Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC NO 83 AMBEDKAR STREET MITTANAMALLI AVADI IAF CHENNAI 600 055 | CHENNAI | CHENNAI | TAMIL NADU | 600055 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.2 L+₹3.0 L (29.9%)Rejected-Finance 19 C CUDDALORE MAIN ROAD PEDDANAICKENPALAYAM PO TK SALEM DIST PIN 636 109 | SALEM | SALEM | TAMIL NADU | 636109 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹13.4 L+₹3.2 L (31.2%)Rejected-Finance | L3 | Rejected-Finance BEING L3 |
Tender Value
₹15.0 L
EMD Value
₹30,000
Closing Date
25 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I RD AVADI
AGE I RD AVADI CHENNAI
REPAIRS TO CERTAIN B/R PETTY WORKS IN TECHNICAL AREA AT CVRDE AVADI
2022_MES_560308_1
8536/E8
Open Tender
Civil Works
Item Rate
210 days
CVRDE AVADI
AS PER NIT DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE I RD AVADI
₹30,000
Yes
3 Jan 2023
29 Oct 2022
28 Nov 2022
29 Oct 2022
25 Nov 2022
11 Nov 2022
29 Oct 2022 - 11 Nov 2022
Amount
Taking down or up old steel tubing for following dia bore galvanized including all connections all as specified and directed by Engineer-in-Charge.
(a) Bore of pipe in 15 mm.
(b) Bore of pipe in 20 mm.
(c) Bore of pipe in 25 mm
S&F refixing of old Galvanized steel water tubing for following dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings all as specified and as directed by the Engineer-in-Charge.
(a) Bore of pipe in 15 mm.
(b) Bore of pipe in 20 mm.
(c) Bore of pipe in 25 mm
S & F Galvanized steel water tubing for following dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings all as specified and as directed by the Engineer-in-Charge.
(a) Bore of pipe in 15 mm.
(b) Bore of pipe in 20 mm.
(c) Bore of pipe in 25 mm
S & F in repair for bib tap cast copper with capasten head, chromium plated, screwed down high pressure, with our without lettered ,Hot or Cold with long screwed with crutch or butterfly handle, fancy type ,screwed down, screwed for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair standard of 15 mm dia PTMT bib tap any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm?125gms). complete all as specified and directed by Engineer-in-Charge.
S & F in repair cast copper alloy stop cock / angle cock chromium plated fancy type screwed down, high pressure screwed ends for 15mm dia bore pipe or for unions complete all as specified and directed by Engineer-in-Charge.
S&F in repair brass pillar taps 'Fancy type" cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for 15mm dia bore iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets or bedding in cement mortar on to dwarf wall, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge
S&F PVC flushing cistern 10 ltrs and flush pipe syphonic action type low level with inlet ball valve, float and handle including brackets of approved, fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair vitreous China wash basin, angle back, size 550x400mm white, excluding taps but including brackets, cutting for and finning in ends of brackets or erecting stand and 32 mm waste fitting, brass, chromium plated for glazed ware WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and waste pipe all as specified and as directed by the Engineer-in-Charge.
S&F vitreous china wash down water closet (pedestal pattern) white including connecting to trap and to flushing pipe anti syphonage pipe etc incl seat cover complete set in concrete flush pipe to closet including all joints and making good floor and wall, fixed in repairs complete all as specified and directed by Engineer-in-Charge.
S&F in repair plastic water closet seat cover, white colour, closed pattern with, flat bottom and cover and mild steel chromoum plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge.
S & F in repair Fancy type cast copper with capasten head, chromium plated, screwed down high pressure Mixer valve including three joints with L bend to steel pipes complete all as directed by Engineer-in- Charge, screwed for 15mm dia iron pipe and all complete all as specified and directed by Engineer-in-Charge.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm dia bore iron pipe and fixed in repair complete all as specified and directed by Engineer-in-Charge. Note: Minimum weight 210 gms
S&F in repair Waste fitting brass chromiuam plated for glazed ware WHB with 32mm dia complete all as specified and directed by Engineer-in-Charge.
S&F Tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated and fixed in repair complete all as specified and directed by Engineer-in-Charge.
S&F in repair low density 32mm dia polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to WHB/urinal waste pipes complete all as specified and directed by Engineer-in-Charge.
S&F in repair low density 40mm dia polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to over flow outlet of water tank complete all as specified and directed by Engineer-in-Charge.
S&F Chromium plated cast copper alloy health facuet for 15mm dia incl telephonic pipe & holder fixed in repairs complete all as specified and directed by Engineer-in-Charge. (Make : Parryware T9940A1 Slimline with SS Hose & Hook or equivalent)
S&F EWC with Parryware cascade NXT floor mounted coupled closet with S-trap (C0232) closed with cascade NXT FM cistern (C0765) and seat cover(C8300) including all necessary fixing materials complete fixed in repairs all as specified and directed by Engineer-in-Charge.
S&F ESS ESS (C204D) Croma brass angular stop cock 2-in-1 with wall flange (chrome finish) complete fixed in repairs all as specified and directed by Engineer-in-Charge.
S&F Roatation moulded polythene water storage tank triple layer 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of old existing water tank complete all as specified and directed by Engineer-in-Charge.
S&F Roatation moulded polythene water storage tank triple layer 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of old existing water tank complete all as specified and directed by Engineer-in-Charge.
Taking down PVC SWR / Drain pipe of any type, size and length including making good disturbed surface of wall complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC SWR pipe 75 mm dia bore single socketed in any length with rubber ring joints fixed to wall/Floor complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC SWR pipe 100 mm dia bore single socketed in any length with rubber ring joints fixed to wall/Floor complete all as specified and as directed by the Engineer-in-Charge.
M&L PVC(SWR) bends in 75 mm dia complete all as specified and as directed by the Engineer-in-Charge.
M&L PVC(SWR) bends in 100 mm dia complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC (SWR) 75 mm dia junction single, (Single T) equal or unequal complete all as specified and as directed by the Engineer-in-Charge.
S&F PVC (SWR) 100 mm dia junction single, (Single T) equal or unequal complete all as specified and as directed by the Engineer-in-Charge.
Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame)each complete all as specified and directed by Engineer-in-Charge
Taking down Chowkhats or frames n.exc 1.5 sq. m with shutters (without taking off shutters from the frame)each complete all as specified and directed by Engineer-in-Charge
Taking down of Shutters of any description exc 1 sq. m and n exc 2 sq.m complete all as specified and directed by Engineer-in-Charge
Taking down of shutter of any description and Refixing in same opening of area exc 1 Sqm but n.exc 2 Sqm each after necessary repairs complete all as specified and directed by Engineer-in-Charge
S&F Hard wood 2nd class plain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge
M&L for Second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. ommercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per pecification & drawing
Taking down existing steel windows/ventilators without taking of shutters (gauzed and glazed)from the frame of area n.exc 1.50 sqm each complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium powder coated frame made out of hallow extruded section (minimum thickness of powder coating 50 micron) for window/ventilatorswith one or more rebates including joining cleats, beads for fixing etc complete all as specified and directed by Engineer-in-Charge.
S&F Alumnium powder coated sections made out of hallow/solid extruded aluminium section (minimum thickness of powder coating 50 micron) for openable windows/sliding windows/ventilators/door shutter with all types of frames with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed & approved by Engineer-in-Charge. (glass/wiremesh shall be measured and paid separately)
Hacking out old broken glasses any thickness size , quality, description from metal frame including punching or drilling out old glazing pins /spring clips etc complete all as specified and directed by Engineer-in-Charge
S & F 4mm thick Figured glass pin head type and glazing with rubber gasket in squares n.exc 0.50 sqmm in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium powder coated louvers movable type in pairs for ventilators including locking arrangement complete all as specified and directed by Engineer-in-Charge.
S&F Figured glass, pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as specified and directed by Engineer-in-Charge.
S&F 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 200mm Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium handle cast type anodized of size 150mm long complete all as specified and directed by Engineer-in-Charge.
S&F 25 x 3 mm flat iron for hold fast confirming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel Butt hinges, 100 mm complete all as specified and directed by Engineer-in-Charge
S&F aluminium alloy anodised hinges 100 mm complete all as specified and directed by Engineer-in-Charge
M&L for preparing new wooden surfaces and two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 200mm Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Aluminium handle cast type anodized of size 150mm long complete all as specified and directed by Engineer-in-Charge.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel in repairs complete all as specified and directed by Engineer-in-Charge
S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Engineer-in-Charge.
S&F in repairs door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and having high quality rubber pad complete all as specified and directed by Engineer-in-Charge
S&F hydraulic door closer universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed
S&F in repair of hydraulic door closer universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed by Engineer-in-Charge
S&F in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge
M&L for Securing glass of any description in existing in metal frames glazed with putty/ beads & glazing pins/spring clips including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed by Engineer-in-Charge
M&L for PCC 1:3:6 TYPE B0 using 20 mm graded aggregate as in coping including weathering, slightly rounded or chamfered, roof kerbs or mud stops, concrete for hold fast complete all as directed by Engr-in-Charge
Taking down cement plastering of any description scrubbing down with water washing down etc. complete all as specified and directed by Engineer-in-Charge
Rendering 15mm thick Cm 1:6 on fair face of brick walls or concrete surface finished fair and even complete all as specified and directed by Engineer-in-Charge.
M&L glazed ceramic coloured tiles on verticle surface such as skirting / dados 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including screed of 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of walls by applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smoot and applying two coats of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge..
S&F in repairs Polycarbonate sheet 5.0 mm thick as in north light glazing in workinshop building in squares exc 1.00 sqm but not exc 1.5 sqm and glazing with oil putty complete all as specified and directed by Engr-in-Charge. Note: The work to be carried out at the height of 10 meter to 15 meter.
S.T.S.CONSTRUCTIONS AGENCIES
K Kumar Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .