Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹3.3 L
Closing Date
10 Jun 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
k s patil
Development of Infrastructure and Pipeline network for Treatment and reuse of Grey water of Nandikoor STP (Phase 4) in Kalaburagi City. (Est Cost 222.50 Lakhs) (15th Fiinance 2023-24) (Category-Others)
DMA/2024-25/OW/WORK_INDENT17892
DMA/2024-25/OW/WORK_INDENT17892
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Corporation Kalaburagi
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Satisfactorily completed at least one similar Construction of over head tank and allied pipeline work of value not less than Rs. 111.25 Lakhs as prime contractor.
PWD license certificate
Achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs. 445.00 lakhs.
Liquid assets and or availability of credit facilities of no less than Rs. 66.75 Lakhs (Credit lines/ letters of credit/ certificates from Scheduled banks for meeting the fund requirement etc. (Unconditional banker certificate).
ESI & PF Registration Certificate to be Enclosed
Executed in any one year (for a continuous period of 12 months) the following minimum quantities of work
Tender bid capacity The bidder should upload the ongoing works in hand
₹4,560
₹3.3 L
24 May 2024
24 May 2024
11 Jun 2024
10 Jun 2024
10 Jun 2024
Development of Infrastructure and Pipeline network for Treatment and reuse of Grey water of Nandikoor STP (Phase 4) in Kalaburagi City. (Est Cost 222.50 Lakhs) (15th Fiinance 2023-24) (Category-Others)
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:
(SR 2023-24 Vol-5 Item No. 7.11/Pg.no.88)
I 300 mm dia CI Duck foot bend
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:
(SR 2023-24 Vol-5 Item No. 7.11/Pg.no.88)
II 300 mm dia CI Duck foot bend
Providing Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:
(SR 2023-24 Vol-5 Item No. 7.11/Pg.no.88)
III 100 mm dia CI Duck foot bend
Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S CIRCLE KLB SR 2019-20 Pg.No...
Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S CIRCLE KLB SR 2019-20 Pg.No...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and laying Ductile Iron pipes of class conforming to IS
8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing and laying Ductile Iron pipes of class conforming to IS
8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing and laying Ductile Iron pipes of class conforming to IS
8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing and laying Ductile Iron pipes of class conforming to IS
8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...
Providing & fixing Mechanical joints to cast iron pipes or Ductile iron pipes including cost of rubber gaskets and testing of joints. mechanical joints items will be supplied by the department. (contr...
Providing & fixing Mechanical joints to cast iron pipes or Ductile iron pipes including cost of rubber gaskets and testing of joints. mechanical joints items will be supplied by the department. (contr...
Providing & fixing Mechanical joints to cast iron pipes or Ductile iron pipes including cost of rubber gaskets and testing of joints. mechanical joints items will be supplied by the department. (contr...
Providing & fixing Mechanical joints to cast iron pipes or Ductile iron pipes including cost of rubber gaskets and testing of joints. mechanical joints items will be supplied by the department. (contr...
Labour charges for making flanged joints including cost of jointing
materials comprising of rubber insertion, galvanised bolts and nuts including giving hydraulic test to the required pressure as per...
Labour charges for making flanged joints including cost of jointing
materials comprising of rubber insertion, galvanised bolts and nuts including giving hydraulic test to the required pressure as per...
Labour charges for making flanged joints including cost of jointing
materials comprising of rubber insertion, galvanised bolts and nuts including giving hydraulic test to the required pressure as per...
Labour charges for making flanged joints including cost of jointing
materials comprising of rubber insertion, galvanised bolts and nuts including giving hydraulic test to the required pressure as per...
Labour charges for laying & jointing of DI pipes of all classes rolling and lowering into trenches, laying true to line, level and perfect linking at joints and commissioning, including loading and un...
Labour charges for laying & jointing of DI pipes of all classes rolling and lowering into trenches, laying true to line, level and perfect linking at joints and commissioning, including loading and un...
Labour charges for laying & jointing of DI pipes of all classes rolling and lowering into trenches, laying true to line, level and perfect linking at joints and commissioning, including loading and un...
Labour charges for laying & jointing of DI pipes of all classes rolling and lowering into trenches, laying true to line, level and perfect linking at joints and commissioning, including loading and un...
Providing plastering in CM 1:3 proportion for RCC over head tanks,
including smooth finishing, minimum 2% of approved quality water
proofing compound, curing, scaffolding and giving satisfactory wat...
Providing plastering in CM 1:3 proportion for RCC over head tanks,
including smooth finishing, minimum 2% of approved quality water
proofing compound, curing, scaffolding and giving satisfactory wat...
Providing plastering in CM 1:3 proportion for RCC over head tanks,
including smooth finishing, minimum 2% of approved quality water
proofing compound, curing, scaffolding and giving satisfactory wat...
Providing plastering in CM 1:3 proportion for RCC over head tanks,
including smooth finishing, minimum 2% of approved quality water
proofing compound, curing, scaffolding and giving satisfactory wat...
Providing plastering in CM 1:3 proportion for RCC over head tanks,
including smooth finishing, minimum 2% of approved quality water
proofing compound, curing, scaffolding and giving satisfactory wat...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces (SR 2021-22 -VoI.-3 SR/I.No8.10/Pg...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade (Com SR 2021-22-Vol-3 SR/I.No8.3/Pg.no.53)
Providing, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations andro...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
ESTIMATE OF PUMPING MACHINERY WITH ACCESSORIES FOR MAIN GLSR A
Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specified pump o...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (SR 2023-24 Vol-5 Item.No.11.6.9/Pg.no.129)
For 125 mm dia GI collar:
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:
(SR 2023-24 Vol-5 Item.No.11.7.10/Pg.no.129) For 125 mm dia GI ...
Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any. (SR 2023-24 Vol-5 Item.No.11.9/Pg.no.130)
For 125 mm dia GI TEE:
Lowering, Laying and Jointing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and hreads wherever necessary, including t...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10 ...
Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards.
pressure guage 80MM (SR 2023-24 Vol-5 Item.No.13.41.1/Pg.no.157)
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 80 mm (SR 2023-24 Vol-5 Item.No.13.24.3 Pg.no.154)
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 80 mm(SR 2023-24 Vol-5 Item.No.13.25.3 Pg.no.154)
Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments.
Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump above 12.50HP confirming with ISI mark and its latest amendments. (SR 2023-24 Vol-5 Item.No.13.48 Pg.no.158)
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Erection, testing, commissioning and trial running of centrifugal pump and motor with all accessories necessary for satisfactory running of pump including cost of all materials, machinery, labour & al...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labou...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
ESTIMATE OF PUMPING MACHINERY WITH ACCESSORIES FROM GLSR B TO OHT TANK
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM (...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any.
(SR 2023-24 Vol-5 Item.No.11.6.9/Pg.no.129) For 100 mm dia GI collar:
Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any.
(SR 2023-24 Vol-5 Item.No.11.9/Pg.no.130)For 100 mm dia GI collar:
Lowering, Laying and Jointing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and hreads wherever necessary, including t...
Lowering, Laying and Jointing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and hreads wherever necessary, including t...
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:
(SR 2023-24 Vol-5 Item.No.11.7.9/Pg.no.129) For 100 mm dia GI...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10 ...
Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards. pressure guage 80MM
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 80 mm (SR 2023-24 Vol-5 Item.No.13.25 Pg.no.154)
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 80 mm (SR 2023-24 Vol-5 Item.No.13.25.3 Pg.no.154)
Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. 7.5 to 10 HP centrifugal pump (SR ...
Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments. (SR 2023-24 Vol-5 Item.No.1...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (SR 2023-24 Vol...
Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labou...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Development of Infrastructure and Pipeline network for Treatment and reuse of Grey water of Nandikoor STP (Phase 4) in Kalaburagi City.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 95sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 70 Sqmm,...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using
Wooden/Aluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm
Supplyandfixingof3- ole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current, fixed on Existing wood/panel ...
Fixing a shun teapacitor of. 11 to 20kVAR Capacity with necessary clamps,bolts,and nuts on existing wood enormetal board including banking of more than one capacitor.
Supplying and fixing capacitor's 80 to 200mfd starting capacitor.
Supplying&fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.200 A
Supplying of Switch disconnect or fuse unit (TPN) HRC type (butwithout HRC fuses). With AC-23A duty and as per IS- 13947.250 A
Supplying and fixing HRC fuse units base on existing switch/panel board. 100 to 300 A
Supplying and fixing Moulded Case Circuit Breaker(MCCB)over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators,handle and wiring complete.Protection of Overl...
SupplyingandfixingangleironframeworkfabricatedoutofM.S.angleiron.andM.S.Flat.withb
olts, washersetc.,andpaintedwith 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
Fabricating supplying and mounting MS boxmadeout 14 WG suitable for floor/wallmounting, fully weather proof with provision
forbetterheatdissipation.providedwithhinged frontcover,equippedwithtamperproo...
Supplying A rated 3 phase with neutral busbarusingrequiredcapacityelectrolyticaluminiumst
ripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorw
hicharemountedonpowdercoate...
Alluminium End Terminal Lug 95 sqmm
Supplying,fixingandwiring3PhaseDigitalAmmeter/Voltmeter
Gl/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required. 40 x 6 mm GI strip
Supplying&FixingChemicalearthlingforgrounding. Conduits,ICcut-outs&otherequipmentsbackfillcompoundwhichisnon-
corrosive, thermallyconductive,potentialtopermissiblelimits,superiorF aultconductioncapaci...
Supplyandfixingo/3polepowercontactorwithNO/NCcontactsonexistingwood/panelboardusing
necessarybolts,nuts, washersand wiring etc., complete with AC-3 Rating and as per IS-13947.
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-4 (1).doc
Tender Document • 0.95 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .