Maintenance and Repair of Drum MS Gates Iron Chain Swing and Renovation of Rooms Adjacent to Toilet in Phase III of Rock Garden Chandigarh

Providing and fixing new iron 10 mm thick chains to swings, with iron rings complete fixed in position to th entire satisfaction of Engineer in Charge. N.S.

Providing and fixing of sheesham wood pattas for jhullas of approx dimensions 2'-6"x 10"x2" by providing 2 Nos. MS Flat clump of size 35mm x 6mm sporting with 12mm thick round bar hooks (L-type) with the both side of wooden pattas existing jhullas as per site conditions in all respect to the entire satisfaction of Engineer in Charge. N.S.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of nominal thickness 4 mm. DSR 14.5.1

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm. DSR 11.41A.1.1

Providing and fixing 2mm Thick Polycarbonate Sheet to be fixed on the existing MS frame with Self drilling Screws complete in all respect to the entire Satisfaction of Engineer in Charge.N.S.

Providing and fixing 12mm thick toughened glass in the stairs railing/ Glazing in ss section of approved brand and manufacture , including providing and fixing top & bottom pivot &spring type fixing arrangement and making necessary holes etc for fixing required fitting, all complete as per direction of engineer in charge. N.S.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. DSR 16.9

Providing and fixing special type gate consisting frame of M.S. Channel 100 X 50 mm with vertical member & empty drum of bitumen. The intermediate channels are covered with M.S. sheet 7" wide. Double leaf frame is fixed with Pivot/Bush type hinge and angle size 75X75X10 mm and 50X50X6 mm and provided with guide rail of M.S. flat 63mm and 12m with 16mm dia bar on top of flat, machine made guide grove wheel 5" dia and 2" thick. It also include Ist quality painting two coat including Primer coat complete in all respect and to the entire satisfaction of the Engineer-in-charge. N.S.