Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.2 Craccepted-aoc | ₹5.2 Cr | accepted-aoc |
Tender Value
₹5.7 Cr
EMD Value
₹8.6 L
Closing Date
30 Mar 2026, 9:30 pmClosed
North Western Karnataka Road Transport Corporation
N V Shivamurthy
Construction of New Divisional workshop and its sub works at Chikodi.(Phase-1) (Call-2)
NWKRTC/2025-26/BD/WORK_INDENT70/CALL-2
NWKRTC/2025-26/BD/WORK_INDENT70/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
NWKRTC Divisional Controller Office Belagavi
To Qualify for award of this contract, the Tenderer, as a prime contractor, should have in his name satisfactorily completed at least one similar nature of i.e., Building construction work costing not less than Rs. 286.25 Lakhs during the last five years i.e, from 2020-21 to 2024-25. The work must have completed till the last date of submission of tender. Work Done Certificate shall clearly mention the Date of completion of the certified work. Scanned copy of the Work done/ Work Completion Certificate, Certified by an Officer not below the rank of Executive Engineer for work done in Govt. /Public Sector Undertakings.
To Qualify for award of this contract, the Tenderer, as a prime contractor, should have in his name, Executed in any one financial year during last five years i.e. from 2020-21 to 2024-25, the minimum quantities of works mentioned below. a) PCC/DLC/RCC - 1377.00 Cum, b) Reinforcement steel - TMT /HYSD/ Mild steel 62648.00 Kg, c) BBM/SSM/CC Solid block/Similar Masonry wall - 363.00 Cum, d) MS Structural steel - 35905.00 Kg, e) Precoated galvanised iron profile sheet - 1629.00 Sqm, f) Flooring (Granite/Vitrified/Ceramic/Tandur/Cudapa) - 1687.00 Sqm, g) Plastering work - 5079.00 Sqm, h) Interlock pavers - 2484.00 Sqm. Scanned copy of the Work done /Completion Certificate, along with details of quantities executed, Certified by an Officer not below the rank of Executive Engineer for work done in Govt./public sector undertakings should be uploaded.
The bidder must have following Key & critical equipments. a) Owned:1. Hydraulic Excavator (JCB/Hitachi etc) - 01, 2. Tipper - 02, 3. Self loading Concrete batch mixing plant/ machine mixture/Transit mixer, like Ajax -01, 4. Water tanker - 01, 5. Shuttering materials -2000.00 Sqmtr. b) Hired/lease basis: 1. Hydraulic Excavator (JCB/Hitachi etc) - 01, 2. Tipper - 02, 3. Water tanker - 01, 4. Shuttering materials -2000.00 Sqmtr, 5. Self loading Concrete batch mixing plant/machine mixture/Transit mixer, like Ajax -01. Details of having key and critical equipments owned/hired/leased by the bidder, should mention such details in the prescribed format (Annexure-C) and duly signed by the bidder, the same should be uploaded in the portal. Otherwise bid will not be considered for evaluation.
To Qualify for award of this contract, the assessed available tender capacity (AATC) of the tenderer should be more than the amount put to tender. The Bidder/Contractor must submit details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) duly signed. In case the Bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format (Annexure-B), duly signed. Details submitted in any other format or submission of document in which the Bidder himself has calculated the Bid capacity will not be considered for evaluation and also will not qualify for eligibility. For further details refer detailed tender notification.
To Qualify for award of this contract, the Tenderer must have appropriate valid Class - 1 Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of valid contractors Registration Certificate.
To Qualify for award of this contract, the Tenderer in his name should have, in the last five financial years (i.e. during the years 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) achieved in at least two financial years a minimum financial turnover of Rs. 1145.00 Lakhs ( in all classes of civil engineering construction works only). Scanned copy of year wise audited profit / loss statements of two financial years in which minimum financial turnover of Rs. 1145.00 Lakhs is achieved. (Certified by Chartered Accountant only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract, the Tenderer has to furnish Liquid assets statement or availability of credit facilities for an amount not less than Rs. 171.75 Lakhs, Letter of Credit issued from any Nationalized Bank / Schedule bank (excluding Co-operative banks) in the prescribed format. Scanned Copy of the Credit Lines / Letters of Credit / Certificates from any Nationalized Bank / Schedule bank (excluding Co-operative banks), clearly specifying name of the work or Work Indent No.(as per the prescribed format) addressed to the Executive Engineer, NWKRTC C.E. Division, BELAGAVI (Annexure-A) duly signed by Bank Manager with date.
DELETED
DELETED
DELETED
DELETED
DELETED
DELETED
DELETED
DELETED
₹5,000
₹8.6 L
30 Mar 2026
21 Mar 2026
1 Apr 2026
26 Mar 2026
26 Mar 2026
Construction of Divisional workshop Main building (GF)
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) i...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel e...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat m...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with Mathi or Nandi wood patties of 50 mm x 12 mm size, including two coats approved paint etc., complete. (Including cost of screw...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g (CSR 2023-24/Vol- 2 / 118 / 13.17.1 )
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (CSR 2023-24/Vol- 2 / 124 / 14.7.1 )
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing & fixing double seal cover off size , 24 '' x 24 '' @ 30 kg wt ( OLD SER 2016-17 ) XXXVIII
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Construction of Gents rest room over workshop building (FF)
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat m...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Distempering with Oil Bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SRP Vol- 2 / 124 / 14.7.1 )
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm (SRP Vol-2 / 126 / 14.13.2 )
Providing and fixing 100 mm sand cast Iron grating for gully trap (SRP Vol-2 / 128 / 14.29 )
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Construction of Store building
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt rushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colo...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat m...
Providing and fixing hydraulic door closures-with mounting heavy duty. (SRP 37.32 )
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel e...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120...
KSRB 14.9-2 : Providing and laying M-15 cement concrete flooring 60 mm thick with metallic concrete hardner topping, under layer of 45mm thick M-15 cement concrete using broken granite metal of 20mm a...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g (SRP Vol- 2 / 118 / 13.17.1 )
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangul...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing & fixing double seal cover off size , 24 '' x 24 '' @ 30 kg wt ( OLD SER 2016-17 ) XXXVIII
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Construction of Septic Tank (2 Nos)
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Parking area development
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per d...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and Laying 80mm thick factory made precast M-30 grade cement concrete paver Block as per IRC SP 63: 2018 and IS 15658 for commercial traffic Axle load repetitions up to 10 MSA and for Res...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Electrification Works
Supplying heavy gauge PVC conduit pipe 20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
25mm dia 2 mm thick PVC Conduit Pipe. Make:Finolex/AVONPLAST/V I P /CSR 2023-24. VOL-6, PART-III, SRP 2 of 105, 1.1.2
32 mm dia 2 mm thick PVC Conduit Pipe. Make:Finolex/AVONPLAST/V I P /CSR 2023-24. VOL-6, PART-III, SRP 2 of 105, 1.1.3
Supplying heavy gauge PVC conduit pipe 20 mm dia 2 .mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc....
25mm dia 2 mm thick PVC Conduit Pipe. Make:Finolex/AVONPLAST/V I P /CSR 2023-24. VOL-6, PART-III, SRP 2 of 105, 1.2.2
Supplying heavy gauge PVC Conduit Pipe 20mm.. dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bra...
25mm dia 2 mm thick PVC Conduit Pipe. Make:Finolex/AVONPLAST/V I P /CSR 2023-24. VOL-6, PART-III, SRP 2 of 105, 1.3.2
Supplying PVC flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
2.5mm2 copper Wire .Make: Finolex/Polycab/V-Gaurd/havells/
CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.3.
4 mm2 Copper Wire. Make: Finolex/Polycab/V-Gaurd/havells/
CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.4.
6 mm2 Copper Wire. Make: Finolex/Polycab/V-Gaurd/havells/
CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.3.5.
16 mm2 Copper Wire. Make: Finolex/Polycab/V-Gaurd/havells/
CSR 2023-24. VOL-6, PART-III, SRP 6 of 105, 2.3.7.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wi...
Medium Point above 3 mtr upto 6 mtr from tapping Point to out let via switch. CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.1.2.
Long Point above 6 mtr upto 10 mtr from tapping Point to out let via switch. CSR 2023-24. VOL-6, PART-III, SRP 5 of 105, 2.1.3.
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
6 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.4.
10 - 12 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.6.
16 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.7.
18 Way galvanized metal box.CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.4.8.
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
6 Module. modular switch mounting polycarbonate plate. Make:Anchor/GM/CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.4.
10 - 12 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.6.
16 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.7.
18 Module modular switch mounting polycarbonate plate. Make:Anchor/GM/ CSR 2023-24. VOL-6, PART-III, SRP 8 of 105, 3.5.8.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A One Way Switch. Make: Anchor/GM/CONA/LISHA.CSR 2023-24. VOL-6, PART-III,...
6 A Three Way Socket Modular type. Make: Anchor/GM/CONA/LISHA.
CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.3.
Stepped Fan Regulator Two Module Modular type.Make: Anchor/GM/CONA/LISHA.CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.4.
16 A One Way Switch Modular type.Make: Anchor/GM/CONA/LISHA.
CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.7.
6 A Bell Push Modular type.Make: Anchor/GM/CONA/LISHA.
CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.8.
6 / 16 A Universal socket Modular type.Make: Anchor/GM/CONA/LISHA .CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.10.
R J 45/ I.O Socket Modular type.Make: Anchor/GM/CONA/LISHA.
CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.6.12.
Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws.CSR 2023-24. VOL-6, PART-I...
Supplying and fixing of metal clad industrial plugs and sockets. 2 pole + earth 250V PLUG 16 A. CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.13.1.
2 Pole + earth 250 V SOCKET 16 A . CSR 2023-24. VOL-6, PART-III, SRP 9 of 105, 3.13.5.
Supplying And fixing of 6 A electrical accessories on existing switch board.6 A Bakelite Ceiling Rose. CSR 2023-24. VOL-6, PART-III, SRP 10 of 105, 3.14.5.
Supplying And fixing of 6 A electrical accessories on existing switch board.6 A Batten Holder. CSR 2023-24. VOL-6, PART-III, SRP 10 of 105, 3.14.7.
Fabrication, Supplying, Erection, Testing and Commissioning of 16 mtrs long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of to...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm B...
Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation,...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, CSR 2023-24. VOL-6, PART-III, SRP 20 of 105, 5.42.2
Supplying 100 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, ...
250 A 4X 30X 10mm Aluminium Strips.
CSR 2023-24. VOL-6, PART-III, SRP 20 of 105, 5.40.2
600 A 4 X 75 X 10mm Aluminium Strips.
CSR 2023-24. VOL-6, PART-III, SRP 20 of 105, 5.40.4
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then...
75 X 75 X 6mm angle Iron frame work.CSR 2023-24. VOL-6, PART-III, SRP 20 of 105, 5.41.3
75 X 150 X 75 X 6mm C channel.CSR 2023-24. VOL-6, PART-III, SRP 20 of 105, 5.41.5
Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).400 A.Make: L&T / ABB...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
200 A 25kA Four Pole.MCCB.Make: L&T / Sneider / Legrand / Havells.
CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.15.12
320 - 400 A 50 kA Four Pole.MCCB.Make: L&T / Sneider / Legrand / Havells. CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.15.17
500 - 630 A 50 kA Four Pole.MCCB.Make: L&T / Sneider / Legrand / Havells. CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.15.19
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, d...
Supplying and fixing of Shunt trip suitable for MCCB.CBCT.
CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5 .16.
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
6 - 32 AMPS TPN MCB. Make: L&T/Legrand/Snieder/Havells.
CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.18.7
50- 63 AMPS TPN MCB. Make: L&T/Legrand/Snieder/Havells.
CSR 2023-24. VOL-6, PART-III, SRP 17 of 105, 5.18.9
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for ...
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter.CSR 2023-24. VOL-6, PART-III, SRP 19 of 105, 5.29.
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. CSR 2023-24. VOL-6, PART-III, SRP 19 of 105, 5.34.
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotatin...
Digging of Pit for providing GI Pipe type Earthing. In Hard Soil.
CSR 2023-24. VOL-6, 11 KV Labour charges, SRP 43 of 81, 22-1.6.2.
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI strips for grounding connections, using necessary fixing materials as required.25X3 mm G I Strip.CSR 2023-24. VOL-6, 11 KV Labour charges, SRP 54 of 105, 12.58.2
Guy Wire & GI Wire as per IS-2141. 8 SWG G I Wire.( 4.064mm dia),
CSR 2023-24. VOL-6, 11 KV Materials, SRP 5 of 81, 61/8.02.
Supplying and fixing of DANGER/NO ADMISSION/NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint.PWD Electrical S R 2010-11. SRP 68/12
Supplying and installation of RUBBER MAT 10mm ( 3 by 6).
PWD Electrical S R 2010-11. SRP 68/13)
Supplying of 4' feet - LED PVC square Batten 22W with integrated LED tube22 high quality diffuser with life of 25000 burning hours and 70% lumen mentainance with CRI 80 Power input:220-240V at 50/60H...
Supply of recess mounting non integral type 1' X 1' 24 W luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 de...
Supply of recess mounting non integrated type LED down light 15-18 watt luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false celing clamps,LED of Power/COB w...
Supply of recess mounting non integral type 40-42 watts luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 degr...
LED Street light: Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with i...
LED Flood light: Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with inj...
do as above but 200 Watts LED Flood light fitting.
CSR 2023-24,VOL-6, PART-III, SRP 44 of 105 / 11.9.6
Supplying of Ceiling fan with Capacitor rating as per guidelines of BEEE 5 Star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendmdnet. Rated voltage 220 V / 50 Hz,Rated power i...
Supplying Wall mounting fan suitable to operate at single phase 230V A.C.Supply.400mm. Make:Bajaj/Usha/CG/Orient/Almonard/Khaitan.
CSR 2023-24,VOL-6, PART-III, SRP 30 of 105 / 6.5.2
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on230V 50Hz, AC Supply.Make: Crompton / Bajaj / Usha / Havel...
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, requ...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0...
Supplying and Fixing 32 mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed f...
Fixing halogen/metal hallide/SVL/IL /LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete.CSR 2023-24,VOL-6, PART-II...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessar...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. CSR 2023-24,VOL-6, PAR...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, . In Hard Soil. ...
Providing & Installing at site of work PVC pipes including cost of pipes & specials & labour,including lowering into trenxhes laying true to line , level & perfect linking at joints leak proof includi...
75 mm P V C Pipe. CSR 2023-24. VOL-5 BWSSB, Chater-10. SRP 120/10.14.9
140 mm P V C Pipe. CSR 2023-24. VOL-5 BWSSB, Chater-10. SRP 120/10.14.12
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...
450 X 450 X 600mm Inspection chamber.
Water Supply & UGD Works CSR 2023-24, Volume-V. SRP 191/16.10.
G I Pipe. 50mm dia.CSR 2021-22,Volume-VI, SRP / 49/410-49.05.
do as above but 100 mm dia G I Pipe.
CSR 2021-22,Volume-VI, SRP / 49/413-49.05.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 10 ...
do as above but 16 SQmm 4 Core LTUG Cable.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81, 201 / 32.05.
do as above but 25 SQmm 4 Core LTUG Cable.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81,204 / 32.08.
do as above but 50 SQmm 4 Core LTUG Cable.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81,208 / 32.12.
do as above but 95 SQmm 3.5Core LTUG Cable.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81,210 / 32.14.
do as above but 150 SQmm 3.5Core LTUG Cable.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81,/212 / 32.16.
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. Inexisting trench/duct..2.5 sqmm to 25 Sqmm size.CS...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structures.35 sqmm to 95 sqmm size.CSR 2...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structures. 120 SQmm to 240 sqmm size.CSR...
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) , 25mm size. CSR 2023-24, Volume-6, Part-III ,Lbaour charges, SRP 28 of 81, 507 /63.01
45mm Brass Cable gland.CSR 2023-24, Volume-6, Part-III ,Lbaour charges, SRP 28 of 81, 507 /63.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 27 of 81, 469 /60.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.16 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 27 of 81, 470 /60.02
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 457 /59.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.50 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 459 /59.03
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 461 /59.05
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 150 Sqmm size. CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 463 /59.07
Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required.25X 3 mm G I Strip. CSR 2023-24, Volume-6, Part-III , SRP 54 of 105, 461 / 12.58.2.
Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3mm Copper Plate.
CSR 2023-24, Volume-6, Part-III , SRP 55 of 105, 461 / 12.58.1...
Supplying and drawing UTP- CAT 6E LAN cable. BIS approved make
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.1.
Supplying & fixing of switch mounting rack with power manager & Cable manager.18 U with 650mm depth.CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.4.5
Supplying & fixing of Network switches. 48 port 10/1000 switch.
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.9.4
Supplying & fixing of I/o Socket with back box.Single I/o.
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.10.1
Supplying & fixingof 2mtr Cat 6 Patch cable.
CSR 2023-24, Volume-6, Part-III , SRP 37 of 105 / 8.11.1
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure - B_Bid Capacity new.doc
Others - Annexure - B • 0.03 MB
Annexure - C Machinery.doc
Others - Annexure - C • 0.03 MB
Annexure - A_Letter_of Credit new.doc
Others - Annexure - A • 0.03 MB
16_New DWS at Chikodi- Call-2.docx
Tender Document • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .