Repair to R.W Section Office-I Building at Nuagada for the year 2026-27_Building

Earth work excavation in ordinary soil in road embankment with all leads and lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 (1’-0”) in depth with all labour, Cess and T&P etc. complete in all respect as per specification and direction of Engineer-In-Charge.

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge.

Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. Foundation

12mm (1/2") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess etc, complete in all floors as per direction of Engineer-in-charge.

Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance of all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Supply of HYSD bars confirming to grade S-415 cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance &of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge.

Priming two coat with any approved primer over iron work including cost of primerwithsand papering, polishing the surface in all respectwith cost, conveyance andof all materials and labour with T&P and Cess required for the work etc. complete in all respect as per direction of Engineer-in-Charge.