Improvement works of AEE/O and M/Elumathur office protection wall and paver block in AE/O and M office at Elumathur 110/22 KVSS premises in EEDC Erode

Amount

Clearing of juliflora jungle without uprooting using JCB machineries including lead lift and clearing away from the site

Earth work excavating and depositing on bank with initial lead of 10m and initial lifd of 2m in hard stiff clay. Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial llift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain cement concrete in C.C. 1:2 :4 mix using 12 to 20mm HBG machine crushed metal for protection Wall including cost of cement, all materials, labour, curing, vibration charges, with out shuttering all leads, lifts, as per standard specification, etc., complete.

Plain cement concrete in C.C. 1:2 :4 mix using 12 to 20mm HBG machine crushed metal for protection Wall including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete.

Cement Solid Block in CM 1:5 using 15 cm cement Solid block for super structure and manhole including cost of all materials, labour charges, curing,scaffolding charges all leads and lifts etc., complete and as directed by Engineer.

Plastering with CM 1:3 12 mm thick for Ceiling, including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification. Ground Floor.

Supplying and laying of Rubber moulded Hydraulic pressed paver block 60mm thick high strength type conforming IS15658-2007 of Rubber moulded Hydraulic pressed paver block lock in size of minimum compressive strength of 40N /mm2 in uniform shape of approved make to be laid in flurring bone patteren , with 6mm HBG stone jolly cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base,6mm HBG metal jelly cushion 150mm thick laying (joint filling using P.sand) out of pavement cut the pieces to fix the edge vibarating the pavers, sweeping transporting, loading unloding of laying paver block as per standard specification.etc., complete.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar footing including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar upto GL including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Reinforced Cement concrete in C.C. 1:1½:3 mix, using 12 to 20mm HBG machine crushed metal for Gate pillar above GL including cost of cement, all materials, labour, curing, all leads and lofts vibrating charges including cost of shuttering as per standard specification, etc., complete. but excluding cost of steel reinforcement.

Providing steel reinforcement MS/RTS rods for all reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Painting with ready mixed enamel paint of approved quality two coats for old Iron work including cost of all materials , lead and lift etc., complete.

Painting the existing wood works for doors and windows cost etc with two coats of approved enamel paint over a existing painting including cost of scrapping all materials, labour, leads, lifts,etc.,complete and as directed by Engineer at site.

Reparing the damaged windows changing of broken glass(0.56x0.52) including cost of all materials, labour charges, scaffolding charges, Welding all leads and lifts etc., complete and as directed by Engineer.(Electrical Supply Issued by departmently at free of cost)

Labour charges for Repairing dameged wooden Glazed window shutter frames & ventilator frames in position after repairing incluting labour charge for replacemnt of demaged furniture fittings (hinges,pad lock ,handle) etc., complete

Labour charges for Repairing dameged fully pannelled wooden door double leaf shutters with frame in position after repairing incluting all materials, labour charge for replacemnt of demaged furniture fittings (hinges, pad lock, Aldrops, handle) lead and lift etc., complete

Labour charge for removed of door shutter with frames hinges and fastenings for aee office rest room (frame with shutter) including cost of all materials labour charges lead, lift etc.complete.

Chipping, Clearing and removing the existing damaged flooring and laying the flooring with Non-slippery Tiles of approved quality and colour, with CM 1:3 10mm thick over cement concrete flooring and pointing with same colured cement including cost of all materials, labour, lead, lift etc, complete as per specification.

Dadooing walls with first quality design ceramic tiles 305mmx 305mmx6mm of approved colour and make quality of ISI std, laid in CM 1:2, 10mm thick and pointing with colour cement using 0.40kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification.

Supplying and fixing in position of European water closet with p or s trap with double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank of approved quality colour with all accessories including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Supplying and fixing in position of Wash Hand Basin of approved quality White & size of 550 X 400 mm with all accessories such as Cast Iron Brackets, 32 mm dia CP waste coupling, rubber plug and chain, 32 mm dia 'B' class GI waste pipe, 15 mm dia GM wheel valve, 15 mm dia Nylon connection, 15 mm dia Brass nipples, 15 mm CP pillar tap including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Earth work excavation in all classes of soil and SDR to a volume of 1.50 X 1.50 X 2.44, supplying and fixing in position of precast RCC circular ring (1200 mm) outer dia including top cover and filling the Dispersion trench chamber with brick jelly to a depth of 400 mm, 20mm HBG to a depth 400mm and 40mm HBG to a depth of 400mm including cost of all materials, lead, lift, etc complete and as directed by Engineer at site.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (UPVC) sections.Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window systemshould be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm X 58mm and shutter profile size of 60X78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The Ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Wiring with 2 x 1.5 Sq.mm PVC insulated single core unseathed copper conductor Cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with GI switch box in flush with wall with continuous earth line connection of 1.5 Sqmm wire and 6 A Switch 1 Module of open light point /Fan point (SD-20)

Supply and fixing of 16A 2pin 3pin combined flush type wall socket with 6A module switch on suitable Flush box as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand-Myrius)

Supply and fixing of 6A 2pin 3pin combined flush type wall socket with 6A module switch on suitable Flush box as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: legrand-Myrius)

Supplying and fixing of 4’ single box type fluorescent fitting with 20W LED Tube with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting with tubes. (philips/Crompton make).SD 91

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5sqmm wire with painting of suitable colour. (SD 44)

Supplying and fixing of 1200mm (48”) sweep AC ceiling fan with 300 / 600 mm down rod with appd best quality make of standard specification with electronic regulators and switch including cost of all materials, labour, fixing, charges as per standard specification, etc., complete. (Make : Crompton)

Supplying and fixing of 25 mm dia PVC pipe 10Kg/cm2 (Shell thickness 2 to 3 mm) for water supply line, including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 40 mm dia PVC pipe 10 Kg/cm2 (Shell thickness 2 to 3 mm) of appd. Quality for water supply line from water sump and delivery line including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Supplying and fixing of 25 mm dia GM ball valve appd. Quality for water supply line including labour, lead, lift and fixing in position etc., complete.

Providing fixing 12mm screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, as per standard specification etc. complete

Supplying and fixing of 110 mm dia PVC pipe for sewage line of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing of 8 way two pole and natural MCB sheet steel enclosure distribution board with double door 1 No. 63 Amps and 32Amps DPIC switch of 500V as incoming 24 Nos. 63 amps and 32A SPMCB out going necessary on wall portion with earthy as per standard specification, etc., (SD167)

Supplying and fixing of Lane cable distribution 2U Rack with Accessories and necessary clamp& screws including cost of materials, labour, lead and lift etc complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu