Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹30.4 L+₹3.6 L (13.2%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L2 | Rejected-Finance Not being a
lowest
tenderer | |
| 3 | L3₹31.2 L+₹4.3 L (16.1%)Rejected-Finance VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L3 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
28 Oct 2022, 6:00 pmClosed
GE BABINA
GE BABINA CANTT 284401
REPAIR/REPLACEMENT WORK TO ELECTRIC GEYSERS, SOLAR WATER HEATERS, FITTINGS, EARTHING AND CONNECTED INTERNAL ELECTRIC E/M ITEMS UNDER GE BABINA CANTT
2022_MES_555176_1
GE/BAB/TOKEN/43 OF 2022-2023
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹70,000
Yes
17 Nov 2022
29 Sept 2022
1 Nov 2022
29 Sept 2022
28 Oct 2022
14 Oct 2022
Amount
Taking down, dismantling / unscrewing electric water heater (Geyser) for repair / servicing and refixing after repair reconnecting of electrical and water supply and testing with water pressure complete as specified and as directed. Note : If required to deposit unserviceable water heater to AGE (E/M) yard and collection serviceable against replacement from AGE (E/M) yard is responsibility of contractor)
S & F in repair heating element 1.5 KW, Triangle type ISI marked of any type copper sheathed and nickel plated of suitable size for geyser complete all as specified and as directed .
S & F in repair heating element 1.5 KW, square type ISI marked of any type copper sheathed and nickel plated of suitable size for geyser complete all as specified and as directed
S & F in repair heating element 1.5 KW watt,Porcelain type ISI marked for DITZ type geyser complete all as specified and as directed.
S & F in repair heating element 2 KW , Triangle type ISI marked of any type copper sheathed and nickel plated of suitable size for geyser complete all as specified and as directed .
S & F in repair heating element 2 KW ,Square type ISI marked of any type copper sheathed and nickel plated of suitable size for geyser complete all as specified and as directed.
S & F in repair Solar heating element thread type 3000 W for 500 Ltr Solar System,( As per sample) ISI marked of any type copper sheathed and nickel plated of suitable size complete all as specified and as directed .
S & F in repair Solar heating element thread type 2000 W for 200 to 300 Ltr Solar System,( As per sample) ISI marked of any type copper sheathed and nickel plated of suitable size complete all as specified and as directed .
S & F in repair Solar heating element thread type 1500 W for 200 to 300 Ltr Solar System,( As per sample) ISI marked of any type copper sheathed and nickel plated of suitable size complete all as specified and as directed .
S & F in repair Solar heating element thread type 1000 W for 500 Ltr Solar System, ( As per sample) ISI marked of any type copper sheathed and nickel plated of suitable size complete all as specified and as directed .
S & F in repair fusible plug having melting point 90 degreeC 100 degree (as per sample) complete all as specified and as directed.
S & F in repair safety valve dead weight type for 25 Ltr geyser (As per sample) complete all as specified and as directed.
S & F in repair safety valve dead weight type for 50 Ltr geyser(As per sample) complete all as specified and as directed.
S & F in repair glass wool for geyser complete all as specified and as directed.
S & F in repair base plate assembly complete with rubber gasket/packing suitable for water heater (geyser) for 25 litre capacity any make complete all as specified and as directed.
S & F in repair base plate assembly complete with rubber packing suitable for water heater (geyser) for 50 Ltr any make capacity complete all as specified and as directed
S&F in repair outer body cover of steel duly white color painted suitable for 25 Ltr capacity of geyser as per sample or existing size, complete all as directed
S&F in repair outer body cover of steel duly white color painted suitable for 50 Ltr capacity of geyser as per sample or existing size, complete all as directed
S & F in repair thermostate suitable for 25 Ltr water heater(Geyser) of any make ranging from 5 degreecentigrade to 75 degree centigrade including making electric connection complete all as specified and as directed.
S & F in repair thermostate suitable for 50 Ltr water heater(Geyser) of any make ranging from 5 degreecentigrade to 75 degree centigrade including making electric connection complete all as specified and as directed.
S & F in repair geyser base assembly for 25 Ltr capacity geyser Triangle type / Square type ( As per sample ) with rubber packing complete all as specified and as directed.
All as per item Sr No 21 above but for geyser of capacity 50 ltrs all as specified and directed.
S & F in repair PVC connection pipe 15mm dia of 450mm long with check nuts on both end with rubber washer complete all as specified and as directed.
S & F in repair PVC insulated flexible cable 3 core with standed copper conductor of size 2.5 Sqmm against unserviceable flexible cable complete all as specified and as directed.
S & F in repair PVC insulated flexible cable 3 core with standed copper conductor of size 4.00 Sqmm against unserviceable flexible cable complete all as specified and as directed.
Supply and fixing in replacement of 200 Ltr capacity of steel tank water storage tank ISI marked, cylindrical vertical with closed top hoisting and fixing in position including 20mm GI pipe medium grade incoming or out going pipe connections including tank with covered aluminium sheet with glass wool including dismantling of existing water tanks of any type and capacity exceeding 200 Ltr complete all as directed
Supply and fixing in replacement of 300 Ltr capacity of steel tank of solar heater water storage tank ISI marked, cylindrical vertical with closed top hoisting and fixing in position including 20mm GI pipe medium grade incoming or out going pipe connections including tank with covered aluminium sheet with glass wool including dismantling of existing water tanks of any type and capacity exceeding 300 Ltr complete all as directed
S& F in repair non return valve 15 mm dia bore cast copper alloy screwed for iron pipe or brass ferrule complete all as specified and as directed.
S& F plug top for geyser 20 Amps ISI marked type complete all as specified and as directed.
S&F storage type water heater (Geyser), 230 Volt AC, 25 Ltrs capacity with comprising polycarbonate body steel inner tank, suitable heating element, thermostate with adjustable temperature stting 0-90 C, indication lamps provision ofr inlet outlet and air vent connections & NRV, PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long mounteted on wall surfaces including all fixing arrangement such s faster bolts, nuts washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed by Engr-in-charge.
All as per item Sr No 30 above but geyser of capacoty 50 Ltrs all as specified and directed.
S & F repair neon lamp indicator red / green rectangular / round type, complete all as specified and as directed.
Supply & fixing GI nut bolts any type any size as per site requerment all as directed
M & L insulation for hot water worn out insulation 15mm dia GI pipe, medium grade for solar water heater system complete all as specified and as directed.
M & L for taking out and brazing/welding of copper/steel inner tanks of 25 ltr capacity of geyser and testing complete all as specified and as directed.
M & L for brazing/welding of copper/ steel inner tanks of 50 ltr capacity of geyser and testing complete all as specified and as directed.
S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20 Amp capacity with alignment 10 KA ‘C’ series complete all as specified and as directed.
Suppling and fixing in replacement of Gun metal gate valve 15 mm bore with all GI fitting as per existing all as specified and directed
Suppling and fixing in replacement of Gun metal gate valve 20 mm bore with all GI fitting as per existing all as specified and directed
S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection one twin core cable flat or circular of size 10 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.
All as per item Sr No 40 above but cable of size 6 sqmm all as specified and directed.
Supply and fixing in replacement of 500 ltr capacity of rotational moulded polyethylene water storage tank for solar water heater 2 layered construction ISI marked BLACK cylindrical vertical with closed top, hoisting and fixing in position including 20mm bore GI pipe medium grade wash out pipe 450 mm long with and 20mm dia GI pipe medium grade over flow pipe 600mm long with fitting including dismantling of existing water tanks of any type and capacity complete all as directed.
S& F 20 mm bore GI tubing, medium grade fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc including taking down existing GI tubing including making good disturbed surface complete all as specified and directed.
S& F 15 mm bore GI tubing, medium grade fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc including taking down existing GI tubing including making good of existing surface complete all as specified and directed.
Supply and fixing in replacement of solar plate collector for solar water heater as per existing complete with rubber packing with solar panel glass ( As per sample ) complete all as directed. Note :- The rates shall be deemed to be included for all materials or manpower required which are otherwise not specifed in the discription but are requred to ensure proper installation commissioning and operation of soler water heater system as directed at site
Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.
Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for Modular concealed point wiring one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with modular MS terminal boxes (not less than 1.6 mm thick) including earth dolly with modular frame plates with matching cover plates all modules including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed for the following. Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.
All as per Srl item No.49 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator.
All as per Srl item No.49 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on independent board.
All as per Srl item No.49 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on same board.
All as per Srl item No.49 above but one bell / buzzer point controlled by one modular bell switch
Description all as per item No 49 above but power point with modular MS Terminal Box (not less than 1.6mm thick) complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 2.5 sqmm single core multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with for 3/6 pin 15 Amp modular socket outlet 2 module controlled by one modular switch on independent board with and including 1.50 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
M&L for Modular Casing Caping point wiring one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with modular MS terminal boxes (not less than 1.6 mm thick) including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed . Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.
All as per Srl item No.55 above but one fan / Exhaust fan point controlled by one modular switch .
All as per Srl item No.55 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on independent board.
All as per Srl item No.55 above but one 3 pin 10 Amp socket outlet point controlled by one modular switch on same board.
All as per Srl item No 55 above but one bell / buzzer point controlled by one modular bell switch
Description all as per item No 55 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,flame retardant Low moke(FRLS)cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with PVC Casing Caping and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S & F modular switch one way 10 Amp,1 module complete all as specified and as directed .
S&F modular socket 10 Amp,2/3 pin combined 2 module complete all as specified and as directed.
S & F modular switch one way 20 Amp,1 module complete all as specified and as directed.
S & F modular socket 10 Amp,/20 Amp,2/3 pin combined 2 module complete all as specified and as directed.
S & F modular Fan Regulator fan socket type regulator,2 module complete all as specified as directed.
S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed.
S&F modular bell push 10 Amp ,1 module complete all as specified and as directed.
S&F ceiling rose,surface bakelite 65 x50mm three terminals complete all as specified and as directed. Make Havells/ Anchor/ABB
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed.
S & F in 9W LED lamp B22,CDL,Lumen output 2000 Im, 6500 K, 80 mm dia complete all as specified as directed.
S&F Modular matching cover frame plates for 1/2 modules box complete all as specified and as directed.
S&F Modular matching cover frame plates for 3 modules complete all as specified and as directed.
S&F Modular matching cover frame plates for 4 modules complete all as specified and as directed.
S&F Modular matching cover frame plates for 6 modules complete all as specified and as directed.
S&F Modular matching cover frame plates for 8 modules complete all as specified and as directed.
S&F Modular matching cover frame plates for 12 modules complete all as specified and as directed.
S&F Modular matching blanker complete all as specified and as directed.
S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 4 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.
S & F Regid non-metallic PVC conduit not less than 20 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed
S&F 36 W 2 feet X 2 feet LED Ultra mordern recess mounting luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed .
S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.
S&F MCB DP 63 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugscomplete all as specified and directed .
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs complete all as specified and directed .
S&F VTPN DB-DPX Box 4 way double door with provision for DPX MCCBs as out going no MCB's 8+12 complete all as specified and as directed.
S&F MCCB 100 Amps,4 pole,415volts,3 phase,50HZ, having 25 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.
S & F decorative wall light fixture( FLORET ) including LED Bulb 10 Watts all as specified and directed.
S&F LED tube light fitting 1x20 Watt, 220V, decorative ultra slim LED tube light polycarbonate body connecting up to existing/new celing rose of suitable size from ceiling rose complete all as specified and directed
S&F for sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 4 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 1.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.
S&F LED tube light fitting 1x22 Watt, 220V, decorative ultra slim LED tube light polycarbonate body connecting up to existing/new celing rose of suitable size from ceiling rose complete all as specified and directed
S&F LED security/ street light fitting 1 X45 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver suitable for pole, light grade GI tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 32mm x 3 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (i) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M/s Ravi Traders
M/S Kharya Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .