SPL REPAIR TO BLDG NO 454 OF KLER ENCLAVE AND SPL REPAIR TO PUMP HOUSE BLDG AT VARIOUS LOCATION UNDER GE (WEST) JABALPUR

Amount

Demolition of stone/brick masonry built in CM or cement/ lime mortar removing grass, fungus weeds, roots of trees completely on roof/wall surface complete all as specified and directed.

Demolition of cement conc. (Unreinforced) in ground floors and pavings n exc 15 cm thick (below or above ground level/ path) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick masonry to be finished even and smooth (without using extra lime or cement complete all as specified.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even mixed with water proofing compound @3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid sepraetely.

Supply only water proofing compound ISI marked.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

M&L for providing cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed.

S&F TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.

Suppy and laying Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Supply and laying hard core, broken stone / boulders to gauge n exc 63 mm laying in layers complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in sub-base of flooring/ hardstanding to receive tile etc complete all as specified and directed.

M&L for 50 mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floor complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

S& F Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Cutting holes in brick walls, Exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F Mild steel work for hold fast etc complete all as specified and directed.

S&F 35mm thick second class hard wood factory made panelled door shutters (any number of pannels) with panels of timber flat on both sides (feather edged) or of veneeved particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F 2nd class HW 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20; supplied and fitted to chowkats complete all as specified and directed.

S&F in repairs Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F 1.25mm thick mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F Butt hinges 100mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Mild steel barrel tower bolts 200mm size, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black complete all as specified and directed.

S&F Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F precoated steel window Rolled formed GI Section ECO 4000 (Openable double rebate window) Providing and fixing of single rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly meshsection 40X20mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter , fly mesh and 20mm provision for guard bars /grills, and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS( stainless steel) heavy duty pivot hinges per shutter and panelled window fitted with 5mm thick plain clear glass and SS mesh for fly mesh shutter with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

S&F steel windows or ventilators, fixed type with glazing bars complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repairs Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n,exc 0.5Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F in repairs for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n,exc 0.5Sqm in each pane complete all as specified and directed.

S&F 1st class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, with all necessary labours; articles n exc 200 cu. cm each incl 50mm size butt hinges complete all as specified and directed.

M&L for reflective rubber moulded chequered coloured cement concrete tiles 30cm x 30cm x 22 to 25mm thick set, jointed and pointed in ceat cement slurry in floors with colour cement and pigments fixed over and including 15 mm thick screed bed in CM 1:6 for laying floor finish complete all as specified and all as direcred.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of white wash on old decorated surfaces incl. preparation of surfaces complete all as specified and directed.

M&L for preparation Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for prepartion of new steel surfaces of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 complete all as specified and directed.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.

Dismantling of floor, hearth, wall tile terazzo in dado, walls tiles, including bedding but backing and rubbish off permises complete all as specified and directed.

M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Non skid ceramic joint free coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement to over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified

S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (min weight 210 gm) complete all as specified and directed by Engr-in-charge.

S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position including 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (min weight 210 gm) complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F in repair 20mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F in repair PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F in repair PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface including provision of lime concrete of floor all as specified and directed by Engr-in-charge.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge.

S&F in repair PVC connection 15mm dia size and 600 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F in repair chromium plated mild steel Towel Rack 600mm long with lower hangers complete all as specified and directed.

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F in repairs CP Glass corner Shelves set of three including CP brackets & screws complete all as specified and directed.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed.

S&F in repairs chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangementwith connecting legs, wall flannges and wall brackets for hand shower make as approved by GE complete as specified and as directed.

S&F in repairs Sink Mixer complete as specified and as directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

S&F in repair gunmetal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

S & F in repairs sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe in repair complete all as directed.

S&F in repair gunmetal, globe or gate valve for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet, Cupboard etc., (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.

Supply and fixing oil pull out, plain basket, thali basket, cup & saucer, cutlery bin holdes, tray (sleek make) of SS304 grade anticorrosive material complete all as specified and directed.

S&F hitched channels Chanel size exc 300mm n exc 500 mm long ) complete all as specified and directed.

S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F in repair stainless steel hinges for cupboards of senso (as per 3D designs) inclduding all connection fitting as complete all as specified and directed and approved by GE.

M&L for Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed. (i)M&L for 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm complete all as specified and directed. (iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.

M&L for applying two coats of bituminous base aluminium paint @ 100gm /Sqm on each coat including preparation complete all as specified and directed.

M&F for preparing new plastered surface of ceiling and applying three coat of white wash complete

M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) over and including 15mm thick screed bed in CM (1:6)complete all as specified and directed.

S&F in repair Steel rolling shutters, thickness of laths 1mm thick, with out ball bearing, as specified including top cover, an-choring rod, hasp and staple including one shop coat of primer, and erected in position as indicated, push pull or manual type complete all as specified and directed.

S&F in repair Steel rolling shutters, thickness of laths 1.25mm thick, with ball bearing as specified including top cover, an-choring rod, hasp and staple including one shop coat of primer and erected in position as indicated, but gear operater type wirh bevel gear box and crank handle complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2, using 20 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

Supply only mild steel galvanised, chain link fencing of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (Note: Each line wire shall be measured for payment)

S&F in repair mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note:- 10mm dia MS rods 3 Nos shall be provided horizontally by interwewaving in the chain link and welded with MS flat iron.

S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and directed.

S&F in repair Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E-250) quality-complete all as specified and directed.

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile pattern having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws as specifie

M&L for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick for coooking platform over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for machine cut kota stone slab, 20-25mm thick as in flooring over and including screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed.

Taking down window/ ventilator frame of any description not exc 1.5sqm each complete all as specified and directed.

S&F Factory made designer solid panel with pre laminateed wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly. Supplying and fixing complete all as per drawing and specification Make : Rajshree/Sintex.

S &F factory made single piece extruded solid PVC 3D wood grainmoulded door shutter 35mm (single rebate )made out of single piece extruded (SPE) solid PVC profile with smooth 5 mm thick sheet of 20 mm width for style & (5 x 2) 10 mm thick 20 mm width for top & bottom rails,SPE 5 mm thick sheet both side laminated inserted as panel a as mm thick per manufacturers specification and direction of Engineer-in-Charge (

S&F Solid PVC Door frame of any sizes 120 mm x50 mm made out of 5 mm plain colour PVC sheet both side laminated reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm complete all as specified and directed.

Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

S& F in repairs concealed type Stop cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe

M&L for 100mm thick cement concrete (1;2:4), type B-2 (using 20 mm graded stone aggregate) as in hard standing, laid in alternate bays and finished surfaces even and smooth using extra cement complete all as specified and directed .

M&L, for machine pressed precast concrete interlocking paver block rubber moulded glossy finished with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 40mm thick sand cushion below paver blocks complete all as specified and directed.

M&l for stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished as directed.

M&L for 35mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed.

S&F TMT Bar 6 to 8 mm dia and over cut to length bend to shape required incl cranking bendding spirally, hooking for ends and bindding with MS wire (annealed) not less than 0.9 mm dia complete all as directed.

All as per item above but 5mm dia and over upto and including 10mm dia as in stirupps, Spacers and binders complete all as specified and directed.

M&L for making foundation thrust blocks/support pillars for holding pipe line/clamp support etc by PCC 1:2:4 type B1 (using 20mm graded aggregate size) and using extra cement making good to surfaces including dismantling of old trust block complete all as specified and directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms)

S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F in repair jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F in repair CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed.

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F in repair Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F in repair for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair for 75mm diaPTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified 7and directed.

S&F in repair, cast iron nahani trap, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed.

S&F in repair salt glazed stoneware gully traps square or round mounthed, type 'P' of size 125 x 100mm, setting and jointing with cement mortar (1:1) complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) reducers complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) reducers complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4), type B1 using 20mm graded stone aggregate over roof in padding & finishing the surface even & fair without using extra cement all as specified & directed.

S&F in repair cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished over and including 15mm thick sceed bed/ bedding layer in CM 1:4 mixed with waterproofing compound @3% by weight of cement complete all as specified and directed Note : WPC shall be measured and paid separetely under supply only item)

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

M&L for Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

S&F 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

S&F in repair for Sub Main Wiring four single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and two run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Four of 6.0 Sqmm Wire and two No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

S&F in repair for Sub Main Wiring Two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

S&F in repair for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.0 Sqmm Wire and One No of 2.5 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge. (a) One light point/Bell point / fan point /Exhaust fan point controlled by one switch.

(b) One socket point controlled by one switch on same board.

(c) One socket point controlled by one switch on Independent board.

Description all as per item here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S & F Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge.

S & F switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S&F fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge.

S & F lamp holder PVC Polycarbonate type body, with back plate for batten fitting icluding 9 watt led lamp complete all as specified and as directed by Engineer in charge.

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets , the requirements of the Standard/Specification Make : Philips Cat part BN 021 LED 22S 6500 PSU GR SI or equivalent

S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS ,BAJAJ

S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj

S & F Exhaust fan heavy duty metallic body size sweep 300 mm sweep, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed by Engineer in-charge.Make:Bajaj/Havells/Crompton.

S&F Exhaust fan heavy duty plastic body size sweep 250 mm sweep, single phase AC 230 v, 50 Hz , including making hole of required size and making good the disturbed surface and including louvers with fitting accessories complete all as specified and directed by Engineer in-charge. Make:Bajaj/Havells/Crompton.

S&F in replacement sheet steel enclouser distribution boards, double door factory made Vertical TPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TPN 63 A -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.Make:Legrand /seimens/GE.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4 way with 100 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge .Make- Legrand/seimens/GE.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge Make- Legrand/seimens/GE. .

Supply and fixing in replacement MCB single pole 240 volts upto 40 Amps, C Series complete all as specified and directed by Engineer in charge Make- Legrand/seimens/GE.

Supply & Fixing in repair single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.Make:Legrand or equivalent

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge. Make:anchor or equivalent

Supply & fixing electronic energy meter tamper proof design digital technology of SINGLE phase 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete with fixing accessories on finished wooden box all as specified & directed at site.Make: SECURE or equivalent

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil

M&L for 150mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

S&F in repair for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge. Make: Bajaj/havells/Usha

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge. Make: Legrand cat no :5076 21 or eq in SEIMENS /GE

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge.Make: Legrand cat no :4086 18 or eq in SEIMENS /GE

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed by Engineer in charge

Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Kirti Chandeliya and Assosicates