REPAIR MAINTENANCE AMC OF VARIOUS LIFT AND CONNECTED WORKS AT KWC AND METCALFE HOUSE UNDER GE I RnD DELHI

Amount

Comprehensive maintenance through OEM for 02 No lift of capacity 08 passangers (544 KG) (Ground + 4 floors) installed at CEPTAM Building M'House including all instruments and controlled complete all as specified and directed. Make of Lift- SCHEINDLER.

Comprehensive maintenance through OEM for 01 No lift of capacity 08 passangers (544 KG) (Ground + 5 floors) installed at ISSA Building M'House including all instruments and controlled complete all as specified and directed. Make of Lift- OTIS.

Comprehensive maintenance through OEM for 01 No lift of capacity 06 Passenger (408 Kgs) (Ground + 5 floors) installed at ISSA Building at M'House including all instruments and controlled complete all as specified and directed. Make of Lift- OTIS.

Supply, Fixing, testing and commmissioning of following spare parts inreplacement through OEM for lift of capacity 08 passangers (Ground + 5 floors) installed at ISSA Building. Make -OTIS in M'House including taking down old unserviceable parts complete all as specified and directed by Engineer-in-charge. (a) Base Module TR IND with AES Bionic 5.4 : 01 No (b) Supply Module TR for TR Controller : 01 No

Supply &Fix inreplacement of ARD Battery for lifts 12 Volts 7AH all all as specified and directed.

Supply & Fix inreplacement of ARD Battery for lifts 12 Volts 12AH all all as specified and directed.

Supply &Fix inreplacement of ARD Battery for lifts 12 Volts 18AH all all as specified and directed.

S&F in replacement of cabin LED light 10Watt as per existing type and as per OEM for lift complete all as specified and directed.

Supply and fixing of lift car fan metalic body 16-30 w rating suitable to match with existing fan's RPM and sweep installed in the lift of make OTIS /Shindler with complete accessories.including taking down old u/s existing fan. Complete all as specified and directed

Supply and fixing of Lift floor landing push buttons suitable for make of lifts OTIS /Shindler. as per OEM make with complete accessories. Complete all as specified and directed

Supply and fixing of car green mat of size 4ft x4ft complete, complete all as specified and directed. Note :- Sample shall be approved by GE before execution.

M&L for fixing in replacement of unserviceable ARD ( automatic rescue device) card including all connected accessories suitable for make of lifts OTIS /Shindler) .complete all as specified and directed.including taking down old u/s device. complete all as specified and directed.

S&F in repair synthetic insulating mat of size 2.0 m x 1.0 m x 25 cm complete all as specified and directed.

S&F in replacement of LOP ( Lift operating panel) as per OEM make of lift OTIS/Shindler with complete accessories all as specified and directed.

S&F in replacement of LOP up down button as per OEM make of lift OTIS/Shindler with complete accessories all as specified and directed.

S&F in replacement of SWR Rope 10/12 mm dia & Existing length for lifts complete all as specified and directed.

M&L for removal of dust, stain, marks scratches on the stainless steel surface of car cabin including ceiling and carry out the scrubbing, polishing and buffing of stainlress steel surface with the help of stainless steel liquid polish and buffing tools to give glossy and clean finish to lift cabin surface of 8 and 13 passengers complete all as specified and directed.

All as per item No 16 above but for car door/Landing doors for cleaning and finishing to doors and facia surface of doors.

M&L for painting of lift landing door/car door mild steel surface incl preparation of old steel surface of door and cabin girth and applying two coats of synthetic enamel Duco paint (1st grade quality) by spray painting incl making good all distrubed surface of door of 08 and 13 Passengers lift complete all as specified and directed.

Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip shall be laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly be tightened on GI watering pipe and embeded in PCC earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

M&L Galvanised iron strip 25x4mm buried in ground including necessay excavation & earth work in soft/loose soil and removal of excavated naterial not exc 50m and depositing where directed. complete all as specified and directed.

Comprehensive maintenance of lift including carrying out and periodical services of OMEGA ELEVATORS Make automatically passenger lift suitable for 8 Persons (544 Kg) installed at "Director Building" for 3 floors (Ground+2) complete with repair/replacement of unserviceable parts.

NOTE :- for Item Ser No 1 to 3 and 22 (a) The Comprehensive maintenance work of lift shall be carried out by OEM only It is an express condition of the contract that tenderers submit upload an MoU with the OEM i.e SCHEINDLER, OTIS and OMEGA Elevators post acceptance of tender within 15 days. (b) The maintenance records for maintenance schedule will be maintained by the Contractor. (c) The Contractor will maintain lift in good working conditions without breakdown. The tenderer is advised to maintain the rigorous maintenance schedule to avoid any breakdown and send the maintenance personal regularly and also store the spare parts (Spare parts should be as per OEM's specification) so that any breakdown is attended promptly. (d) The comprehensive maintenance schedule rate includes all the spare parts/defective equipment’s including consumable which are required for satisfactory maintenance of the Lift as per specification of SCHEINDLER, OTIS and OMEGA Elevators. The Contractor shall not be paid anything extra for these parts/equipment’s and also to bear all the defects arising during the period. ( e) Service the lifts at regular intervals and as frequently as the company deems necessary based on the nature and condition of the elevator, The lift should be maintain in safe and proper working condition. (f) Renew all wire ropes and chains (Where fitted) as often as required to maintain an adequate factor of safety, to equalize the tension on all hoisting ropes, repair or replace conductor cable and hoist way and machine room elevator wiring. (g) Replace the gear and motor bearing with necessary manufacturer recommended lubricants whenever necessary and allm parts of the lift will be checked, cleaned and lubricated to keep them both mechanically and electrically in perfect working condition.

MB Enterprises