Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹10.6 L+₹1.0 L (10.6%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹11.3 L+₹1.7 L (17.7%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹11.7 L+₹2.0 L (21.2%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹12.0 L+₹2.4 L (25.2%)Rejected-Finance JAIN SADAN MAHAL ROAD SHIVPURI DISTT SHIVPURI MP | SHIVPURI | SHIVPURI | MADHYA PRADESH | L5 | Rejected-Finance High Rate |
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
1 Apr 2023, 6:00 pmClosed
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8394PROVN OF VOLLEY BALL COURT WITH SQUARE MESS FENCING AT NURSING CADETS MESS PROVN OF RAIN WATER DRAIN AT BACKSIDE OF 264 MEN BARRACK AND PROVN OF IRON SEFTY DOOR AND MS GRILL AT WINDOW AT BLOOD DONATION CAMP STORE IN DEPT OF IH AND BT AT AFMC UND
2023_MES_585119_1
8394 PROVN OF VOLLEY BALL COURT WITH SQUARE MESS F
Open Tender
Civil Works
Item Rate
120 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹31,000
Yes
24 Apr 2023
10 Mar 2023
3 Apr 2023
10 Mar 2023
1 Apr 2023
20 Mar 2023
Amount
Surface excavation not exceeding 30 cm deep and an averaging 15 cm deep and getting out any type of soil complete all as specified and as directed.
Excavation over areas not exceeding 1.5 Mtr deep and getting out in hard / dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth for foundations etc or shafts , wells , cesspits , manholes , pier holes etc not exc 10 Sqm on plain and not exc .5 Mtr in depth and getting out any type of soil complete all as specified and as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soil complete complete all as specified and as directed.
Romoving the excavated surplus materials (soils) to a distance exceeding 1.50 KM but not exceeding 5.00 KM and deposting where as directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.
Romoving the excavated surplus materials (soils) to a distance exceeding 50 Mtr but not exceeding 250 Mtr and deposting where as directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed.
Excavating in post holes (or similar holes) not exc 0.50 Cum each and getting out , returning, filling in and ramming earth or broken rubber mixed with earth around in layers not exceeding 25cm in hard and dense soil complete all as specified and directed
Excavating in post holes (or similar holes) not exc 0.50 Cum each and getting out , returning, filling in and ramming earth or broken rubber mixed with earth around in layers not exceeding 25cm in soft and loose soil complete all as specified and directed
M & L for moorun / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick , spread levelled and remmed including watering and ramming compete all as directed.
M & L for Hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and lavelled in layers not exceeding 15cm thick watered and remmed to a true surface compete all as directed.
M & L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete complete all as specified and as directed..
M & L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete complete all as specified and as directed..
M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 complete all as specified and as directed.
M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M & L 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone agreegate) as in plinth protection / paving finished even and fair all as specified.
S & F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290-0 Grade E-165 complete all as specified and as directed.
M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Supply & Fix 4.00mm dia galvanised chain link fencing any mesh size including line wires and provission of binding wire complete all as specified and directed.
M & L for rendering 15mm thick in CM 1:4 over brick / concrete surfaces of wall, finished the surface even and Smooth without using extra cement complete all as specified and as directed.
M & L for providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) as in window cill , copings etc and like including use and waste of necessary formwork complete all as specified and as directed.
M & L preparation of new pasterred or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer all as specified.
M & L for 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) as in drain floors complete complete all as specified and as directed.
M & L extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms mould, mitred / stopped ends etc complete all as specified and as directed.
S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forget into spikes framed guard bars barred iron doors, ladders, framed balusterts walk ways railings framedwork of water tanks and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.
M & L for 300mm bore dia reinforced concrete drain pipes class NP-3 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed .
M & L Cement Concrete bed to drain pipes, 1:4:8, type D-2 using 20mm graded stone aggregate including formimg cradles for 300mm bore dia pipe all as specified and as directed .
Demolition of bricks work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed .
Demolition of cement concrete (unreinforced) in ground floor on paving not exceeding 15cm thickness (below or above the ground level) complete all as specified and directed .
M & L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base compete all as specified and as directed.
M & L Chequered cement concre tiles 30cm x 30cm x 25mm thick with mixture white cement and pigment, set, jointed and pointed in neat cement slurry in floors in coloured cement to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed.
Dismatling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises compete all as directed.
Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
S & F mild steel, plain black sheet of 1.25mm thickness in wall cladding, steel gates and similar work cut to size holes punched including round headed screws, clourt nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required and complete all as specified and directed.
S & F 125mm butt hinges, medium weight, cold rolled stainless steel all as specified and as directed.
S & F 150mm Aluminium powder coated handels , cast types all as specified and as directed.
S & F 150mm Mild steel barrel tower bolt, stove enamelled black with bright bolt all as specified and as directed.
S &F 250mm Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt on plate and two on staple plate all as specified and as directed.
S & F Mild steel works in tubular section of any shape and size or designation for column, steel doors along with connecting plates including all necessary welding, driling, bolting or riveting etc and similar work conforming to I.S-1161-1979 grade St-240 complete all as specified and directed
M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise descrined and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and as directed. .
Demolition of renforced cement concrete of any description and in any position not otherwise specically provided and rubbish off premises complete all as directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .