Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC CITI COMPLEX KALAPAHAR GUWAHATI 781016 ASSAM | GUWAHATI | KAMRUP METRO | ASSAM | 781016 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹30.5 L+₹3.7 L (13.8%)Rejected-Finance | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹36.4 L+₹9.6 L (35.7%)Rejected-Finance GANGA NAGAR NEAR TUSHARCHAKRA MISAMARI 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | Rejected-Technical BISHNU RAVA PATH PO PS TEZPUR DIST SONITPUR ASSAM | TEZPUR | SONITPUR | ASSAM | - | Rejected-Technical DOES NOT BELONG TO APPROPRIATE CATEGORY. HENCE, NOT RECOMMENDED FOR OPENING | |
| 5 | Rejected-Technical P O P S MISSAMARI DIST SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | - | Rejected-Technical DOES NOT BELONG TO APPROPRIATE CATEGORY. HENCE, NOT RECOMMENDED FOR OPENING. |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE TENGA C/O 56 APO
SPECIAL REPAIR AND RENEWAL OF CERTAIN WOODEN AND STEEL FURNITURE AGAINST BER ITEM OF FURNITURE AND CONVERSION OF CHARPOY GI PIPE NEWAR INTO CHARPOY GI PIPE PLYWOOD TOP AT MISSAMARI MILITARY STATION UNDER GE MISSAMARI
2022_MES_554168_1
8316/E8
Open Tender
Civil Works
Item Rate
180 days
GE MISSAMARI
D and d i
8 documents required · 8 mandatory
₹500
Yes
GE MISSAMARI
₹72,000
Yes
16 Dec 2022
26 Sept 2022
31 Oct 2022
26 Sept 2022
24 Oct 2022
10 Oct 2022
Amount
Steel furniture
Manufacture and Supply of Almirah Large Steel with Shelves, complete all as specified and directed and shown on Drg No. ( FD-1031) Specification:- Over all size shall be 920mm long, 485 mm wide and 1985 mm high. Two numbers base channel ends covered 70mm wide and 100 mm high made of mild steel sheet shall be welded at 50mm inwards from each end of 920 mm length. Steel sheet shall be 1 mm thick.Four shelves equally spaced making five compartments shall be provided. Shutters shall be provided with a CP handle and a three-way locking device. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.
Manufacture and Supply of Almirah Medium Steel with Shelves, complete all as specified and directed and shown on Drg No. ( FD-1032) Specification:- Over all size shall be 765 mm long, 440 mm wide and 1270 mm high. Two numbers base channel ends covered 70mm wide and 100 mm high made of mild steel sheet shall be welded at 50mm inwards from each end of 765 mm length. Steel sheet shall be 1 mm thick.Three shelves equally spaced making four compartments shall be provided. Shutters shall be provided with a CP handle and a three-way locking device. All exposed steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg (FD-1032)
Manufacture and Supply of Bed Hard Steel complete all as specified and directed and shown on Drg No. (FD/E6/MAP/08 (R) ) Specification:-Over all size shall be 2050mm x 900mm. The Head and Foot Board shall be 800 mm and 500 mm high respectively. The long rails shall be of 65mmx25mmx18 gauge rectangular MS Tube. The frame of head board and foot board along with legs shall be of 38mmx38mmx 18 gauge MS Tube and rubber shoe of best quality should be provided on the bottom of the legs. 18 mm x 18 mm x 18 Gauge MS Tube shall be provided in the inner of head board/foot board frame as shown in drg. One stiffener of size 25mmx25mmx18 gauge shall be welded between the two legs of head board over 125 mm from the ground level. Four equidistant stiffeners of 25mm x 25 mm x 18 gauge MS Tube shall be provided between the two long rails. The end stiffeners shall be 150 mm away from the head and foot board respectively. All steel surfaces shall be spray painted with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer. 18/19 mm thick walnut shade, PVC edging, exterior grade, both side laminated Pre-laminated particle board shall be provided on head and foot board dully screwed to 20 mm x 45mm x 3mm thick MS strip as shown in drg. The Top of the bed hard shall be of 12 mm (7ply) thick BWR grade, IS 303 plywood of approved make fixed over the four stiffener to level with the top of the long rails as 400 mm high from the ground level. Rest all as specified and as directed by Engr-in-Charge.
Manufacture and Supply of BOOK CASE STEEL complete all as specified and directed and shown on Drg No. (FD-1028) Specification:- Over all size shall be 840mm long, 310 mm wide and 1675 mm high. There shall be 4 Nos. equidistant shelves making four compartments. The bottom shelf shall be 120mm above the ground level. Each compartment shall have an openable glass shutter moving on wheel fixed in MS channel guided rail provided with 65mm wide MS sheet frame alround the 3mm thick glass pane along with 2 Nos. 100 mm CP handle and Godrej lock and a common key for all compartments. MS sheet shall be 1 mm thick. All exposed steel surface shall be painted witn two coat of light grey/olive green coloured enamel paint over a coat of primer. Rest all as per drg and as directed by Engr-in-charge.
Manufacture and Supply of Chair Verandah complete all as specified and directed and shown on Drg No. (FD-359). Specification:- Over all size shall be 460 mm long 600 mm wide and 760 mm high. All frame shall be made of 20 mm dia and 1.6 mm thick mild steel conduit pipe except 10sqmm MS Tube welded between the legs as per drg. The horizantal distance between legs at seat level shall be 450 mm and same shall be 600 mm at bottom. Seat and back shall be woven with 4 mm wide Nylon cane, mat pattern as per trade practice. Best quality hard rubber shoes to be provided at the bottom of legs. All exposed steel surface shall be painted with two coats of white coloured enamel paint over a coat of primer. Rest all as per drg. (FD-359)
Manufacture and Supply of Chair CB steel with Arms complete all as specified and directed and shown on Drg No. (FD-75 (M)) Specification:- Over all size shall be 535mm wide 560 mm deep and 900 mm high. Seat shall be 450mm high from floor. Frame shall be made of 20 mm dia 1.6 mm thick conduit pipe. Seat and back of chair shall be made of wooden frame duly canned with 2 mm wide 0.40 mm thick cane. All exposed steel surface shall be painted with two coat of light grey/green coloured enamel paint over a coat of primer. The sheet and back frame shall be fixed with suitable nut & bolt to 8 Nos 3 mm thick FI clamp of 35mmX75mm which shall be welded to rest the sheet and back and Rest all as per drg.
Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood Top
M&L for removing U/S Nylon Newar and tightening the loose components including 4 Nos hexagonal check nut for each charpoy, complete as specified and directed by Engr-in-charge (FD-220)
M&L for replacement of Long Rail complete (FD-220)
Labour only for making Short Rail from U/S long rail complete (FD-220)
Labour onlyfor making Leg from U/S Long and Short Rails including cutting and threading complete (FD-220)
M&L for Wooden Gutka on the bottom of Legs, complete as specified and directed by Engr-in-charge.(FD-220)
M&L for replacement of three way elbow as per drg complete as specified and directed by Engr-in-charge. (FD-220)
M&L for fixing of 12mm ply fixing with nut and bolts and welding of three flat iron strip between the long rails, complete as specified and directed by Engr-in-charge. (FD-220)
Wooden furniture
Manufacture and Supply of Chair Dining complete all as specified and directed and shown on Drg No. (FD-279) Specification:- Over all size shall be 440mm long in front side and 405 mm in rear side, 430mm wide and 890mm high. All wood shall be teak wood. Caning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane. All exposed wooden surface shall be french polished. Rest all as per drg.
:Manufacture and Supply of Peg Table complete all as specified and directed and shown on Drg No.FD-384. Specification:- Over all size shall be 450mm long 300 mm wide and 380 mm high. Leg shall be 50mm x30mm in section. 5mm x 5mm in dection groove shall be provided at the visible portion of top of legs. H type stiffener of size 20 mm x 50mm shall be provided even not shown on drg. All wood shall be teak wood.Top of table shall be 18mm thick exterior grade prelaminated MDF board with decorative choice lamination on one side and balancing white lamination on the other side with 4mm thick teak wood edging alround duly poilshed. All wood shall be teak wood. All exposed surface shall be given french polish mixed with necessary pigment to match the colour of the top. Rest all as per drg.
Manufacture and Supply of Sofa Set 4 Seater complete all as specified and directed and shown on Drg No.(FD-281) Specification:- The set shall be consist of four single seat. The overall size of single seater sofa shall be 670x725x745mm. Legs and arms shall be 70mm x 35 mm in section. Front and side rails shall be 35mm x 100 mm teak wood. The back frame of the sofa shall be of 70X35 wooden frame provided with 50X20 wooden battens. The seat of the sofa shall be made up of 50X20 wooden battens over 3 Nos 40X40 wooden bearers over which foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tapestry cloth as approved by GE not less than 350/- per RM shall be provided. one nos of foam cushion each shall be provided on the seat and back of single seater sofa. All wood shall be teak wood. All exposed surface shall be french polished. Rest all as per drg.
Manufacture and Supply of Sofa Set 5 Seater complete all as specified and directed and shown on Drg No.(FD-281) Specification:- The set shall be consist of two single seat and one three seat. Over all size of the frame of three seater sofa shall be 1730x725x745mm. Similary, the overall size of single seater sofa shall be 670x725x745 mm. Legs and arms shall be 70mm x 35 mm in section.Front and side rails shall be 35mm x 100 mm teak wood. The back frame of the sofa shall be of 70X35 wooden frame provided with 50X20 wooden battens. The seat of the sofa shall be made up of 50X20 wooden battens over 3 Nos 40X40 wooden bearers over which foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tapestry cloth as approved by GE not less than 350/- per RM shall be provided. Three nos of foam cushion each shall be provided on the seat and back of three seater sofa while one nos foam cushion each shall be provided on the seat and back of single seater sofa. All wood shall be teak wood. All exposed surface shall be french polished. Rest all as per drg.
Manufacture and Supply of Teapoy Wooden complete all as specified and directed and shown on Drg No.( FD-278) Specification:- Overall size shall be 600mm long 450mm wide and 540 mm high.Leg shall be 60mm x 30mm in section.5mm x 5mm in section groove shall be provided at the visible portion of top of legs. H type stiffener of size 20mm x 50mm shall be provided even if not shown on drg. All wood shall be teak wood. Top shall be made up of 18mm thick Particle board exterior grade with decorative choice lamination on one side and balancing white lamination on the other side of approved shade and make with 4mm thick TW edging all round. . All exposed surface shall be french polished mixed with necessary pigment to match the colour of the top. Rest all as per drg.
M/S B.N. Prasad
M/S K.K.TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .