SPL REPAIR OF BLDG NO NP-04 AT VRG LINE COD KANPUR UNDER GE (I) KANPUR

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed.

Taking down chowkats (without taking off shutter from chowkats) area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutter of 2nd class hard (Hollock) prepared to receive gauge/glass (without sash bars ) fixed with mitred beeds and securing glass gauge etc sizes of members of shutter as specified in SSR part-1 section-8, clause 8.24(a) complete all as specified and directed.

S&F 35 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

M&L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet, almirah shutter including side lipping etc complete all as specified and directed.

All as per item No 9.00 above but in shelf and partition etc complete all as specified and directed.

M&L 100mm size stainless steel hinges auto close type complete all as specified and directed.

M&L 125mm size stainless steel handles complete all as specified and directed.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed. Note : 3mm plain sheet glass panes shall be deemed to be included in this item.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed. Note: 0.45mm nominal dia of wire mesh and aperature 1.40mm shall be deemed to be included in this item.

S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed. Note: 3mm frosted / pin headed sheet glass panes shall be deemed to be included in this item.

S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed. Note: 0.45mm nominal dia of wire mesh and aperature 1.40mm shall be deemed to be included in this item.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified and directed.

M&L for 4mm thick pin headed sheet glass and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified and directed.

S& F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S& F in repair galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L solid PVC frame (single rebated) of size 60 mmx 30 mm made out of solid pvc foam with homogenous fine cellular structure having smmoth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete as per specification & drawing. Make : Rajshri Plastiwood/Sintex as approved by GE(I).

S&F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws complete all as specified and directed.

S&F 75mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws complete all as specified and directed.

S&F 200mm long barrel tower bolt of aluminium extruded section complete all as specified and directed.

S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified and directed.

S&F 100mm long handle of aluminium extruded section fabricated anodized typecomplete all as specified and directed.

S&F 125 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 125 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section & fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F 150mm floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 300mm mild steel, ordinary rat -tail rod pattern spring including roller and roller plate complete and all as specified and directed.

S&F PVC handle 150mm size complete all as specified and directed.

S&F PVC but hinges 100mm size complete all as specified and directed.

S&F PVC tower bolt 150mm size complete all as specified and directed.

S&F in repairs 25 mm dia MS powder coated decorative finish conduit as in curtain rod and fixed to brackets complete all as specified and directed.

S&F in replacement MS brackets suitable for 25mm dia cutain rod fixed with screw and gutties in wall as approved complete all as specified and directed.

Dismantiling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractoron this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly.

M&L for Mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed) complete all as specified and directed.

M&L for welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed.

Demolition brick tile/cement concrete tiles / APP membrance by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in padding, coping, roof kerb incl hunching, benching etc complete all as specified and directed.

M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces/roof top mixed with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note : Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instructions complete all as specified and directed. Note : 1. The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.

Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all complete all as specified and directed. (Note : Debris obtained from dismantling will be dispossed off as directed)

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed. (Note : Debris obtained from demolition will be dispossed off as directed)

Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

Cutting openings, through cement mortar brick walls for door, window/ventilar and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, kerbs, filling for fixing of hold fast etc including necessary formwork etc complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 58 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.

M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed.

Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even and smooth complete all complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide & over and incluidng 10cm width or girth complete all complete all as specified and directed.

M&L for preparation of new wooden surfaces width or girth exc 10 cm and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified .

M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed 20mm bore complete all complete all as specified and directed.

S&F 15mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1 mm thick stainless steel sheet for kitchen and fixed with plugs, washers and waste pipe including fixing on cast iron cantilever brackets and connecting union to pipe over all size 1000 x 510 mm and bowl size 460x410x200 mm complete all as specified and directed.

S&F plate rack made out of 1mm thick stainless steel of size 750 mm x 650 mmx 250 mm fixed to wall with chromium plated brass spacers 30 to 50mm size, including all internal fittings of plate rack complete all as specified and directed.

S&F in repair vitreous china WHB white flate back size 550x400mm complete all as specified and directed.

S&F 600 mm x 450 mm bevelled edge mirror, mounted on 6 mm thick plywood and fitted to wooden plugs with CP brass screws and cup screws including taking down old unserviceable mirror complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed.

S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets, incl PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length incl taking out of existing flushing cisterns complete all as specified and directed.

S&F in repairs Chromium plated brass soap dish/ tray fixed with wall complete all as specified and directed.

S&F in repair 15mm bore CP fancy type long body bib tap with capstan head complete all as specified and directed including flange.

S&F in repair 15mm bore CP fancy type short body bib tap with capstan head complete all as specified and directed including flange.

S&F in repair stop valve concealed type 15mm bore of cast copper alloy,fancy type of CP with long shank and cup,high pressure screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

S&F in repair Angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F in repairs pillar taps fancy type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair brass chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.

S&F stainless steel gratings suitable for 100 mm floor trap complete all as specified and direcred.

S&F stainless steel gratings suitable for 75 mm floor trap complete all as specified and direcred.

S&F PVC waste pipe 32/40mm dia suitable for Sink/Urinal etc complete all as specified and directed.

S&F in repair PVC connection 450mm long brass chucknut bolt ends for fixing 15mm dia pipe complete all as specified and directed.

Dismantling of 75 to 100 mm dia cast iron or reinforced concrete drain pipes incl bends etc, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in floor/trenches or in floors complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent sand cast pipes in any length with or without ears, with cement joints, laid in floor/trenches complete all as specified and directed.

S&F 75 mm bore cast iron soil waste & vent sand cast pipe in any length with or without ears, with cement joints, fixed on walls with MS flat iron clamps size 50 x 6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent sand cast pipe in any length with or without ears, with cement joints, fixed on walls with MS flat iron clamps size 50 x 6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F 75 mm bore cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron bend (any radius) diminishing pieces or tapers ( larger bore measured) complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal ), ordinary or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed.

M&L in repairs PVC (SWR) floor trap 75 mm outer dia, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs cast iron tee for 110 mm bore pipe complete all as specified and directed.

S&F in repair 100mm bore cast iron vent cowl complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dully for following:- a). One light point controlled by one 05 Amps switch.

All as per item No 116 above but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

All as per item No. 116 above but One socket out multi pin 5 Amps controlled by one switch on independant board complete all as specified and directed.

All as per item No. 116 above but One socket out multi pin 5 Amps controlled by one switch on same board complete all as specified and directed.

All as per item No. 116 above but for bone light point controlled by 02 nos two way switches complete all as specified and directed.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed.

Switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed.

S&F modular bell push 6 A 1 module 230 volts complete all as specified and directed.

M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed.

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed.

S&F modular switch 2 way 6 A 6 A 1 module 230 volts complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, Modular step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

All as per item No 128 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F for Bell Electric heavy duty DING DONG Type 230 volts single pole complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

Supply and fixing Emergency LED Lamp solution gets Autometically switched on during a power cut and runs effictively on 04 hours power factor more than 0.9 protection glass IP 20 bulbs 12 watt complete all as specified and directed.

Supply and fixing Internal side LED LAMPS Come with an advanced lighting solution that offers more brightness and saves 80% more energy than than the tradiotational incandascent Power factor more than 0.9 protection glass IP 20 bulbs 12 watt complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

Supply and fixing 10W surface mounted IP65 Bulkhead with system efficiency of 100LM/Watt LED bulk head shall be made up of Die cast PVC housing for better heat decapitation.P.F>.95with THD <10%,surge protection 4KV input voltage rane 150Vto 270V including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED Tube Mirror light & fitting 10/12 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

S&F in replacement wall security light fitting energy saving & environmental frindely long life versatile pressure die cost aluminimum IP-66 road way luminaries with high power LED as a light sourse with toughened glass of 25W LED fittings alongwith Gl bracket made out of GI pipe 25 mm dia medium grade of 0.75 mtr length including 02 Nos. 25x3 mm flat iron clamps grouted on walls and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F vertical distribution board TPN 4 way with including fixing of MCCB 100 A, four pole 26 KA as incomer, shrouded neutral bar & pan assembly with flexible connecting link and MCB SP (5-30 A)-12 Nos as out going complete all as specified and directed. Note:- The cost of MCCB and shall deemed to be included in unit cost.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection with acrylic cover single phase 240 volts 8 way, including suitable size copper bus bar and neutral link of make Legrand or equivalent of make Havells/L&T fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L MCB single pole 240 volts 6-32 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

M&L MCB single pole and Neutral 240 volts 40 to 63 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts, complete with one single pole MCB of 25 amps earthing complete all as specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc.

Supply & Fixing in replecement Exhaust fan steel Body AC Single phase 230 volt size 300 mm Sweep with blades and frames and louvers and writing MES no in Black synthetic enamel paint including cutting of walls, drilling etc complete all as specified and directed.

Supply & Fixing in replecement Fresh Air fan plastic Body AC Single phase 230 volt size 250 mm Sweep with blades and frames and louvers and writing MES no in Black synthetic enamel paint including cutting of walls, drilling etc complete all as specified and directed.

Disconnecting & taking down upto 1200m sweep ceiling fan and deposited to MES store yard and Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and directed. Note : (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor. (c) T & P will be provided by the contractor for reaching any height of the ceiling.

In replcement supply, laying in trenches or passing through pipe/ducts, fixed to wall or poles XLPE insulated screened PVC sheathed galvanized steel strip or wire armoured electric power cable with alumn conductor 1100 volt grade cross sectional area of 35 SQMM 3.5 Core size suitable for earthed system including testing and commissioning complete all as specified and directed. Note : (Excavation and earth work, sand cushioning brick covers a etc shall be measured and paid separately.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

M&L in replacement of Earthing with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed incl testing on competion incliding excavation work and site clearance complete all as specified and directed.

Taking UP or Down steel tubing and connections including cleaning for removal to store 25 mm in size complete and all complete all as specified and directed.

Supply and laying galvanised iron medium grade pipe including fitting and fixtures comlete all as specified and directed

Supply and Fix Gun Metal glove or gate valve with Iron Wheel head screenboth ends for iron pipe and fixed screwed both ends for iron pipe or for unions and fixed size 25 mm dia complete all as specified and directed.

Please Enable Macros to View BoQ information