Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC FLAT NO 81 BLOCK C INDUSTRIAL HOUSING ESTATE SHYAMNAGAR SHYAMNAGAR SHYAMNAGAR NORTH 24 PARGANAS WEST BENGAL 743127 | 24 PARAGANAS NORTH | WEST BENGAL | 743127 | ₹9.1 L Quoted ₹11.3 L | L1 | Accepted-AOC Offer of lowest bidder has been accepted. |
| 2 | L2₹15.0 L+₹3.6 L (32.1%)Rejected-Finance A 35 TAKSHSHILA APARTMENT 57 I P EXTN I P EXTN EAST DELHI DELHI 110092 | EAST DELHI | DELHI | 110092 | ₹15.0 L+₹3.6 L (32.1%) | L2 | Rejected-Finance Not qualified as lowest bidder |
Tender Value
₹9.2 L
EMD Value
₹18,370
Closing Date
12 Aug 2023, 3:00 pmClosed
Executive Engineer (E), BSNL, Bhubaneswar
Door Sanchar Bhawan, Unit-IX, Bhubaneswar-751022
Access Control System, CCTV, Rodent Repellant System and Water leakage Detection System
2023_BSNL_163530_1
16/BSNL-EDB/2023-24
Open Tender
Electrical Works
Item Rate
30 days
Bhubaneswar
3 documents required · 3 mandatory
₹590
A O (Cash), BSNL, O/o GMTD, Bhubaneswar.
₹18,370
Yes
31 Aug 2023
5 Aug 2023
14 Aug 2023
5 Aug 2023
12 Aug 2023
5 Aug 2023
5 Aug 2023 - 9 Aug 2023
Amount
SUB-HEAD - I (ACCESS CONTROL SYSTEM)
MAIN ACCESS CONTROL PANEL: Supplying installation testing and commissioning of following Microprocessor based Access controllers for connecting the item such as card readers, Magnetic locks etc. with TCP/ IP Compatibility with suitable size MS powder coated enclosure, power supply units along with PSU, battery charger and minimum 4 hrs. Battery back-up, on-board additional Inputs/Auxiliary outputs and all accessories along with Tamper Protected casing as per the detailed technical specification attached. The Access controllers should be UL listed. The access controller is to be integrated with the analog addressable fire alarm system for operation.
4 Card reader controller (Four door controller)
SMART CARD READERS: Supplying installation testing and commissioning of Smart Card readers with stainless steel base plate with base box i/c door interface module (if applicable), power supply unit etc. The read range shall be up to 125 mm for Doors. The reader log data should be transfer to server on real time basis.
BIOMETRIC FINGER PRINT READER: Supplying installation testing and commissioning of Biometric finger reader having inbuilt smartcard readers with pin pad complete with enclosure, protective cover to avoid scratching and all accessories i/c door interface module (if applicable) , power supply unit etc. as per the detailed technical specification attached for Doors at Server room. The reader log data should be transfer to server on real time basis. The reader should be capable of both enrolment purpose and access control purpose.
FACE RECOGNITION: SITC of face, fingerprint, ID card and password based time attendance Biometric terminal with 2.8" HVGA display, capacity of 1000x face and 10000x fingerprints recognition, database capacity of 200000 storage capacity, identification mode 1:N, 1:1, built-in battery, operating temperature 0 deg to 60deg C, power supply 12V DC
SMART CARDS: Supplying installation testing and commissioning of Smart Cards, double side card holder and lanyard including printing on lanyard
EM-LOCK FOR DOORS: Supplying installation testing and commissioning of Electromagnetic Locks of 600 lbs holding force suitable for operating with 12/24V DC along with power supply and battery backup for 4 hours and Green /Red LED for indication UL listed as per the specification
For single leaf doors
For double leaf doors
Supplying installation testing and commissioning of Exit Switch at the inside of Doors.
Supplying installation testing and commissioning of master switch for opening all access control doors in case of Emergency.
MAGNETIC CONTACT: Supplying installation testing and commissioning of Surface/ flush mounted type Magnetic Contact suitable for 5 million cycle operation etc as required.
ACCESS & SECURITY MANAGEMENT SOFTWARE: Supply & License for Access Control Readers/Doors and Access Control System should be seamlessly Integrated and should have GUI system along with one client license to be installed at operator station.
Supplying and laying of the following size copper flexible cables for connecting reader/lock to controller including interconnections, testing etc., as reqd.
2 core 0.5sqmm
4 core 0.5sqmm
8 core 0.5sqmm
SITC of Desktop PC with Intel core i7 processor, 16GB DDR4 RAM, 1TB storage, 19" monitor, keyboard, mouse, windows 11 operating system including installation, testing, commissioning etc., as reqd.
SUB-HEAD - II (CCTV SURVEILLANCE SYSTEM)
SITC of 16 Channel NVR with support up to 16Ch. third-party IP Camera Input, H.265/H.264 codec decoding, recording up to 8MP resolution, support up to 10TB HDD with 4 SATA interface, HDMI & VGA simultaneous video output, max 160Mbps incoming bandwidth, interface ports 2no RJ45, 2no USB, Power supply 240V AC, Network TCP/IP etc., as required.
Supplying and fixing of unmanaged PoE 8Port Gigabyte switch with 8×Gigabit PoE ports, 2×Gigabit uplink ports, port type RJ45, Max. Power supply 240V AC etc, as required.
Supplying and Fixing of 4MP IR Fixed Dome Network Camera with 1/2.8" Image Sensor, 2.8mm fixed lens, IR range up to 30mtrs, support on board card slot up to 256GB, WDR, video compression H.265/H.264 etc as required.
Supplying and Fixing of 2MP IR Fixed Bullet Network Camera with 1/2.8" Image Sensor, 2.8mm fixed lens, IR range up to 30mtrs, support on board card slot up to 128GB, WDR, video compression H.265/H.264 etc as required.
Supplying and fixing of 3.5" 6TB Hard disk, surveillance grade etc as required.
Supply, laying, and Termination of CAT 6 UTP Cable on surface of wall including making holes in the wall etc as required.
Supply, Installation of 6U Rack with PDU, Fan, Lock & Key arrangement etc as required.
Supply, Installation of 21" LED Monitor on table/ on surface of wall including providing bracket etc as required
Supply, Installation of wireless mouse etc as required.
Supplying and laying of HDMI Cable for connecting monitor to NVR i/c interconnection, testing etc., as reqd.
SUB-HEAD - III (RODENT REPELLANT SYSTEM)
Supplying and fixing of Digital Rodent Repellent Controller/ Console consists of microcontroller and dedicated drivers and capable of driving up to 20 Transducers/ satellites etc as required as per the specifications enclosed.
Supplying and fixing of Transducers/ Satellites suitable to receive signals from the above digital controller and capable of converting them in audible signals etc as required as per the specifications.
Supply and fixing of 20 mm dia rigid PVC conduit medium class on the ceiling using clips/ saddles at suitable intervals, including removing the false ceiling tiles, making suitable arrangement to climb above false ceiling for fixing the pipe making good the damages done to the false ceiling etc., as required.
Supply and drawing 2 core flexible (14/40) SWG multi-stranded copper wires in the existing PVC conduit for connection between controller and transducers etc., as required.
Supply and fixing of MS stand suitable for repellant controller including grouting making good etc., as required.
Supplying and fixing of MS box of size 150mm x 150mm x 40mm, with suitable size MS cover for accommodating transducer including painting the box with approved colour paint, making holes on the cover plate for taking the wires etc., as required.
SUB-HEAD - IV (WATER LEAKAGE DETECTION SYSTEM)
Supplying and fixing of microprocessor based 4zone Water Leak Detection Panel with LED screen for configure, locate and acknowledge leaks, alarm on leak detection including RS485 communication port etc., as reqd.
Supplying and laying of Water leak detection Sensing cable ( 20Mtrs ) including interconnections, testing etc., as reqd.
Supplying and laying of Water leak detection Sensing cable ( 15Mtrs ) including interconnections, testing etc., as reqd.
Electronic Hooter Cum Strobe: Supplying installation testing and commissioning of Hooter having three distinct sounds with addressable relay module and strobe light with minimum 85 db from 1Mtr distance etc. as required.
Supplying and laying of 2 core x 1.5 sqmm armoured FRLS copper cable on surface/recess suitable for operation on 240V, 50Hz AC supplying including interconnections, testing etc., as reqd.
PDR ENGINEERING COMPANY PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .