WBSIDCL/39 Elec of 2025-26 Sl 1

TOTAL

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending gooddamages to original finish.

Average run 8 mtr

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A,TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 16 A TPN/FP MCB breaking capcity.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4 X 16 sq. mm + 2 X 10 sq. mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha)

2 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

4 Module

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

25mm size

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment.

2+8 way Enclosure Legrand/ABB/Siemens/Schneider

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

6 way Enclosure Legrand/ABB/Siemens/Schneider

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & ending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment upto 100A Legrand/ABB/Siemens/Schneider

4 way Enclosure Legrand/ABB/Siemens/Schneider/L&T

8 way Enclosure Legrand/ABB/Siemens/Schneider/L&T

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

63A Legrand/ABB/Siemens/Schneider

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6-32 A SP Legrand/ABB/Siemens/Schneider

6-32 A DP Legrand/ABB/Siemens/Schneider

6-32 A TP Legrand/ABB/Siemens/Schneider

Legrand 6-32 A FP Legrand/ABB/Siemens/Schneider

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

3.5 Core upto 25 sqmm

50 mm dia G.I. Pipe for cable protection (medium class)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 core x 10 sq. mm. XLPE, Al. armoured cable.

4 core x 35 sq. mm. XLPE, Al.armoured cable.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.

100x50x1.25mm (18SWG) With out angle iron support

150x50x1.25mm (18SWG) With out angle iron support

300x50x1.25mm (18SWG) With 25x25x3mm angle iron support

600 mm width X 50 mm depth X 2.0 mm thickness

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.

100x50x1.25mm (18SWG)

150x50x1.25mm (18SWG)

300x50x1.25mm (18SWG)

600 mm width X 50 mm depth X 2.0 mm thickness

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

For 30 cm (12") Exhaust fan

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip(4 Mts. long), 20 mm dia x 125 mm long galvanized bolt,double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: TATA-Medium GI pipe

Supply & lowering of 5 H.P Submersible Pump Motor set suitable for 415 V, 50 Hz., 3 phase Power supply in existing borewell by helping tripode & allied accessories as per direction by the EIC as per site condition. (Make: KSB [Model: BPD273/05A+UMAI150-6/22]/Kirloskar/ Crompton)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) : 50 mm dia. medium quality

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.): 50 mm dia (Make: Approved by EIC)

Supply & fixing C.I. 50 mm check valve. (horizental) GM tested to 21kg/sqcm(Make: Approved by EIC)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supplying with fitting fixing of luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.

12W LED recessed/surface mounted lighting fixture comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=1200 Lumen, similar to Havels VIBEFLRDDLR12WLED8575 as per approved make. Make: Havels, Philips

20W LED surface/suspended mounted batten comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=2000 Lumen similar to Havels Lumiline Neo BS20WLED865 or equivalent as per approved make. Make: Havels, Philips

160W LED surface mounted/suspended high bay lighting fixture comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=16000 Lumen similar to Havels Gazella HBP150WLED857 or equivalent as per approved make.

A.C. Exhaust fan of 200 mm sweep complete with all accessories similar to Havels Ventil Air DX 200 or equivalent as per approve make. Make: Havells, Orient,Anchor

A.C. Wall Bracket fan of 600 mm sweep heavy duty complete with all accessories similar to Havels Turbo force wall 600 (FHACWSTSCL24) or equivalent as per approve make. Make: Havells, Orient,Anchor

SITC of LED based Street light, housing made up of Pressure Die Cast Housingwith PC difusser,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 120 lumen/Watt and a minimum system lumen output of 5400 lumens and maximum system wattage of 80 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=07.The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=4KV, PF >0.9 , and SDCM<5. The driver should be BIS approved, fully potted and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V) and Auto Restart function should also be available within the fixture..The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Warranty: Warranty and maintenance assurance certificate for atleast 5 (Five) years. (Model no-CRP-411-90-30-SL-GL-NSG or equivalent) Make: TRANSRAIL/WIPRO/CROMPTON or equivalent as approved by EIC

Supply of delivery of 8 mtr high hot galvanised octagonal pole, continously tapered (bolt fixing type) in single section made out of 4mm thick sheet suitable for bracket having top dia 70 mm and bottom dia 130 mm, base plate size 200X200X12 mm with door and locking arrangement complete with minimum 1 mtr long MS/GI street light bracket, bakelite sheet,neutral link, suitable MCB or any other electrical accessory,suitable foundation bolts of diameter 20 mm,700mm apprx length, "J" type,4 pcs set. Make : Make: Bajaj / Transail / Volmont as approved by EIC

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Column 450x450 mm and base foundation 1200x1200 mm) Above 6.5 metre and upto 8.0 metre

Supplying of following 1100 volt grade XLPE insulated PVC inner sheathed and FRLS PVC outer sheathed coppe conductor cable as per specification. Make: KEI, Gloster, R R Kabel 3 core x 1.5 sq. mm. Cu. Flexible cable.

Supplying and laying 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply, Installation, testing & commissioning of compartmentalized type Lighting / Power Distribution boards as per Drawing, Specification. The unit rate shall include loading/unloading, shifting from site store to the place of installation, assembling the Panel including mounting & wiring of loose parts by manufacturers, interconnection of shipping sections, installation on readymade Cable trench (provied support for panel mounting) or directly on floor, assembling of loose accessories supplied by the manufacturer, wiring & connection of auxiliary circuits, installation, testing & commissioning of all Panel, supply of all necessary hardware. Aligning, levelling, grouting, testing and setting of relays and meters including all.

Sub Main Distribution Board (SMDB) with MCCB as incomer and MCCBs as outgoing devices (Make: L&T,HAVELLS,ABB) Conforms to IEC 61439-2, DEKRA and ASTA certified Rating up to 630 A Short-time withstand current: 250A & 400A SMDB - 36 kA 1s 630A SMDB - 50 kA 1s, Ingress protection - IP 43 Choice in number of outgoing ways - 4, 8, 12 and 16, Ready to use, off the shelf solution Metering & cabling extensions are available as accessories, SMDB - TN630D, O/G 100A 12 ways, Cat. No.-DA60D1124CZZ0

Supplying of following 1100 volt grade XLPE insulated PVC inner sheathed and FRLS PVC outer sheathed copper/aluminium conductor armoured cables as per specification. Make: KEI, Gloster, R R Kabel

4 core x 35 sq. mm. XLPE, Al. armoured cable.

4 core x 185 sq. mm. XLPE, Al. armoured cable.

Supplying and making end termination with brass compression gland and Tinned Copper lugs for following size of PVC insulated and PVC sheathed / XLPE coopper conductor cable of 1.1 KV grade as required.

4 core x 185 sq. mm. XLPE, Al. armoured cable.

Supply, Installation, testing & commissioning of compartmentalized type Lighting / Power Distribution boards as per Drawing, Specification. The unit rate shall include loading/unloading, shifting from site store to the place of installation, assembling the Panel including mounting & wiring of loose parts by manufacturers, interconnection of shipping sections, installation on readymade Cable trench (provied support for panel mounting) or directly on floor, assembling of loose accessories supplied by the manufacturer, wiring & connection of auxiliary circuits, installation, testing & commissioning of all Panel, supply of all necessary hardware. Aligning, levelling, grouting, testing and setting of relays and meters including all.

Incoming: 1 No. 32 amps 4P MCB each with following accessories : ii) Phase indicating light shall be protected by 2 Amps MCB’s. - 3 Sets

Busbar: 63 Amps TPN Aluminium bus bars with heat coloured shrinkable insulation sleeve. - 1 Set

Outgoing: i) 10 Amps 4P MCB, 10 Amps contactor, Analog Timer with 3 nos 10 Amps TP MCB in each outgoing- 1 Nos. ii) 10 Amps 4P MCB, 10 Amps contactor, with 3 nos 10 Amps SP MCB in each outgoing- 1 Nos. iii)32 Amps 4P MCB, 32 Amps contactor, with 3 nos 25 Amps SP MCB in each outgoing- 1 Nos. iv)32 Amps 4P MCB - 2 Nos.

Notes:- a) Incomer MCB's shall be of 25 kA (Ics) and rest shall be 25 kA(Ics)breaking capacity in Panel b) All MCB's shall be of 10 kA breaking capacity.

Panel described as above

Supplying of following 1100 volt grade XLPE insulated PVC inner sheathed and FRLS PVC outer sheathed copper/aluminium conductor armoured cables as per specification. Make: KEI, Gloster, R R Kabel

4 core x 10 sq. mm. XLPE, Al. armoured cable.

4 core x 35 sq. mm. XLPE, Al. armoured cable.

Supply and installation of ESE Air Terminal: External, wide area, early streamer emission (ESE) type lightning arrestor made of robust high grade stainless steel . It should be self sustaining, with 4.8V Ni-MH battery and in full compliance of the Protection Radius worked out as per Rolling sphere concept & test Standard stated in NFC 17 102 Appendix C . It should be capable of polarizing the tip with a voltage of 20 KV to 30 kV, synchronized with an approaching lightning and triggering a powerful upward streamer into the air, with average time gain of 25 microseconds earlier than naturally formed streamers. The lightning arrester must be able to be tested with the help a handheld TELETESTER for checking its condition and operativeness and must be type tested in CPRI (Govt. of India laboratory). Reference no. PDASAT3N25 (Protection level 42 mtr as per protection level I).The TELETESTER should be able to communicate with the lightning arrester by radio communication 433 MHZ/FM ,range of 100 Mtr in free field. Reference no.TESTS3N (Supplied alongwith the ESE lightning arrester) DUVAL MESSIEN Make SATELIT 3-25 (Protection level min 42 Mtrs as per protection level I ) or Equvalent as approved by EIC

Supply and installation of Support Mast: Support mast of 3 mtr of robust design, made with 40 mm dia. class C MS pipe duly galvanized with minimum 85 micron zinc coating, along with all accessories like clamps, saddles, holding arrangements to fix the mast to the building/structure at highest point

Supply and installation of Down Conductor : Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection Air terminal to the earth pit including clamps, saddles incl. drilling holes, with bolts, nuts, washers etc. and other required accessories.

Supply and installation of Maintenance free Earthing: The earth terminal shall consist of 3 separate earth pits for each down conductor,in delta or crowfeet configuration as per site condition. Unit Rate quoted is for one set The earthing will be maintenance free chemical earthing using copper coated steel rods 16 mm dia , 2.4 mtr long and using ground enhancing, artificial soil treatment chemical compound, Terec+ ,having essential chemical ingredients, such as ‘ionic chemicals, dispersion chemicals, expansion chemicals, diffusion chemicals and hygroscopic chemicals, to provide stable low resistance in the earth terminal to make it maintenance free for over 15 years as per IEEE 80-2000 14.5d clause.

Supply and Installation of Testable Flash Counter. It should be Electromechanical current tested (10/350 microsecond) 100 KA, should have a 6 digitindicator, the enclosure material should be high grade engineering plastic and degree of protection should be IP67 (Make: Paratonex or equ. as approved by EIC).

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary.

Supply of 7/14 SWG stranded stay wire

Supply of Rag bolt for stay

GI flat iron clamp and bolt

Supply & fixing of 5 HP Submersible Pump Starter panel suitable for Submersible/Monoblock Pump Motor set including Volt meter, Amp. Meter, start & stop switchs with indicator lamp and single phase preventer & thermal over load complete wiring & connection and allied accessories as required. (Make: L & T cat no. CS94091SONO)

Supply & fixing of pressure gauge with Syphon Bends. (Make: Approved by EIC)

Supply & fixing of nylon rope (10 mm) with submersible pump motor set safety purpose.

Supply & fixing of C.I. clamp with necessary nuts, bolts, washers & lock nuts etc. for holding the column pipe.

Supplying, fitting and fixing G.I. cap at top of the tube well.(300 mm)

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required: 32 mm dia

Supply & fixing of 1100V grade 3 core 2.5 sq.mm PVC insulated and PVC sheathed cable with electrolytic grade annealed copper conductor flat cable for submersible pump motor from starter panel to sbmersible pump motor set at borwell as directed by EIC in underground trench as under GS. (Make: MESCAB/Finolex/Havells/Glowster)

Supply of G.I Flange with suitable arrangement & necessary nuts, bolts & washers.

Supply & Fixing of angle iron frame fabricated from 50mmX50mm MS L angle with cross angle & redial support including six numbers 6inchesX6inches x10 mm MS base plate for fixing on the structure with all necessary welding & fabrication. the structure shall be proper welding as per instruction of E.I.C including painting as directed by E.I.C 72 sq.ft.

Supply & Installation of M.S. structure duly fabricated & welded by 50 mm x 25 mm 18g M.S. square pipe ISI mark with red oxide duly welded size as per approval to be made such a manner that it can be opened towards up direction for taking maintenance.

Supply and fixing ACP back lit LED sign board made 3 mm thick ACP sheet(Alstone/aludecor/Timexbond) finished with approved metallic colour as back ground(Signal Blue) after router cutting. The riser structure also shall be covered with ACP sheet.(Front side & back side ACP sheet) (including 4 side are moulded by ACP)

Supply & Fixing special type of imported 3 mm thick acylic sheet having dimention of 375 mm dia Biswa Bangla & National Emblem on ACP board with projection of 50mm

Supply & Fixing special type of imported 3 mm thick acylic sheet having dimention of 375 mm dia WBSIDCL industrial logo on ACP board with projection of 50mm.

Supply and fixing special type of imported acrylic letter (3 mm thick) projected on the ACP board 50 mm. The letter font shall be in horizontal line.

Supply and fixing special type of imported acrylic letter (3 mm thick) projected on the ACP board 5o mm. The letter font shall be in horizontal line with vinyl cutting pasting letter, having dimention (For official website and email)

S&F 230V,1.08 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Powered by Samsung / Aries)

S&F 230V,1.50 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Samsung / Aries / GOQ powered by Samsung)

S&F 230V,.75 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Powered by Samsung / Aries)

S & F water proof 200 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make).

S & F water proof 300 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make).

S & F water proof 400 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make).

Supply And drawing 2 x1.5 sqmm. copper wire for LED module connection and SMPS connection.

Supply and fixing 25 mm x 25 mm alumminium channel having length 18'

Making brick foundation 4:1 cement motor having dimension 250mmX250mmX500mm with necessary plaster cement finish as per direction of EIC.

Transportation cost for taking away the LED sign board from Company's workshop to work site incl loading/unloading .

Supply, Laying 2 core 10 sq mm XLPE Ar/Al cable in underground trench 460mm (1'-6") wide x 760mm (2'-6") average depth with brick protection on the top of the cable with 8(eight) nos. Brick per meter, incl. filling the space between the brick and cable and also the trench with shifted soil, levelling up and restoring surface duly rammed.

S&F Compression Type brass cable gland as to GS as follows:

2 Core 10 sq.mm. PVC Al. armoured cable

S&F finishing end of the cable socket by crimping method as to GS as follows:

2 Core 10 sq.mm. PVC Al. armoured cable

Please Enable Macros to View BoQ information