Renovation of Electrical installation in various Offices at Office of CGMT UP East,Hazratganj Lucknow

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. © 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

SITC of 4'-20 watt LED fitiing complete directly on ceiling/wall i/c connection with 1.5 sq. mm copper conductor single core cable etc. as reqd.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of following way TPNSDFU Switch in sheet steel enclosure alongwith 3nos HRC Fuses i/c grouting and fixing with nuts and bolts i/c connection, testing and commissioning etc. as reqd. (make:-HPL/Havells/L&T or S/S make). (a) 125 AMP TPNSDFU Switch with 3nos 125 amp HRC Fuses

Supplying and fixing of following way TPNSDFU Switch in sheet steel enclosure alongwith 3nos HRC Fuses i/c grouting and fixing with nuts and bolts i/c connection, testing and commissioning etc. as reqd. (make:-HPL/Havells/L&T or S/S make). (b) 200 AMP TPNSDFU Switch with 3nos 200 amp HRC Fuses

Supplying and fixing of following way TPNSDFU Switch in sheet steel enclosure alongwith 3nos HRC Fuses i/c grouting and fixing with nuts and bolts i/c connection, testing and commissioning etc. as reqd. (make:-HPL/Havells/L&T or S/S make). © 250 AMP TPNSDFU Switch with 3nos 250 amp HRC Fuses

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required. (a) Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required. (b) Triple pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (a) 100 A, 16 KA,TPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 6 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). (a) 4 way (4 + 12), Double door

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 100A FP Isolator

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (b) 40A DP Isolator

Dismantling of old and damaged aluminum batten wiring i/c PVC holder.CR, wooden switch board,5A/15A switches,5/15A sockets, DB,MCB's etc complete as reqd. Note: Dismantled material shall be handed over to telecom authorities.)

Servicing of existing of ceiling fan / wall mounted fan / 300 mm Ex. fan ,oiling, greasing , connection & testing etc as reqd

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a)3 Module (100mmX75mm) (for Computer)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (b) 4 Module (125mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 15/16 A switch)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(b) 6 pin 15/16 A socket outlet

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium Conductor armoured power cable of 1.1 KV grade of following size on wall surface as required. (a) 4 X 16Sq. mm Al. Condr. Cable

Supplying and fixing of one number PVC insulated and PVC sheathed / XLPE Aluminium Conductor armoured power cable of 1.1 KV grade of following size on wall surface as required. (b) 2 X 10Sq. mm Al. Condr. Cable

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply and making end termination with brass compression gland and al. lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium Conductor 1.1 grade as reqd.(a) 4x16sqmm

Supply and making end termination with brass compression gland and al. lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium Conductor 1.1 grade as reqd.(b) 2x10 sqmm

SITC of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of following items including making connection etc. as required. (a) Modular Electronic Fan Regulator

Supplying and fixing of following items including making connection etc. as required.(b) 5/6 A switch (For computer)

Supplying and fixing of following items including making connection etc. as required.(c) 3 pin 5/6 A socket outlet