Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.7 LAccepted-AOC | 1 | Accepted-AOC LOWEST BID | |
| 2 | 2₹43.8 L+₹1,321.37 (0.03%)Rejected-Finance | 2 | Rejected-Finance REJECT | |
| 3 | 3₹45.4 L+₹1.6 L (3.70%)Rejected-Finance | 3 | Rejected-Finance REJECT | |
| 4 | 4₹45.4 L+₹1.7 L (3.79%)Rejected-Finance | 4 | Rejected-Finance REJECT |
Tender Value
₹42.6 L
EMD Value
₹85,105
Closing Date
25 Jul 2023, 10:00 amClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER KANDI AREA DAM MTC. DIVN. NO.2 HOSHIARPUR
Estimate for Restoration of damaged/chocked pipeline along with allied work of distribution system of Januari Dam in district Hoshiarpur.
2023_WR_105707_1
14
Open Tender
Civil Works
Item Rate
170 days
JANAURI DAM HOSHIARPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Yes
₹85,105
Yes
17 Aug 2023
14 Jul 2023
25 Jul 2023
14 Jul 2023
25 Jul 2023
14 Jul 2023
Amount
Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/inside the town involving lead upto 15 meter. Complete in all respect as per Design,Drawings and Instructions of Engineer-in-Charge
Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. Complete in all respect as per Design,Drawings and Instructions of Engineer-in-Charge.
Providing, Laying, fixing & jointing of u.P.V.C. Sockted Pipes (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing. Complete in all respect as per Specifications,Drawings and Instructions of Engineer-in-Charge.
110mm dia. pipe of 2.5 Kgf. /sqcm
125mm dia. pipe of 2.5 Kgf. /sqcm
140mm dia. pipe of 2.5 Kgf. /sqcm
160mm dia. pipe of 2.5 Kgf. /sqcm
225 mm dia. pipe of 2.5 Kgf. /sqcm
280 mm dia. pipe of 2.5 Kgf. /sqcm
315 mm dia. pipe of 2.5 Kgf. /sqcm
400 mm dia. pipe of 2.5 Kgf. /sqcm
Supplying and Fixing uPVC Riser for Release of Water at different outlet. Complete in all respect as per Design, P.W.D Specifications and Instructions of Engineer-in-charge.
110mm dia. pipe of 2.5 Kgf. /sqcm
125mm dia. pipe of 2.5 Kgf. /sqcm
140mm dia. pipe of 2.5 Kgf. /sqcm
160mm dia. pipe of 2.5 Kgf. /sqcm
225mm dia. pipe of 2.5 Kgf. /sqcm
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per ISI. Complete in all respect as per Specifications,Drawings and Instructions of Engineer-in-Charge.
110 mm Dia. Sluice Valve Flanged
125 mm Dia. Sluice Valve Flanged
140 mm Dia. Sluice Valve Flanged
160 mm Dia. Sluice Valve Flanged
225 mm Dia. Sluice Valve Flanged
Providing & fixing Single Air Valve ISI Marked as per IS-14845 including jointing,cost of nut bolts & rubber insertion all carriages (d) C.I Single air valve Screwed (50mm). complete in all respect as per Design,Drawings and Instructions of Engineer-in-Charge.
Providing & fixing ISI Marked Alfa Valves. Complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
110 mm Dia. Alfa Valve
125 mm Dia. Alfa Valve
140 mm Dia. Alfa Valve
160 mm Dia. Alfa Valve
Cement concrete 1:4:8 with stone Aggregate 40mm gauge, mixing by mechanical means using concrete mixer volumetric type. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
Cement concrete 1:2:4 With stone ballast or shingle, mixing by mechanical means using concrete mixer volumetric type. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
Cement plaster 1:4 (12.50mm) thick. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
Dismantling Brick work tile, masonry or tile lining, (In cement). Complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
Dismantling Concrete, (b) Cement Concrete plain 1:4:8. Complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
Dismantling Concrete, (d) Cement Concrete plain 1:2:4. Complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
Supplying and Fixing uPVC Equal Tee of 4kgf/cm2 Pressure confirming to relevant IS Codes with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
Supplying and Fixing uPVC Reducer of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
Supplying and Fixing uPVC 90 Degree Bend of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
110mm dia.
125mm dia.
140mm dia.
160mm dia.
225mm dia.
Supplying and Fixing uPVC Socket of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
110mm dia.
125mm dia.
140mm dia.
160mm dia.
Supplying and Fixing uPVC End Cap of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
110mm dia.
125mm dia.
140mm dia.
160mm dia.
225mm dia.
Supplying and Fixing of M.S Service Saddle confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.
Supplying and Fixing of Cast Iron Flanges confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.(for opening the chocked pipes in dam distribution system) ( a) Capacity of Air Compressor 300 cfm at 250 PSI.
Any Other Items (as per CSR)
majha construction and supply co.
The New Gautam Nagare Co-Op Labour contrcution society ltd.
ANIL KUMAR SHARMA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .