Provision of Periphery campus Area Lighting for Govt. College OF Engineering Kalahandi at Bhawanipatna in the district of Kalahandi in the year 2026-27

S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty)

Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge.

Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.

Supply,Installation,Testing & Commissioning of 9 Mtr long Galvanized PU painted octagonal pole with 100watt Street light,6A. MCB,Connector with all other wiring material,Pole with top dia.-70mm,Bottom dia.-155mm,PCD-250mm,Thickness-3.1mm with foundation bolt and decorative bracket of 1 Mtr long suitable for holding 1 No of 100 Watt LED Street light.The pole design must be suitable for wind speed as per IS 875,IS 2062 grade E350/BS EN 10025 S355 Low Silicon (-0.06%) High Tensile Steel Sheet as per IS 2062/BS EN 10025 Or Equivalent.Hot Dipped Galvanized,as per BS EN ISO 1461 Average coating should be 55 microns.E250 Grade as per IS 2062 of Make (Bajaj Cat.No.BOP 9030 or equivalent of Klite/Valmount) 100W LED Street light with Epoxy powder coated pressure die-cast alluminium housing and LED driver cover with Silicon gaskets provided for LEDs and control gear compartments.LEDs must have with non-yellowing secondary lense optics.The driver used is specially designed to have built-in surge voltage,open/short circuit protections,External surge protection of 10 KV provided for additional safety.Side entry mounting for 55 to 60mm OD pipe bracket,Top maintenance: Access to driver is from the top.The fixture must have-12000 LM with peak power consumption of 100 Watt.The lighting fixture must deliver average 25 Lux of 6Mtr road.(Make:-Bajaj Model No.ENXT P 120L WH or equivalent to Philips/LT)

Supply,Transportation, Erection,Testing & Commissioning of 9Mtr. Long Hot Dip Galvanized Octagonal pole with Circular Arm Bracket made up of High tensile steel and high purity zinc suitable to withstand the wind speed of 180 Km/Hr as per IS 875,with Foundation Base plate of dimension (L-250xB-250mmxT-16mm),Pole dimension as Top dia-70mm,Bottom Dia-155mm,sheet thickness-3mm,Foot rest .Foundation bolt of size-M20xlength 750 mm with hot dip galvanized.(Make of Pole-Bajaj/Utkarsh/Electro/Eq.). Complete with connector Junction box, Protector switch gear(Make Havells/Eq.)

Excavation of pole pit in all kind of soil including rock of all verity of size 600mm x 600mm and depth 1200 mm with filling of sand to a height of 100mm ,100mm metal concrete and then laying foundation of Reinforced cement concrete (1:2:4) of 450mm x 450mm x 1000mm high with granite metal of nominal size 20mm to 25mm including side shuttering and grouting of foundation bolts and supply and erection of pole as specified above including watering and ramming it a required including provision for passage of cables and finishing the surface with 1:4 ratio cement plaster.

Supplying, Erection, Fixing, connection & testing of 100W FLOOD Light (120LM/W) of Panasonic /LT/ Havells /Philips /Wipro /Crompton /Bajaj) maintenance free having 5 years warranty wit including MCB,stainless steel braket along with driver & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.

S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) to be installed existing LT PSC Pole

S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing MCB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials

Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years