Interior, Renovation, Furnishing and Internal Electrification work in State IT Centre at MPSEDC, Arera Hills Bhopal

Amount

Providing and Fixing of 12mm Thick toughened plain glass with film on Entrance gate and others doors partly fixed partly open able with necessary 'OZONE' Patch fittings like : Floor Spring FS – 8400,Bottom Door OPF – 3,Door Top OPF – 2,Pivit OPF – 1,Handle OGH - 77,Connector OGC – 44,Lock for Door OPL - 1, which ever is required as per drawing and direction of Engineer in charge including scaffolding, T & P and labour etc. complete in all respect.

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC)

Providing and applying vinyl coated wall paer of approved brand and finish as per the architects specification including scaffolding cleaning etc., at all levels and location etc, complete as directed and approved by architect. Basic rate of wall paper 600/- per SqMt.

ARTIFICIAL PLANTS Providing and fixing artificial plants of Exotic flora pvt ltd/approved make. 3' - 4' Palm 500 leaves

ARTIFICIAL PLANTS Providing and fixing artificial plants of Exotic flora pvt ltd/approved make. 3' - 4' Bush type

Supplying, and erecting in position S.S. dust bins with lid fabricated from S.S.sheet 204 grade

Decor Cutworks MDF Raw Cutworks finished with deco paint as per approved shade Precision cutting with CNC Plasma or Fiber Laser Cutter Machine

Designer Book Rack 300mm Deep Base Structure Raw MDF in prescion cut CNC shapes to be finsihed with Deco paint

Single Side work Station Main Unit:- Overall Dimention:- 1000X600x750 mm Ht. Top made up of 25 mm thick prelaminated particle board. Edge beading of edges by Through Feed Machine. Newly designed Quadra Leg of Size :- 725 mm Ht. with Laveller for enhance the beauty of the work space. Made up of combination of 0.6 to 1.6 mm thick high quality MS Cold Rolled Closed Annealed sheet. Having middle support of 40x40X1.2 mm thick MS CRCA Pipes. Horizontal cable tray made up of 0.8 mm cold rolled close annealed sheet curved with bottom & side pillar. Having painted glass partition 12 mm thick for separation in the mid section. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

Single Side work Station Ad-on Unit :- Overall Dimention:- 1000X600x750 mm Ht. Top made up of 25 mm thick prelaminated particle board. Edge beading of edges by Through Feed Machine. Newly designed Quadra Leg of Size :- 725 mm Ht. with Laveller for enhance the beauty of the work space. Made up of combination of 0.6 to 1.6 mm thick high quality MS Cold Rolled Closed Annealed sheet. Having middle support of 40x40X1.2 mm thick MS CRCA Pipes. Horizontal cable tray made up of 0.8 mm cold rolled close annealed sheet curved with bottom & side pillar. Having painted glass partition 12 mm thick for separation in the mid section. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

Both Side work Station Main Unit :-Overall Dimention:- 2000X1200x750 mm Ht. Top made up of 25 mm thick prelaminated particle board. Edge beading of edges by Through Feed Machine. Newly designed Quadra Leg of Size :- 725 mm Ht. with Laveller for enhance the beauty of the work space. Made up of combination of 0.6 to 1.6 mm thick high quality MS Cold Rolled Closed Annealed sheet. Having middle support of 40x40X1.2 mm thick MS CRCA Pipes. Horizontal cable tray made up of 0.8 mm cold rolled close annealed sheet curved with bottom & side pillar. Having painted glass partition 12 mm thick for separation in the mid section. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

Both Side work Station Ad-on Unit :-Overall Dimention:- 2000X1200x750 mm Ht. Top made up of 25 mm thick prelaminated particle board. Edge beading of edges by Through Feed Machine. Newly designed Quadra Leg of Size :- 725 mm Ht. with Laveller for enhance the beauty of the work space. Made up of combination of 0.6 to 1.6 mm thick high quality MS Cold Rolled Closed Annealed sheet. Having middle support of 40x40X1.2 mm thick MS CRCA Pipes. Horizontal cable tray made up of 0.8 mm cold rolled close annealed sheet curved with bottom & side pillar. Having painted glass partition 12 mm thick for separation in the mid section. All steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface.

Hi-Back Chair- Specification- Size-H:1130-1230mm, Seat ht: 470-570mm, D-680mm, W-600 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes PP arm rest adjustable with PP pad. Quality tapestry. High density Moulded PU cushion of standard approved make.

Low Back Chair- Specification- Size-H:930-1030mm, Seat ht: 460-560mm, D-680mm, W-580 mm. 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening with PP cover. Back is moulded Bright Bar with stitched Mesh Cloth. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable synchrony tilt mechanism and with Single piece Die castes Fixed PP arm rest . Quality tapestry. High density Moulded PU cushion of standard approved make.

Table with side runner with drawer pedestal :- Executive Table-102- Overall table size : W 1800mm x D 900mm x H 750mm, Top made of 36mm thick BSL particle board and short sides duly seated with PVC edge beading of 2mm thickness. Base made of 36mm thick BSL particle board with levellers. Top supporting rail of 25mm thick BSL particle board. side runner of size W 900mm x D 400mm x H 634mm. made of 18mm thick BSL Particle board and top 36mm BSL particle board. Side runner shall have one cupboard. pedestal with three drawer shall be provided of 450mm width.

Side Runner-Sliding Door Unit (SDU) with drawer :-Size: Height:750mm, Width:900mm, Depth:400mm. Body part made-up of prime quality Prelaminated Particle Board. Under structure made up of 18mm thick Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles. Doors & Drawer are of PLP Board. Doors are Top hung slide on roller bearing.

Low Back Chair- Overall Size - Max/Min. Height-1165/1045mm, Width-690mm, Depth - 700mm, Seat Height-640/520mm, Seat Size-W-560mm x D-530mm, Back Size-H-640mm x W-530mm, 5-Prong nylon base for stability. Twin Wheel heavy Duty Castor for easy mobility under load. Hot pressed ply wood with steel T-Nuts for rigid fastening. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable centre tilt mechanism and with Single piece die castes Nylon arm rest with Cushion. Quality Latherite tapestry with Single and double stitch. High density PU cushion. Available in only Black Latherite.

Sofa Two Seater :- Providing and placement of 2 seater sofa with Overall Size 1350mm(W) 770mm(D) 730(H). Seat Ht 450mm. Handle Ht- 620mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free) & 3 mm. Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Super Soft 45 mm. 22mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm.

Sofa Three Seater :- Providing and placement of 3 seater sofa with Overall Size 2025mm(W) 770mm(D) 730(H). Seat Ht 450mm. Handle Ht- 620mm. Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free) & 3 mm. Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thick U foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 45mm thick U foam, Density : 28. Super Soft 45 mm. 22mm thick U foam, Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8 mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 150mm.

1 Manager and 10 Employee seating:- 10 Seater Work Station Top 25mm Thick Prelaminated Particle Board with 70mm Thick Tiles Base Partition- Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Glass, Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium.

Mobile Pedestal unit PLPB ( Pre-laminated Particle Board)- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality make front mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides.

Sliding Door Unit (SDU)-1200mm with openable door- Size: Height:1200mm,Width:900mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board. Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine.

Reception Desk with Pedestal :- Providing and fixing of reception table of size L 2700Xh1000/750xw600mm. Made of mr grade 18.0mm thick ply of archid/green lam company. The finish will be of 3.0mm thick LG company corian sheet. Inside will be of drawers. The total work to be done as per drawing and direction of engineer in charge.

Supply, installation, testing and commissioning of 150 x 25 x 1.2 G.I. floor raceway including all required accessories i/c fasteners, thread rods, junction box crossover junction box etc. as required. 150 x 25 x 1.2 mm

Supplying, installation and testing of 36 watt suspended type LED Profile Track Light including all required accessories. Make : Jaquar/Hybec/Wipro

Supplying, installation and testing of magnetic Track Lights as required in existing Track Strips. Make : Jaquar/Hybec/Wipro

Supplying and installation of Magnetic Track Strip for Track Lights in any shape size or direction including all accessories complete. Make : Jaquar/Hybec/Wipro

Providing & Fixing of 24-Port managed layer 2 Data Switch of (Giga Switch (10/100/1000) Make: D-link/Cisco/Netgear Note:- The Bidder Shall quote his own rates for item rates 1 to 28

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)