REPAIR/MAINT OF DAMAGED FLOOR, WALL TILES, JOINERY AND ALLIED WORKS IN KV AREA/10 AFH/ARJAN AREA AND REPAIR/MAINT INCLUDING CAMOUFLAGE PAINTING AND PLASTERING OF BOUNDARY WALL AT AFS HASIMAR

Amount

Demolition of un-reinforced cement concrete of any description not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M&L for 40mm thick, PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) as in alternate bays and finished the surface even and smooth using extra cement, complete all as specified and directed.

S&F glass dividing strips, 3mm thick, width of strip 38m, inserted in position, conform to design, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

All as per item No 5.00 here-in-before but as in skirtings/dado incl rendering 10mm thick in CM (1:4) as backing coat to receive wall tile, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580 x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal), white (EWC) including plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

M&L in repair PVC(SWR) gully trap, setting and jointing with solvent cement 125/110mm, complete all as specified and directed.

S & F in repairs, cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle with and including 32mm dia PVC flush pipe, complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

Taking down cement plaster on brick or concrete wall surface including racking out joints, hacking for key, scrubbing down with water, etc, compelete all as specified and directed.

M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces fair and even, complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using extra cement) as in ceiling, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting primer, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area exc. 1.5 Sqm but n. exc. 4 Sqm each, complete all as specified and directed

Taking down chowkhats with shutters (without taking off shutters from the frames) area n. exc. 1.5 Sqm each, complete all as specified and directed

Taking down shutters of any description area n. exc 1.00 Sqm each, complete all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but not exc. 2.00 Sqm each, complete all as specified and directed.

S&F 125 x 60mm size factory madepressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 105 x 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M &L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, filling in MS pressed door/tank frame, hold fast blocks, fixing angle iron etc, including form work, complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, wire mesh etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F in repair 25mm prelam wooden finished PVC plastic celluka ply for self cupboard etc including all required accessories and builder hardware as per direction, complete all as specified and directed.

S&F in repair 18mm prelam wooden finished PVC plastic celluka ply for self of cupboard etc including all required accessories and builder hardware as per direction, complete all as specified and directed.

S&F in repairs 15mm thick second class hard wood boarding clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each and refixing in the same opening after necessary repair work, complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm each and n. exc 2 sqm each and refixing in the same opening, complete all as specified and directed.

S&F 100mm size long MS butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F 75mm long, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt of extruded section, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F 300mm long MS, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F MS clamps, hold fast, hook. washer & similar small articles comfirming to Fe-290 Gde-E-165, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F mild steel window with side hung shutter (ISI marked) factory fabricated, including projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel windows with side hung shutters (ISI marked) factory fabricated, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded, complete all as specified and as directed.

S&F steel ventilator with top hung shutter (ISI marked) factory fabricated, including hinges steel peg stay, complete all as specified and as directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed

All as per itme No 59.00 here-in-before but metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 100mm size hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screw, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and as directed.

S & F in repairs, aluminium (die cast) body door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.

S&F in reapair double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

Taking down aluminium doors/window shutters of area exc. 1.00 sqm but not exc. 2.00 Sqm each and carrying out minor repair/adjusment of shutter or frame including rubber beading, aluminium beads, cleats of required size and refixing in same position, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and smooth without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of 100% premium acrylic smooth exterior emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern over a coat of exterior emulsion primer, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of 100% premium acrylic smooth exterior smooth emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern, complete all as specified and directed.

M&L for complete removal of existing treatment of old surfaces of wall and applying two coats of 100% premium acrylic smooth exterior emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern over a coat of exterior emulsion primer, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles and removing rubbish off the premises, complete all as specified and directed

M & L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.

All as per item No. 78.00 here-in-before but except bricks, complete all as specified and directed. Note-(i) Brick shall be obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition.

Note: An amount of Rs.40,795.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

BHARAT ELECTRIC (BID ID -3348784)

M/S ROY ENTERPRISE (BID ID -3350955)

SHRI D P AGARWAL (BID ID -3350975)