PROVN OF 09 NOS OR BATHING POINTS WITH SHED AT VARIOUS LOCATIONS IN ARTY CENTER HYDERABAD FOR AGNIVEERS UNDER GE GOLCONDA

Amount

Excavation in trenches n.exc 1.5m wide & n. exc 1.5m deep for foundaton etc or for manholes, pier holes etc n.exc 10 sqm on plan and getting out in hard and dense soil complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as specified and as directed.

M & L for PCC type D2 1:4:8 (40mm grade aggregates) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of stone surface of walls finished even and smooth without using extra cement complete all as specified and as directed.

Spreading & Levelling and well ramming including watering as required in layers n.exc 25 cm thick complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed.

M&L brick work with fly ash bricks built in CM 1:4 straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

M&L for providing, cement concrete 1:3:6 Type C1 using 20 mm graded aggregate as in coping complete all as specified and as directed.

M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing complete all as specified and as directed.

S & F for Steel work in tubular trusses & vertical post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and as directed.

S&F MS Plain plates, square cut, with riveted, bolted or welded attachment Fe-410-W (Gde-E-250) quality A complete all as specified and as directed.

M & L for Two coats of synthetic enamel paint to new steel surfaces over 10cm width or girth including preparation of new surfaces and one coat of red oxide primer complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of walls finished even and smooth using extra cement complete all as specified and as directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for three coats of white wash on new surfaces of walls including preperation complete all as specified and as directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface complete all as specified and as directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces complete all as specified and as directed.

M&L for reinforced Cement Concrete 1:2:4 (using 20 mm graded aggregate) nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like complete all as specified and as directed.

M&L TMT bars, 10mm dia & over, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed.

M&L TMT bars, 6 to 8 mm dia cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) and surface even and smooth using extra cement complete all as specified and as directed.

M & L for 75 mm thick Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even aned smooth without usisng extra complete all as specified and as directed.

Supply & fixing galvanized steel water tubing medium grade with BIS/ISI Marked with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc of size 15mm dia complete all as specified and directed.

All as per Item No. 30 here in before but 20 mm dia.

All as per Item No. 30 here in before but 25 mm dia.

S & F for gun metal 25mm bore dia of pipe globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

All as per Item No. 33 here in before but 20 mm dia.

S&F for rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (Triple layers) (cylinderical vertical with closed top) hoisted and fixed in position including ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 25mm bore pipe complete all as specified and as directed.

S & F for 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F for 110 mm PVC (SWR) bends complete all as specified and as directed.

S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

PVC (SWR) floor trap 75mm dia, plain with gratings including jointing with solvent cement complete all as specified and as directed.

S & F for 75 mm PVC (SWR) bends complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

Cutting existing steel tubing of size 50mm/40mm dia for alterations or additions (Each cut measured)

Screwing existing steel tubing of size 40mm/50mm dia for alterations or additions (or lengthening screw on pipe to form connector)

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm, 2 Core including taking up or down existing service wire complete all as specified and directed.

Supply and spread approved robo river sand/M Sand for cable cushioning laid in trenches including watering and consolidation complete all as all as specified and directed. Note:- Punned thickness shall be measured and paid.

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick,masonary walls, roof etc including MS sunk box of required size & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification, complete all as specified and directed at site. (Note: Cost of chase cutting is deemed to be included in rate quoted)

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

Supply and fix Ceiling rose surface bakelite three 65x50 mm, terminals 240 volts complete all as specified and directed.

S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 2 Ways, double door complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB including connection, testing and commissioning complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point including removing existing earthing complete all as specified and testing on completion.

NAVANAND ENTERPRISES

STANDARD AGENCIES

M/S Veerabhadra Constructions

M/s cogent constructions

Amutha Constructions

GNV Engg Services

SANJEEV CONSTRUCTIONS

BUILDWEL

UNITED TECHNO PROJECTS PVT LTD