REPAIR MAINT OF INTERNAL ELECTRIFICATION WORKS REPLACEMENT OF UNSV DBS MCBS VARIOUS TYPES OF LIGHT FITTINGS AND FIXTURES SUB MAIN WIRING WITH CONNECTED WORKS AT AMAR VIHAR OFFRS MD ACCN RANJITH HALL SQAE OFFICE COMPLEX AT DGQA AREA AND REPAIR/MAINT O

Amount

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable/pipes in loose/soft soil complete all as specified and directed.

All as per the description srl item No 01 above but hard/dense soil.

All as per the description srl item No 01 above but soft / disintegrated rock.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&L for galvanised steel water tubing medium grade ISI marked screwed socketed joints complete with all tube fitting such as bends, elbow, tees, short pieces, connectors, caps, plugs and unions, etc and fixing complete with clips, wall hookswooden plugs, or laying in trenches, etc, also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes. Note:- 1. Laying of pipe line on wall/floors/terrace of high rise buildings up to the 8th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work 2. Earthwork shall be measured and paid separately under relevant items.

100mm dia

80mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

S&F gunmetal gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe including taking out unserviceable valve for the following sizes:-

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

S&F PP-R polypropylene random copolymer concealed pipes SDR 7.4, PN 16 stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc including necessary fittings, fixtures and fixing material etc including taking out unserviceable pipe complete all as specified and directed of following sizes outer dia. Note:- Laying of pipe line on wall/floors/terrace of high rise buildings up to the 8th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work.

20mm dia Make:- Supreme/Finolex/Kissan or equivalent as approved by GE.

25mm dia Make:- Supreme/Finolex/Kissan or equivalent as approved by GE

40mm dia Make:- Supreme/Finolex/Kissan or equivalent as approved by GE

50mm dia Make:- Supreme/Finolex/Kissan or equivalent as approved by GE

S&F PP-R gate valves brass insert as per requirementof the site including taking out unserviceable valve for the following sizes:-

20mm dia

25mm dia

40mm dia

50mm dia

S&L DI water tubing 6mm thick, as per IS 3589, heavy duty, class 'C' complete with all fittings such as ends, elbow, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc and fixing complete with clips, wall hooks, wooden plugs or laying in walls and ceiling etc, also cutting, screwing and waste and for making forged bends on piping, welding as required at site with two coats of synthetic enamel paint over one coat of red oxide primer including takind down unserviceable pipe complete all as specified directed for the following sizes:-

80mm dia

100mm dia

M&L for DI specials of any size such as tees, bends of any size and radius, tapers, collers, tail pieces, caps and plugs etc including takinng down unserviceabl complete all as specified. Note:- Earth work shall be measured and paid separately.

M&L for rubber gasket joint tyton joint with jointing material for DI/CI pipe of 100mm bore including taking down unserviceable complete all as specified and directed. Note:- Earth work shall be measured and paid separately

All as per the description srl item No 12 above item but 150mm dia.

M&L in replacement for CI spigot and socket pipe fittings such as bends any type, radius angle tapers any type, straight, bend, increasing, decreasing or double socket etc, tee pieces single branch, Y Junction, double branch, cross all sockets or socket and spigot collars, caps and plugs of up to 150mm bore including taking down unserviceable fittings complete all as specified and directed.

M&L for run lead joint including preparation of ends, provision of Hemp/yarn gasket and pig lead filling and proper caulking for CI/DI pipe of 80mm bore complete all as specified and directed. Note:- Earth work shall be measured and paid separately.

All as per the description srl item No 15 above item but 100mm dia.

M&L for cast iron sluice valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete all as specified and directed for the following dia of bore:-

50mm dia

80mm dia

100mm dia

M&L for NRV heavy duty conforming to ISI marked both ends flanged including jointing material such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete all as specified and directed for the following dia of bore:-

50mm dia

80mm dia

100mm dia

M&L for foot valves strainer, releasing flip type with rubber gasket including necessary fittings, fixtures nuts, bolts and other arrangements including taking down unserviceable valves all as directed at site for the following dia of bore:-

50mm dia

80mm dia

100mm dia

Supply only calcium hypochlorite 65% to 70% chlorine content in granual form calcium based granular disinfect for water treatment packed in 45 kgs each drum complete all as specified and directed. Make:- Aquafit/Puri Chlor/Bluehorizons or equivalent as approved by GE

M&L for chlorine test kit with coloured sample complete with all testing fitment and OT solution in rexine finish box. Make:- Aquasol or equivalent as approved by GE

M&L for total hardness test 5-1000 mg/L kit with coloured sample complete with all testing fitment and OT solution in rexine finish box. Make:- Aquasol or equivalent as approved by GE

S&F of crystal common salt using for regeneration process in water softner plant complete all as specified and directed.

M&L for bailing out the water from the semi underground/UG sump up to 40,000 GLNS with out causing any interruption to regular water supply system and cleaning the same walls, roof and floor thoroughly by using wire brush/scrapper for removal of deposited scales/sludge/silt etc and removing the materials out of site cleaning thoroughly with water and bleaching powder and then by chlorine solution for complete anti bacterial disinfections with applying one coat of white wash inner and outer side including writing date of cleaning on the black board with white paint all as specified and directed. Note:- Rates quoted deemed to be inclusive of T&P and safety equipments required at site.

M&L for wiremesh frame including necessary calmp arrangements for suitable bore of 100/150mm vent pipes for semi UG sumps in all as specified and directed.

M&L for Construction of valve chambers 1200mm x 1200mm x 900mm with 15cm thick solid concrete block masonary, block casted using PCC 1:3:6 type C-1mix built in cement and sand mortar 1:4,15mm plaster to thick internal surface and external surface up to 15cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement 15mm thick, MS sheet cover 3mm thick including 40mm x 40mm x 3mm MS angle frame embedded in 150mm thick PCC 1:2:4 type B-1, with 25mm x 6mm flat iron hold fast, handles, hinges with locking arrangments, applying one coat of red oxide primer and two coat of synthetic enamel paint to all steel surface and earth work in type of soil including demolition of existing damaged valve chambers & disposal of surplus soil to a distance n.exc.50m complete all as specified and directed.

All as per the description srl No 26 above item but size 90cm x 90cm x 90cm

Removing underviceable and Material & Labour for cross arms, bracings, supports, clamps, angle iron, flats and back plates fabricated from MS structural steel sections including nuts, bolts and washers of suitable sizes for making supporters, ladders in water tanks, frames, pump houses including welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of black paint over one coat of red oxide primer complete all as specified and directed.

S&F for testing and commissioning high pressure booster pump, RPM 2700, size 25mm x 25mm, 0.1 HP,1 phase, head range 6-28 mtrs, discharge 2700-450 LPH, capacitor run 10 MFD, 2 pole type complete with fixing necessary PCC foundation, accessories with complete system including taking down old unserviceable deposit to store yard complete all as specified and as directed. Make : Kirloskar model star galaxy or equivalent in /Crompton/KSB

Collecting water samples on clean bottle from borewells/UG sumps/service tanks and getting tested for physical, chemical and bacteriological prameters as per IS 10500:2012 analysis from approved institutions/lab and submission of results in triplicate complete all as specified and directed.

Comprehensive maintenance inclding preventive and periodical maintenane of sand filter media flow rate capacity 35 cum/Hr - 04 Nos and softner plant flow rate capacity 50 cum/ Hr - 04 nos with connected motors, UPVC pipe lines, butterfly valves etc, (Make - Optimus Envirpro Pvt Ltd, Resin -Thermax), installed at amar vihar pump house in reliable safe and efficient condition through MOU with OEM by periodically examining, preventive maintenance of plants, pipe lines, valves for trouble free function as per recommendation and attending breakdown/ complaint as and when on required basis, maintenance on regular basis complete with preventive maintenance including replacement of UPVC pipes different sizes short lengths upto 5 mtrs, fittings, flanges with nut and bolts, pressure gauges, replacement of required necessary fittings alongwith rectification of defects complete all as specified and directed. Notes:- (i) The contractor shall carry out routine checking of the complete plants and rectify the any defects noticed immediately (ii) Copy of agreement concluded between contractor & OEM for execution of work thorugh OEM shall be submitted to GE with in 07 days from date of commencement. (iii) Treated water total hardness should be maintained less than 200 mg/l and submit he monthly water test report of total hardness (CaCO3) of treated water. (iv) The rates quoted against for this item shall be applicable for a period of 01 month. (v) Rates quoted aginst the above mentioned work wise items are required of efficient working of plant are to be included in the job. (vi) If complaints were not rectified within 04 hrs of intimation, the following penalities will be imposed and deducted from contractors dues :- (a) Rs 1500/- per complaint for not attending the complaint and keeping pendig 04 hrs to 12 hrs/ per complaint. (b) Rs 3000/per complaint for not attending the complaint and keeping 12 hrs to 24 hrs/per complaint.

M&L for topup of resin for softner plant complete all as specified and ditected.

S&F in reapirs of multi port valves/butter fly valves 100mm dia fixing at sand filter and softner plant vessles complete all as specified and ditected.

M&L for cutting of road/path for laying of pipe line and making the good to disturbed road/ path including provision of PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and ditected.

S&F in replacement of water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-20 kg/cm2 pressure range including taking down unserviceable complete all as specified & directed.

S&F in replacement of water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-14 kg/cm2 pressure range including taking down unserviceable complete all as specified & directed.

M&L for spray painting of complete water pumpset of cap any type up to 20 HP with two coats of synthetic enameled paint of specified colour after preparation of surface and writing letters and numbers complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enameled paint of approved shade all as specified.

Supply only spares suitable for sluice valve of size 50/80mm dia complete all as specified and ditected.

Spindle stainless steel

Check nut gunmetal.

Gland ring with packing

T nut and bolts

Supply only spares suitable for sluice valve of size 100/150mm dia complete all as specified and ditected.

Spindle stainless steel

Check nut gunmetal.

Gland ring with packing

T nut and bolts

M&L for lifting and lowering of submersible pump and motor set from bore well of any dia after disconnecting electric and water connection of any make and any size capacity under any of chain pulley block or manually appropriate length 70 mtr to 200 mtr after opening the socket and pipe complete all as specified and ditected.

M&L for flushing & developement of bore well of any capacity and size at the pressure 10 kg/sqcm to 15 kg/sqcm by diesel engine driven air compressor of capacity 620 cm, depth up to 200 mtrs with using air pipe and connected items to improve the yield of tube well as specified and directed. Note:- 1.Rates included for transportation of air compressor along with tools and accessories at differenet locations in AOR. 2. Lifting / lowering of borewell shall be measured and paid separately.

M&L for dismantling carefully submersible motor and taking out motor and removing all burnt wire from the starter after cutting rewinding of motor with PVC insulated finolex make copper conductor water proof suitable for submersible motor of require size but not less than original grinding of rotor and reassembling the rotor and stator and replacement of bearing bush sleeve of rotor painting of motor with approved colour of synthetic enameled paint all as per specified and directed for the following sizes.

Supply only thrust bearing for submersible pump.

Supply only rotor of motor for submersible pumps of the following sizes complete all as specified and ditected.

Supply only coupling bush for submersible pump and motor.

Supply only sand guard for any make of pump.

Supply only GM impeller for submersible pump any make of 3 to 7.5 HP capacity.

Supply only gland packing with wire rope 1/4 " 1/2".

Supply only rubber insertion sheet 4mm thick.

S&F in repairs for PVC insulated water proof flat 3 core cable 1100 volt grade submersible with copper conductor stranded of size 4 Sqmm.

S&F in replacement of fully automatic star-delta starter in exist LT Panel with necessary rating contacotrs, OLR for rating 5 to 15 HP any type of motors and pump sets including with necessary wiring in exist panel complete all as specified and directed. (Make/model- as per sample)

S&F in replacement of fully automatic star-delta starter in exist LT panel with necessary rating contacotrs, OLR for rating 15 to 30 HP any type of motors and pump sets incl with necessary wiring in exist panel complete all as specified and directed. (Make/model- as per sample)

S&F in replacement 3 pole power contactor for starter with suitable size copper wiring, copper thimbles including taking down old one complete all as specified and directed of the following capacity.(Makes/Model- as per sample)

S&F in repairs for single phase preventor for 3 phase motors fixed for star delta starters all as directed.(Makes/Model- as per sample)

S&F in replacement automatic phase sequence corrector having capacity 5 -30 HP pump sets, automatically correct Input supply reverse phase also protections against single phasing voltage unbalancing and low & high voltage within 3 to 5 seconds. (Make/model - as per sample)

S&F in repairs for thermal OLR suitable current rating for ML 0 to ML 3 contactors with suitable size copper wiring, copper thimbles including fixed in exist PBs complete all as specified and directed.

S&F mild steel tubing heavy duty class -C column pipe, 50mm bore conforming to IS-1239 coupled with heavy duty suitable size of MS flanges 12mm thick duly welded on both sides as directed including necessary nut and bolts with washers & rubber packing required at site condition and lowered in to the bore well including taking out old unserviceable column pipe complete all as specified and directed. Note : - Taking out and lowering of submersible pump set shall be measured and paid under respective item.

M&L for disconnection electrical and water connection of the centrifugal pump and motor 20/25 HP with base plate and transported to work shop opening carefully and replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt fixing the require new parts parts such as shaft, impellor, coupling & bearing shall be supplied under relevant item of schedule and complete re-fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the following size/ capacity of motors. Note:- Rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning.

Supply only shaft suitable for 20/25 HP centrifugal pumps for the following sizes complete all as specified and ditected..

Supply only GM impellor suitable for 20/25 HP centrifugal pumps for the following sizes complete all as specified and ditected.

Supply only MS coupling suitable for 20/25 HP centrifugal pumps for the following sizes complete all as specified and ditected.

Supply only bearing suitable for 20/25 HP centrifugal pumps for the following sizes complete all as specified and ditected.

M&L for rewinding of electrical motor 20/25 HP with super enameled copper winding wire of suitable size not less than original after cutting and taking out old winding complete with all insulation material such as colton top varnish etc of centrifugal pump set motor all as specified and directedfor the following sizes.

M&L for disconnection electrical and water connection of the induction motor/self priming set/high pressure pumps up to 7.5 HP with base plate and transported to work shop opening carefully and replacement of bushes, winding, gland packing, ball bearing, rubber gasket nut and bolt including two coat of synthetic enameled paint over a coat of red oxide primer, shaft impeller and coupling bearing and complete re-fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the following size/ capacity of motors. Note:- Rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning.

M&L for PCC 1:3:6, type C1 using 20mm graded crushed stone aggregate as in foundations, flooring and coping filling and mass concrete with cement plastering finishing all as specified and directed.

Design fabricate, supply, install, testIing and commissioning of factory made floor mounted bore well starter panel board outdoor type made out of 3.15mm thick CRCA sheet totally enclosed with necessary ventilations, weather dust and vermin proof with front opening and locking arrangement 240 volts, single phase, complete with the following accessories:-

Taking down carefully copper/aluminium point wiring light / fan / socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete all as specified and directed.

M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor with same specification casing caping including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

One light point controlled by two two way switches

All as per the description srl item No 79 above item but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let 16 amps on independent board

All as per the description srl item No 79 above item but wiring with 4sqmm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 amps point and one single core 4.00sqmm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring concealed type with 1.5 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic suitable size PVC conduit complete with all PVC conduit accessories suitable for modular type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note: 1. Rates deemed to be included for GI metal flush box reqd modulars size, modular cover inner and outer plates, blanking plates etc complete. 2. Modular switch, sockets, bell push measured and paid separately under relevant items.

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per above the description srl item No 82 above but with 2.5 sqmm nominal cross sectional area copper conductor cable for one 16 amps socket outlet point on independent board with 2.5sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per above the description srl item No 82 above but wiring with 4 sqmm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 amps point and one single core 4.00sqmm PVC insulated unsheathed copper cable as earth continuity conductor

S&F in replacement of concealed metal GI box 10 to 16 modules having high durability, corrosion resistant, earthing terminal with repalcement of modular type inner and outer plate covers with screws, including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note:- 1. Rates deemed to be included for removing and refixing of electrical point connections in switch board complete. 2. Modular switch, sockets, regulators, bell push to be measured and paid separately

All as per the description srl item No 85 above description but 06/08 modules complete.

All as per the description srl item No 85 above description but 03/04 modules complete.

All as per the description srl item No 85 above description but 01/02 modules complete.

S&F switch piano flush type 5/6 amps single pole one way 230 volts complete all as specified and directed.

S&F switch piano flush type 15/16 A single pole one way 230 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3/5 pin 5 amps flush type 230 volt complete all as specified and directed.

S&F socket outlet 2 in 1, 3/6 pin 5 and 15 amp flush type 230 Volts complete all as specified and directed.

S&F 2 way switches 5 amps 230 volts complete all as specified and directed.

S&F bell push, flush type 5 amps 230 volts complete all as specified and directed.

S&F electronic fan step regulator flush type 120 watt, 230 volt complete all as specified and directed.

S&F ding dong bell, AC, 230 volts, single pole complete all as specified and directed.

S&F lamp holder, 230 volt AC, PVC / polycarbonate type of angular shape with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 6 amps, 250 volts, AC with three terminals and PVC / polycarbonate insulated body of 50mm x 25mm size complete all as specified and directed.

S&F modular switch 6 amps, one way, one module 240 volts complete all as specified and directed.

S&F modular socket, 3/5 pin 6 amps,240 volts, 2 module complete all as specified and directed.

S&F modular switch 16 A, 1 module,240 volts complete all as specified and directed.

S&F modular socket 6/16 A, 5/6 pin, 2 module, 240 volts complete all as specified and directed.

S&F modular bell push 6 amps, one module 240 volts complete all as specified and directed.

S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete all as specified and directed.

S&F in repair sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 amps.

M&L in repair for two single core submain PVC insulated cable with 4 sqmm nominal cross sectional area 1100V, stranded copper conductor, multistranded, and one single core green PVC insulated 4.00sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed.

All as per the description srl item No 106 above herein before but with 6 sqmm two runs and 6sqmm one run as earth wire

All as per the description srl item No 106 above herein before but with 10 sqmm two runs and 10sqmm one run as earth wire

S&F MCB DB, single pole and neutral with 200 amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following :-

All as per the description srl item No 109 above but 8 way

All as per the description srl item No 109 above but 12 way

S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete all as specified and directed.

S&F of loadline distribution box 8 way, AC, TP & neutral metal enclosure, glazed double dooor, 415V AC, IP-43, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 amps as incomer and MCB SP as out going all as directed.

S&F in repairs for MCB TPN, 240 volts, AC, 40/63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and directed.

S&F in repairs for MCB, DP/SPN, 240 volts, AC, 40/63 amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed.

All as per the description srl item No 115 above but 16 to 32 Amps

S&F in repairs for MCB SP, 240 volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and directed.

S&F in repairs for MCCB 4 pole, 415 volt, AC, 63 amps, fixed type, suitable for load line DB/LT PB connection complete all as specified and directed.

All as per the description srl item No 118 above but 100 amps, 25 KA

M&L in replacement for box type board made out of polycarbonate, including fixing with 5 amps switch & socket complete all as specified and directed.

M&L in replacement for box type board made out of polycarbonate, including fixing with 5/15 amps switch & socket complete all as specified and directed.

S&F LED batten type fitting for surface/wall mounted 20/22 W, 230V, CDL/Warm type integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws, gutties etc and removing the unserviceable fitting and all as specified and directed. Make:- Everead Cart part No LEDBTA02016-02/ Havells Cart part No LUMILINEPLUSPROBS20WLED865S PCSSIND/Philips Cart part No BN170CLED20S6500PSUL120

S&F LED batten type fitting for surface/wall mounted 9/10W, 230V, CDL/warm type integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws, gutties etc and removing the unserviceable fitting and all as specified and directed.

S&F surface/recess mounted LED panel type 36W, 230V complete with driver full window glarefree opal diffuser LED panel of size 2ft x 2ft with CRCA powder coated white housing, CDL / warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed. Make:- Eveready Cat part No LEDPLB03616-03NS/ Havells Cat part No VENUSTREND2x2PLR36WLED865SWH/ Philips Cat part No RC380BLED36S-6500G6L60W60PSU0DS1

S&F indoor decorative wall light fixture suitable for 10W LED lamp, 230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used, globe shape, including LED lamp 10W warm/CDL type and remove the unserviceable fittings and all as specified and directed.

S&F in repairs of indoor decorative aesthetically designed wall bracket light fixture, cylindrical/round shape, fixed on wall with the help of screws including complete all as specified and directed.

S&F in repairs of LED bulb 5/7W, warm/CDL type suitable for fixing in threaded type holder complete all as specified and directed.

S&F lighting fixture wall mounted LED bulk head luminaire 10W, 230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting brackets & accessories as required with connections and remove the unserviceable fittings and all as specified and directed. Make:- Eveready Cat part No LEDBK01015-02/ Havells Cat part No RUGBYGENXFTS10WLED865SSY MBOPC/Philips Cat part No WT202WLED10SCWPSUS3PC

S&F indoor recessed/surface type mounted LED iuminaires round/square type light weight plastic body downlight fitting 12/15 watt, CDL/warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed.

S&F indoor recessed/surface type mounted LED iuminaires round/square type light weight plastic body downlight fitting 5/6 watt, CDL/warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed. Make:- Eveready Cat part No LEDDNR00616-01/ Havells Cat part No ZIVAFLRDDLR6WLED857S/ Philips Cat part No DN495LED6S6500PSUWH

S&F indoor decorative 4/5W LED type bed side light fittings with all accessories 3 core copper wire for connection and remove the UNSV fittings and all as specified and directed.

S&F in repairs for LED type IP 66, bush light with die cast aluminium having with toughened glass 9W including fixing arrangements complete all as specified and directed.

M&L for making hole as required for fixing of exhaust/ventilation fan size 150mm to 380mm with necessary civil work, alteration in exist ventilation window of iron/aluminium frame as per site requirement complete make good the wall/ventilation window match with exist complete all as specified and directed.

M&L for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised Iron wire of 4mm dia as earthing lead upto the body of the equipment by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate, including excavation and earth work in any type of soil , returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2009 (Part-I) complete all as specified and as directed .

Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and replacing the defective parts. descaling with acid washing and reassembling after cleaning and replacing defective parts and re-installing the same in original position with fastner nut and bolts and making necessary electric and water supply connection and testing complete all as specified and directed. Note:- Spare items shall be measured and paid seperately as supply only under relevant items.

Supply only geyser inner water tank 25 ltrs capacity steel body/glass line coated tanks with nut and bolts as per sample ,duly tested complete all as specified and directed.

Supply only of Hheating element capacity 1.5/2 KW round/ triangular ISI marked suitable for geyser as per sample complete all as specified and directed.

Supply only thermostat suitable for 25 ltrs capacity geysers as per sample complete all as specified and directed.

Supply only heavy duty hot water connection, stainless steel rope threaded type with brass unions, neoprene washers at both ends, 45cm long 15mm bore complete all as specified and directed.

Supply only cold water connection, PVC connection with brass unions, neoprene washers at both ends, 45cm long 15mm bore complete all as specified and directed.

Supply only replacement of safety valve/pressure release valve for geysers of any type/capacity.

Supply only indicator lamp red/green suitable for geyser geysers of any type/capacity.

Supply only geyser base plate/apparatus assembly of any capacity any model complete all as specified and directed.

Supply only geyser top and bottom cover any capacity any model complete all as specified and directed.

S&F in replacement of glass wool heat resistance thermal type/heavy duty puf insulation glass wool of exist type 8 kgs for 25 ltrs capacity geysers complete all as specified and directed.

M&L soldering/brazing inner geyser tanks 25 liters capacity with brass solder and refixing after testing the leakage complete including replacement of rubber packaging ring heat resistance type complete all as specified and directed.

S&F in repair industrial type two pin and earth plug top 20 amps complete all as specified and directed.

S&F in repair industrial type socket base assembly 20 amps complete all as specified and directed.

S&F in repair of 300mm, 1400 RPM, exhast fan witlh louvers including frame, blades complete and unserviceable exhaust fan shall be deposited in E/M store yard. Make:- Crompton - EXHD300-4-1 (ISI)/Orient -300mm Heavy Exh (1400 RPM) - Grey/Havells - 300mm Heavy Duty Exh (1400 RPM) or equivalent as approved by GE

S&F in repair of 400mm, 1330 RPM, wall mounting fan oscalating type complete and unserviceable fan shall be deposited in E/M store yard. Make:- Crompton/Orient/Havells or equivalent as approved by GE.

S&F in repair of 200mm dia, 1330 RPM, fresh air fan with plastic louvers including frame complete all as specified and directed. Make:- Crompton/Orient/Havells or equivalent as approved by GE.

S&F in repair of 300mm dia, 900 RPM, fresh air fan with plastic louvers including frame complete all as specified and directed. .

Taking down ceiling fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser, flexible connection wire, down rods, canopies, minor spares, painting and re-winding all as specified and directed. Note:- Rubber bush, gun metal bush, bearing, capacitor, twin core twisted copper flexible wire, down rods, canopies, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included.

Rewinding of burnt winding from the stater of the ceiling fan any sweep with matching gauge and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer's design and reassembling the same complete testing all as specified and as directed.

Painting of ceiling fan with set of blades of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Taking down exhaust/ventilation fan of any sweep by unscrewing nut/bolts from its position high rise bldgs up to 8 storey height and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser, flexible connection wire, louvers, shutters, painting, minor spares and re-winding all as specified and directed. Note : Rubber bush, gun metal bush, bearing, capacitor, twin core twisted copper flexible wire, louvers, shutters, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included in quoted rate against this item.

Rewinding of burnt winding of the exhaust fan 300mm / 380mm dia with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing, heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

All as per the description srl item No 157 above but ventilation fan up to 200mm sweep.

Painting of exhaust fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Supply only for ball bearing number of 6201 to 6204 as required.

Supply only for rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan complete all as specified and directed.

Supply only for PVC holder for condenser housing complete all as specified and directed.

Supply only for twin twisted copper flexible wire size of up to 0.5 sqmm complete all as specified and directed.

Supply only capacitor 0.8/1 mfd, 240 volts. (Make/Model- as per sample)

Supply only capacitor 2.5 Mfd, 240 volts.(Make- Tibcon /Havells/ Epico)

All as per description srl item No 165 above but 3.15 mfd.

Supply only PVC canopy for ceiling fan.

Supply only down rod for ceiling fan 1'/2' length, down rod colour match with exist fan to any height complete all as directed.

Supply only for ventilation fan motors suitable for 200mm sweep complete all as specified and directed.

M&L for ceiling fan blade suitable for 1200/1400mm sweep for complete all as specified and directed.

S&F in replacement louvers with shutter metallic body suitable for single phase 240 volts AC heavy duty exhaust fan upto 450mm sweep with necessary fixing accessories after taking down existing all as specified and directed. Note:- Louver shutter are to be replaced up to high rise bldgs 8 storey including all necessary T&P and fixing accessories etc.

S&F in replacement louvers with shutter plastic body suitable for single phase 240 Volts ventilation fan 200mm sweep with necessary fixing accessories after taking down existing all as specified and directed. Note:- Louver shutter are to be replaced up to high rise bldgs upto 8 storey, including all necessary T&P and fixing accessories etc.

M&L for exhaust fan blade metal body suitable for 300/380/450mm sweep for exhaust fan complete all as directed.

M&L for ventilation fan blade PVC type suitable for 200mm sweep complete all as directed. Note:- All above items for work portions of buildings upto seven storeys height complete.

S&F of new geyser 25 ltr capacity 5 star rated, 230V, AC in wall with suitable size nut bolts and washers complete and unsv geyser depositing in E/M store yard all as specified and directed. Make:- Racold-Omnis R/Orient-Urja+25 Ltr/Havells- GHWAMGSWH025

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep min air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor (BLDC) and unservicealbe geyser depositing in E/M store yard all as specified and directed. Make:- Havells Model No Efficiencia Neo (BLDC 26W)/Orient Model Ecotech Neu/Crompton Energion HS

MK Enterprises (BID ID -3399466)

R B ENTERPRISES (BID ID -3406467)

Shiv Enterprises (BID ID -3406466)