Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹42.1 L+₹1.2 L (3.03%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.1 L+₹1.3 L (3.12%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTATIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹42.5 L+₹1.6 L (4.03%)Rejected-Finance OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹42.6 L+₹1.7 L (4.13%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO BLDG NO LA 12 AND PROVN OF LBW WORK AND REVENUE WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_546063_1
GE/SEV/28 of 2022-23
Open Tender
Civil Works
Item Rate
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹88,000
Yes
28 Sept 2022
18 Aug 2022
12 Sept 2022
18 Aug 2022
10 Sept 2022
3 Sept 2022
19 Aug 2022 - 19 Aug 2022
Amount
Excavating in trenches not exc 1.50m wide and n.exc 1.50m in depth in hard/dense soil and getting out complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L hardcore of broken stone or boulders of gauge not exceeding 63/100 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 50mm thick PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified and directed.
M&L for 40mm thick PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in DPC to horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L RCC 1:2:4 , type B1, 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No.12 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, and including one coat of red oxide primer complete all as specified.
S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.
S&F mild steel screw bolts, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles on vertical surface 440X350X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and as directed.
M&L for mild steel round bars, 6 mm dia, as in reinforcement to half brick wall (two Nos in every fourth course of half brick wall) complete all as specified and as directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised handles of 100mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S' trap, with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding and connecting up, complete all as specified and directed.
S & F flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F 15 mm dia GI pipe medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S& F 15 mm bore bib tap cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore stop valve cast copper alloy , , fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F 15 mm bore concealed stop valve cast copper alloy , , fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply and fixing CP soap dish fixed to wall with screws complete all as specified.
S&F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S & F 75 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 110 mm bore PVC (SWR) bends, complete all as specified & directed
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
M&L for cement concrete 1:4:8 type D-2 Concrete bed to drain pipes of 110 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size complete all as specified and as directed
S&F Vitreous China wash hand basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply only 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and coloumn in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified and directed.
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured seperately.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
M&L for 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
Cutting existing 15 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Cutting existing 20 mm steel tubing for alternations or additions (each cut measured) complete all as specified and directed.
Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed
All as per item No 67 above but exceeding 1.5m deep and not exc 3.0m in depth getting out in hard/dense soil complete all as specified and directed.
M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone agg) as in foundation, filling and mass concrete complete all as specified.
M&L for Sand filling under floors including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed.
S&F Modular Septic Tank of Capacity 2000 Ltrs (9-10 Users) (plastic septic tank) vertical design tank type includng all accessoried and lowering into position and fixed to inlet and outlet pipes complete all as per manufacturer instructions and directed by Engineer-in-Charge. Make:- Supreme/ Sintex Plastics/ Aqua tech.
All as per item No 1.00 above but depth exc 1.5m n exc 3.00 m complete all as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation, shafts, wells, cesspits, manholes, pier holes, pipes and cables etc n.exc 10 sqm on plan and n exc 1.5 in depth and getting out in soft / loose soil complete all as specified and as directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all specified and directed.
M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all specified and directed.
M&L for brick work with sub class 'B' brick in one & half thick honey comb walling built in cm 1:4 complete all as specified and directed.
M&L for loose filling with broken brick bats of guage 80 to 150 mm in soakge pit/soakge well complete all as specified and as diected.
M&L for cement concrete 1:4:8 type D-2 Concrete bed to drain pipes of 150 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.
S&F 150mm Internal Dia DWCPE pipes (SN-8) pipe ISI Marked laid in trenches and jointed complete all as specified and as directed.
M&L 100mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregated) as in sub base complete all as specified.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and as directed
M&L for chequred cement concrete tiles 30cm30xcmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
M&L for shingle filling in floor or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
M&L for 40mm thick cement concrete 1:2:4, Type B-1 (using 20mm graded crushed stone agg) as in floors finished even and smooth without using extra cement complete all as specified and as directed.
M&L for glass dividing strips 38mm wide and 3 mm thick and inserted in position to conform to design complete all as specified and as directed.
M&L for Formwork for rough finished surfaces tie edges of concrete flats, treads, break in floors window cills, concret railling openings in concrete wall floors and roofs n exc 20 cm wide and sides RCC/PCC bands in walls horizontal or sloping and similar works etc complete all as specified and as directed.
M&L rendering 5mm thick in CM 1: 3 on fair faces of ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed.
M&L for 10mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:3 mixed with water proofing compound @3% of cement, finished even and smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed
Surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed.
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
Excavation over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed
M&L plain cement concrete 1:2:4 type B1 (using 20 mm gradded crushed stone aggregated) as in lintels upto 1.5m clear span and lintel band, roof band, plinth courses string courses, lacing courses, parapets and railling upto 60 cm in height coping, kneelers, apex stones, bed plates, water throughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L for precast reinforcement cement cncrete M-25 (Design Mix) as in cover slabs and similar work includng necessary formwork set in CM 1:4 complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 (using 40 mm graddedcrushed stone aggregated) as in surface channels and drains complete all as specified and as directed.
M&L for cutting channels , grooves or rebates n exc 15 cm grith and trimming surfaces complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bars and refixing in same opening complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles Fe-290 Gde-E-165 complete all as specified and directed.
S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type pre painted non asbestos fibre cement board fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note :- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified
M&L 25mm thick cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base of floors complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Screed base shall be measured and paid seperately.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint (1st quality) complete all as specified and as directed.
M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (Reinforced) complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of walls and applying two coats of exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed
M&L for preparation of new plaster surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting on walls complete all as specified and as directed
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No -120 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 120 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.00 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.00 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No -120 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type LED fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25 w with SPD , IP-66 protection with toughened glass including fixing pipe/saddle complete all as specified and as directed.
S&F decorative box type LED fitting 09 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
S&F in repair PVC ventilation fan AC , single phase, 230/240 V, of size 250mm sweep metal body including making holes on wall & making good the disturbed surfaces with all connecting arrangements complete all as specified and as directed.
Supply and fixing DB with sheet metal enclouser 240 volts,04 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, SP, 10 KA, 230 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
S&F MCB, DP, 10 KA, 415 V. "C" curve, 06-32 A , ISI marked complete all as specified and directed
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 6 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 25mm bore light grade for cable protection complete all as specified and as directed.
Cutting & screwing existing water pipe line mains 20mm bore and connection with new pipe line laid including necessary fitting required at site complete all as specified and as directed.
Supply & laying in trenches GI pipe 20mm bore medium grade including fittings in trenches complete all as specified.
Supply & laying in trenches GI pipe 25mm bore medium grade including fittings in trenches complete all as specified.
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
M&L for Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.
M&L for Socket outlet 3 pin, 5 Amps flush type universal, 240 volts complete all as specified and as directed.
S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watt complete all as specified and as directed.
S&F energy efficient , 5 star rated BLDC ceiling fan 230V 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed including taking down and deposited in MES store yard.
Supply and fixing DB with sheet metal enclouser 240 volts, 12 way with rated bus bar single pole & neutral double door for MCB, including cutting chases for DB of required size and making good disturbed surface area and putting blanking plate if required including taking down old unserviceable one complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core including making necessary connections all as specified and directed.
Supply and fixing GI pipe 40mm bore light grade for cable protection complete all as specified and as directed.
Supply and fixing gun metal gate vlave iron wheel head screwed both ends for iron pipes of size 20mm all as directed.
NARESH GUPTA
M/s. STRUCTURES INDIA
AJOY PAUL
SRI SURAJIT SENGUPTA
M S ALOK SAHA
M S BHARAT CONSTRUCTION CO.
MARWA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .