ADDITION/ALTERATION OF SCIENCE AND IT LABS OF AF SCHOOL, SPECIAL REPAIRS TO LT UG CABLE, JUNCTION BOX AND CONNECTED WORKS AT TECHNICAL AREA AND REPLACEMENT OF HIGH BAY LIGHT AT A AND B DISPERSAL HANGERS UNDER GE (AF) HASIMARA

Amount

Taking down chowkat with shutter, exc 1.5 Sqm & n.exc. 4 Sqm in each (without taking off shutter from the frame), complete all as specified and directed.

Taking down shutter of any description, exc 1 & n.exc. 2 Sqm in each, complete all as specified and directed.

Dismantling structural steel work including doors, gates, but excluding framed truss etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 including provision of 02 Nos 8mm TMT bars at every fourth course, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, complete all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, mixed with liquid water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3, and finished the surface even and smooth without using extra cement as in ceiling complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completecomplete all as specified and directed.

S & F factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side having one side feathered edge and other side 10mm, 900 bent edge & as gap insert for top rail & bottom rail, panel shall be of wire gauzed, The wire gauzed shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube, the wire gauge shall be stretched to tighten firmly complete as per specification and drawing and as directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm.)

S & F powder coated (minimum 15 micron aluminium anodised door comprising of frame of size 101.60mmx44.6mmx2.4mm thick push/pull type glazed door shutter having top and bottom section83x44.5x2.4mm and 100x44.5x2.4mm thick respectively, styles section 80x44.5x2.4mm thick and lock rail of size 100mmx44.5mmx2.4mm thick including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size including 5mm thick tinted sheet glass in both panel, hinges, mortice lock, stays & aluminium anodised handle of suitable size, etc complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specifed and directed.

S & F door closer hydraulically regulated, destination No. 03, universal type, suitable for door shutters of 851 & 1000mm in width of aluminium (Die cast) body, complete all as specifed and directed.

S & F 5mm thick ACP sheet in panels of Aluminium door exc.0.5 Sqm in each pane with rubber beading, complete all as specifed and directed.

S & F aluminium mortice lock with 4 levers, verticle type, size 75mm, complete all as specifed and directed.

S & F 5.5 mm thick, tinted glass and glazing for Aluminium door/windows exc.0.5 Sqm in each pane with neoprine rubber beading, complete all as specifed and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

M & L for Plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses ,parpets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water thoughs and including weathering, slightly rounded or chambered angles and throating, complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs etc, also splays between floors and beams etc and finished rough surfaces of concrete, complete all as specifed and directed

M & L for TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M & L for TMT bars 6mm to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note : Reinforcement shall be measured & paid seperately)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for granite stone slab (of any type) as in floor, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed.

M & L for granite stone slab (of any type) as in in skirting/dado, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick rendering in cement mortor 1:4 & cutting, polishing complete all as specified and directed.

M & L for joint free non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 50 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of white wash on old decorated surfaces of ceiling, soffits of slabs, chajja etc including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and flurocent salts and trading oil and greasing spots, complete all as spefied and directed.

M & L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces, complete all as spefied and directed.

M & L for preparation of old decorated surfaces of walls by complete removal of existing treatment complete all as specified and directed.

M & L for applying 1.5mm thick wall care putty to achieve a smooth surface including preparation of surface complete all as specified and directed.

M & L for preparing old plastered surfaces of internal walls, etc and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of old decorated streel surfaces, over 10 cm in width or girth and applying one coat of synthetic enamel paint (1st graded quality) complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zine chrome primer complete all as specified and directed.

M & L for two coats of plastic emulsion paint on newly plastered surfaces of walls of any description over 10 cm in width or girth complete all as specified and directed.

M & L for one coat of plastic emulsion paint on old surfaces of walls of any description over 10 cm in width or girth including preparation of surface complete all as specified and directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron works, new or old of any description and girth treating ends of posts, back of chowkats etc, area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each with tar or coal tar black paint complete all as specified and as directed.

S & F 150 mm long, aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed.

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 47 above)

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

S & F 15mm bore, concealed Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and making good surfaces with cement morter 1:3 exc 10 cm girth, complete all as specified and directed.

M & L for 15mm bore, Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning for re-fixing or removing from site, complete all as specied and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 52 above)

S & F ceramic china, table top wash hand basin, size 530x350x130mm(placed over platform like granite/marble) including PVC waste pipe 32mm dia, waste coupling and cutting hole on platform as required complete all as specified and directed. (Make: Prayag Cat No 4707 or equivalent)

S & F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 32/40mm bore flexible PVC waste pipe for urinal/WHB with one end with socket complete all as specified and directed

S & F 15mm bore,Swan neck, pillar tap, chromium plated, fancy type, suitable for table top wash hand basin complete all as specified and directed.

S & F 15 mm bore, angular stop cock, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Soap dish, brass chromium plated, fancy type, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.

S & F 15mm bore, long body bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 18mm thick, prelaminated wooden finish, PVC celuka board for shelves of cupboard etc including all necessary accessories and builders hardware, complete all as specified and directed.

S & F 12mm thick, prelaminated wooden finish, PVC celuka board for shelves of cupboard etc including all necessary accessories and builder hardware, complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F 75mm Aluminium anodised, hasp and staple, safety type and fixed with screws, complete all as specified and directed.

S & F Internal, auto closing, concealed aluminium hinge (dia of hinge 35 mm, cup hole distance 48mm for 18-22 mm thick door), complete all as specified and directed.

S & F 125mm 'D' shaped Economy Handle, fancy type complete all as specified and directed.

S & F good quality stainless steel, telescopic channel set for drawer of grocery basket, heavy duty drawer, multi-tech high capacity, 500mm long (min) for cutlery plain and thali basket, complete all as specified and directed.

S & F Brass knobs 35-40mm dia, complete all as specified and directed.

S & F mild steel continuous piano hinges, bright finishes, width of flaps 30mm(when open) complete all as specified and directed.

S & F 150 mm length(overall) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Demolition and breaking up 100/75mm drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S & F 75mm dia , PVC rain water pipes, single socketed in any length wih rubber ring joints fixed to wall including necessary MS flat iron clamps of size (40x4mm), complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed.

S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 75mm dia, PVC (SWR) floor tap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S & F 20 mm bore, gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed.

M & L for 50mm bore HDPE pressure pipe of rating 6 Kg/cm2 fixed to wall, ceiling or laid in floors etc. complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and laying 50mm dia, double walled corrugated(DWC) HDPE duct pipe for cable protection, conforming to IS, of approved colour with fittings complete all as specified and directed.

M & L for 100 mm bore, steel tubes, galvanised, light grade with all fittings, laid in trenches/road crossing/drain etc as in cable protection including taking up or down existing pipe complete all as specified and directed.

M & L for 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in trenches/road crossing/drain etc as in cable protection including taking up or down existing pipe complete all as specified and directed.

Taking out/down unserviceable UG cable from trenches/walls/poles etc.of any size after disconnecting the same, including bricks, GI pipes etc of any description complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)

All as per serial item No. 87 above but for 35 Sqmm 4 core cable complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)

All as per serial item No. 87 above but for 25 Sqmm 4 core cable complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)

M & L for boring of horizontally holes by trenchless technology using ultra sound technique and necessary machinaries including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure under road below 1 metre from the road surface without damaging the exsting road, getting out and disposal of excavated soil, etc to a distance not exc. 50 meter from the site of work complete all as directed by Engineer in charge.

M & L for cable route indicator made out of CI, 15 cm dia disc shaped with embossed letter (LT Cable), fixed to MS angle iron 40 x 40 x 5mm and 1 Mtr long embeded in ground with 25 x 250 x 200mm PCC 1:3:6, type C1 using 20 mm graded stone aggregate complete all as specified and directed.

Supply, installation, testing and commissioning factory fabricated feeder pillar (outdoor type) weather dust and vermin proof fabricated out of 3.15 mm thick CRCA steel sheet outer portion AC 415 volts, 50 HZ of size 600 mm x 400 mm x 300 mm mounted on PCC foundation and inner portion of size 2.0 mm thick suitable size of MS channel supports and with suitable size of angle iron legs for grouting steel sheet powder coated paint internally & externally and locking arrangement including all incoming and outgoing connection with suitable size of lugs and glands and dismantling existing unserviceable panel with and including the following complete all as specified and directed.:- (a) 04 Nos aluminium busbar 3 phase 4 wire of rating 200 amps for phase and neutral.

M & L for Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-1 cover slab (reinforced with 8 mm dia TMT bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one, complete all as specified and as directed by the Engineer-in-Charge.

M & L for Sub main wiring with two runs of 4 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC conduits/casing-caping of suitable size, fixed to wall/ceiling etc including 4 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length.)

S & F Switch socket combination 2 in 1, 6 pin, 6/16 Amps, flush type, 240 volts complete all as specified and directed.

S & F Ceiling rose, 3 Terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

S & F in replacement LED Highbay light new generation with high luminous efficacy upto > 150 LPW, IP 66 protected, front toughtened glass with discrete high lumen LED, suitable driver and hanging arrangement into hanger including flexible copper wire 3 core 2.5 Sqmm PVC insulated complete all as specified and directed. (Make : Havells cat part No ENDURAHIBRITEPLUSHBP150WLED765P60DTOLENS / Surya / Crompton Greaves or equivalent)

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 Volts suitable for housing MCBs complete all as specified and directed. (Make : Legrand, Cat No. 5076 11 or equivalent model as approved)

S&F VTPN prewired distribution board TPN-DPX 160 MCCB including one No MCCB 160 Amps as incomer and 12 Nos 63 Amp MCB as outgoing, double door type, sheet metal enclosure, 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link with provision of 63 Amp MCBs, 12 Nos with blank plate suitable for 4 way complete all as specified and as directed by Engineer-in-Charge. (Make: Legrand IP-54-IK-09 Cat No. 5077 50 or equivalent in Schneider/ABB/L & T) Note : Rates of MCCB 160 Amp and MCB included in the quoted rates.

S & F MCB, SPN, 240 Volts, 6-32 Amps, 'C' series, 10KA capacity complete all as specified and directed. (Make: Legrand Cat No. 4086 09-17 or equivelant of make as per list of manufacturer)

S & F MCB, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity, 240 Volts complete all as specified and directed. (Make: Legrand Cat No. 4085 87-95 or equivelant of make as per list of manufacturer)

M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-1 cover slab (reinforced with 8 mm dia TMT bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately)

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including stove enamelled steel conduit (medium grade) of suitable size with all fittings and accessories (like Tee, bend etc.) and cutting chases for conduits complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3mm thick plastic laminated cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and directed by the Engr-in-Charge.

All as per item No.106 above but one 5 Amps 3/5 pin switch socket outlet on the same board with other switches complete all as specified and directed.

All as per item No. 106 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/15 Amps Switch socket combination on Independent board complete all as specified and directed.

All as per item No. 106 above but one 5 Amps 3/5 pin, Switch socket combination on independent board complete all as specified and directed.

S & F switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed.

S & F socket outlet, 5 Amps, flush type, 240 volts complete all as specified and directed.

S & F switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed.

S & F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including complete all as specified and directed.

S & F bell push, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Stepped type electronic fan regulator flush type complete all as specified and directed. (Make: Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

S & F wall mounted 20W LED light fittings(4' long), natural white including warm white LED tube rod with extruded thermally conductive materials, 6000K and connecting up complete all as specified and directed. (Make : Havells Cat No. ENDURALINEARNEOBS20WLED830SPCWH or equivalent model of make as specified in list of manufacturer).

S & F Exhaust fan, heavy duty, 380 mm sweep, 1400 rpm, AC, single phase 230/240 volts complete with all accessories and electric connection including making suitable hole on wall by cutting existing wall and making good the disturbed surface to match with the existing complete all as specified and directed (Make : Crompton Greaves/Bajaj/Usha/ Havells/Orient as approved)

M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC conduits/casing-caping of suitable size, fixed to wall/ceiling etc including 6 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length.) Note: An amount of Rs. 52406.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ASHOK ENTERPRISE

M/S. NARENDRA KUMAR GARG

MAJUMDER ENTERPRISE

M/S SARDAR MAL NAHATA

JOGINDER KUMAR GOYEL

M/S ANIL KUMAR BAUL

M/S DEY ENTERPRISE