No 103.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

M&L for point wiring for 3 pin 15 Amps socket outlet independent with FRLS copper conductor cable PVC insulated multistandard 2.5 sqmm with 1.5 Sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing caping with sunk cast iron complete all as specified and directed by Engr-in-Charge.

S&F in replacement for switch socket outlet, 3 pin 5 Amps piano flush type single pole ISI marked complete all as specified and directed by Engr-inCharge.

S&F in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engr-in-Charge.

S&F in replacement of switch socket outlet 2 in 1, 3 pin, 5 and 15 Amps piano flush type single pole ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in replacement of switch piano flush type single pole one way 5 Amps ISI marked complete all as specified and directed by Engr-in-Charge.

S&F in replacement of ceiling rose surface backlite two or three terminal complete all as specified and directed by Engr-in-charge.

S&F surface/wall mounted LED fittings with LED tube 18 watts, 6000K capacity decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficent 4 feet long type bracket including necessary connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings MAke : HAvells Cat No. LHEXBLP7PN1W018, or equivalent in Bajaj/Philips/Wipro complete all as specified and directed by Engr-in-Charge.

All as per item No 112 here-in-above but 09 watts including necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose /PVC connector to light fittings complete all as specified and directed by Engr-in-Charge

S&F of LED 36 watt recessed 2x2 luminaire (warm/white) to enhance the delight of occupants with comportable experience through its design and glare free soft illumination and connection of 3 core coppper wire with all acessessories complete all as specified and directed by Engr-in-Charge.

S&F of Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 mm of make Havells or equivalent in Bajaj/Crompton Greaves complete all as specified and directed by Engr-in-Charge.

S&F of Occupancy slim PIR room presence sensor ceiling mount 360 degree angle 230 volts energy saving motion sensor incl necessary connections etc complete Make Schneider Cat No. CSS54E-WE or equivalent in Legrand/ABB complete all as specified and drected by Engr-in-Charge.

S&F sheet metal enclousure SPN DBs with 200 Amps rated bus bar of 4 way 240 volts with blank plate complete with double door complete all as specified and directed by Engr-in-Charge.

S&F for MCB SPN 32 Amps 'C' series complete all as speciied and directed by Engr-in-Charge

S&F for MCB SP 5-32 Amps 'C' series complete all as speciied and directed by Engr-in-Charge

S&F Sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x6 Sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F of MCB DB TPN 4 way double door 415 Volt 50 Hz with complete all as specified and directed by Engr-in-Charge

S&F MCB DB SPN Regal gray 8 way double door 240 Volt 50 Hz with complete all as speicified and drected by Engr-in-Charge.

S&F MCB TPN 63 Amps, 'C' series complete all specified and directed by Engr-in-Charge

S&F Sub main wiring with four run of 16 Sqmm (4x 16 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with two run of 16 Sqmm (2x 16 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 4 runs of 16 Sqmm (4 x 16 Sqmm), two run of 16 Sqmm (2 x 16 Sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

M&L for lamp holder, PVC/polycarbonate type with black platesuitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F LED lamp 07 watt 230 V, complete all as specified and directed by Engr-in-Charge

S&F Sub main wiring with two run of 4 Sqmm (2x 4 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 4 Sqmm (1x 4 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2x 4 Sqmm), one run of 4 Sqmm (1x 4 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

M/S SHAMSHER ALI SUFI

SHUBHAM ENGINEERS & BUILDERS