CA NO. CWE SGNR - 64 OF 2020-21 SPECIAL REPAIRS TO ROADS FROM INF BN-III CHOWK TO TCP NO. 3 AT MILITARY STATION ABOHAR

Amount

M&L for repair to pot holes any depth, n. exc. 2 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, path, etc; cutting around edges to at least 25mm in depth, making good by filling in and including screened & graded road metal, watering and well ramming and applying evenly a tack coat with bituminous primer (VG-10) @ 5Kg/10Sqm for putting in and including premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of binder and chippings), depth of potholes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for preparing unsurfaced existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and material & labour for applying evenly a tack coat with bituminous primer (VG-10) @ 5Kg/10 Sqm on bituminous surface complete all as specified and directed by Engineer-in-Charge.

M & L for providing 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.50% binder content (bitumen of grade VG-30) by weight of total mix, laid with self propelled mechanical paver finisher, rolled and compacted to required camber and gradient with Tandem Vibratory Roller complete all as specified and directed by Engineer-in-Charge.

M & L for providing premixed bituminous macadam (compacted thickness 75mm or less) using 4% binder content (VG-30) by weight of total mix laid with self propelling mechanical paver finisher, rolled and consolidated to required gradient and camber complete all as specified and directed by Engineer-in-Charge

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking paint, for a dry film 2.5mm thick @ 5 Kg per Sqm. Binder contents 18.0% min, glass beads 30-40%, Titanium, Dioxide 10.0% min, CaCos and inert fillers 42.0 max, including preparation of old / new surface complete all as specified and directed by Engineer-in-Charge. Make : Reliance / Shivalik / Swastic

S&F in replacement of dual directional reflective cat eye of size 100mm x 100mm x19mm of impact resistance ABS plastic stud having ultra violet resistance colour with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye by hammering complete all as specified and directed by Engineer-in- charge. Make: Dark Eye (Model No. DA-978) or equivalent of International Wire Product / Greenlite / TATA BP

S&F in replacement Solar road stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargeable battery having view distance 1000 meters, LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night complete all as specified and directed by Engineer-in-Charge. Make : Model Dhruv DA-110 or Sinor infrastructure or equivalent Model of Dark Eye / Greenlite / TATA BP

S&F in repairs, MS round delineator 50mm dia and 600mm long having 2 Nos. 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50 duly powder coated anti rust and anti theft steel net available in Red / White or Yellow and embedding the same in PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. Make : Sinor Infrastructure or equivalent of Dark Eye / Greenlite / TATA BP Note : Size of PCC block for embedding delineator shall be 30cm x 30cm x 30cm and cost of PCC shall be included in the unit rate of item.

S&F in repairs of solar delineator road of size 1000mm x 47mm, made out of polycarbonate and toughened aluminium body fitted with high intensity retro reflector in yellow / red colour fitted on CRCA pipe 47mm dia and 100cm long powder coated or stove enamelled white / black colour provided with steel wire mesh made up into cage for safety of reflector and embedding the same in PCC 1:2:4 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. Make : International Wire Products (Model No. IWP5) or equivalent of Dark Eye / Surya Enterprises / Greenlite / TATA BP. Note : Size of PCC block for embedding delinator shall be 30cm x 30cm x 30cm and cost of PCC shall be included in the unit rate of this item.

S&F speed bump of dimentions 730mm x 245mm x 70mm made out of ABS with resistance and wear and tear properly highly reflective reflectors moulded in PMMA material, welded with ABS base plate fixed on roads with adhesive and zinc plated nails as recommended by the manufacturers and complete all as specified and directed by Engineer-in-Charge. Make : Dark Eye DA-1006 or equivalent in Surya Enterprises / Greenlite / TATA BP Note : A sum of Rs. 2,600.00 will be deducted on account of credit for taken down material. Please refer details on Srl Page No. 18 (Schedule of Credit) of Tender documents.

M/s Amit Construction Company