Renovation work of Inspection house, two no. office of A.E., two no. office of Jiledar and residencial buildings of Gandak colony Hata in district Kushinagar

Amount

Renovation work of Inspection house, two no. office of A.E., two no. office of Jiledar and residencial buildings of Gandak colony Hata in district Kushinagar.

Dismentaling door and window chaukhat with hold fast including stacking material with 60 m.

Dismentaling C.C. or Brick or granolithic floor including base concrete and including stacking of dismentled materials with an distance of 60 m as per direction of engineer in incharge.

Dismentaling Brickwork or stone work andcement concrete in lime or cement mortor and including stacking of materials with an distance of 60 m as per direction of engineer in incharge.

Dismentaling existing plaster including disposal of refuse with in distance of 60 M.

Dismentaling reinforced cement concrete or reinforced brick work including stacking of dismentaled material as directed by engineer in charge within in 60 mdistance.

Earth work in column foundation including digging and refilling the trenches with its proper disposal within 30 meters lead and 1.50m lift with all T&P etc.

Earth filling from G.L. to plinth level including loading unloading, filling, leveling, watering compacting and dressing with all T&P etc.

Local Sand filling in plinth with cost of materials and cartage with all labour, T&P etc.

Cement Concrete with 40mm gauge Ist class Brick ballast, coarse sand and cement in proportion of 1:4:8 in foundation including cost of all materials, labour and T&P etc.

Flooring, Base cement concrete 1:3:6 cement, coarse sand and 20mm stone grite

Flooring 40mm thick 1:2:4 cement, coarse sand and 20mm stone grite including cost of all materials, labours, T&P etc.

Providing and fixing glass strips 4mm thick and 40mm deep in joints of pannels of floor at the time of laying floors flush to the finish level of floor including cost of all materials, labour and T&P etc.

Centering and shuttering for R.C.C. work including all cost of materials,T&P labours and other accessories required for proper completion of work.

R C.C. work in (M-20) coarse sand and dala grit (10mm to 20mm.), including all cost of materials,T&P and labours and other accessories required for proper completion of work

Reinforcement work with cutting, bending and binding of steel (Fe 500 HYSD Bar) and placing in proper position including cost of all materials, labour, T&P etc.

12 mm thick cement plaster in proportin of 1:3 finished with a floating coat of neat cement of mix (on roof)

Brick work in 1:6 Cement morter i/c all Material, labour, T&P etc for proper complition of work in superstructure (using 40% old dismentled brick).

Brick work in 1:6 Cement morter i/c all Material, labour, T&P etc for proper complition of work in superstructure.

1st class brick work in 1:4 cement mortar including all cost of materials,T&P and labours etc.(Using 40% old dismentled brick)

Febrication supply & fixing of MS iron angle 45x45x6 mm in chaukhat for door,window & ventilator including MS flat iron etc. & 3mm thick gusset plate at cornerand junction including supply of steel cutting drilling holes bending , Moduling required shape &welding supplyed fixing of neccesary hing for door 125 mm of 14 guage size window and ventilator 100 mm , 16 mm guage size with cleat & stoppers etc.

Providing and fixing in position factory made precast RCC M-40 fixing with hold fast embedded in 1:3:6 concrete block for doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 mm M.S stirrups placed @200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no pecially designed M.S.galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for ecieving sliding door bolts and tower bolt etc. all complete, as per the drection of Engineer-in-charge. The frame shall be measured in running meter correct to two places of decimal

Apply priming coat over new steel and other metal surface after i/c preparing the surface.

Painting first coat over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with supriour synthetic enamel standerd.

Supply and fixing galvanized mosquito heavy quality iron wire gauge of expanded metal heavy quality our windows and including C.P.teak wood battens 30mmx100mm with servers and including supply of all in materials,labour and tools plants etc.required for proper completion of work.

Supply & fixing of flush door and window comercial quality confirming to IS 2202 part 1 (1983) including fixing of wooden cleat and stoppers.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

12 mm thick plaster in 1:4 cement sand morter including all for complition of work.

Providing and applying Wall putty of 2 mm thickness(2 coat) over plastered surface to prepare the surface even and smooth complete

Apply one coat of cement primer of approved brand and manufacture on wall surface .

Distemper Two coat with oil bound distemper with approved brand manufacture and required shade including cost of all materials.

Finishing wall with acrylic smooth exterior paint Two coat of requried shade.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Supply and fixing 6 mm china white glazed tiles in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortor finished white cement slury i/c of all materials labour and T&P.

Providing and Laying of factory made 80mm thick rubber moulded interlocking cement conc tiles(30 mpa) including 25 mm thick compacted bed of fine sand .

Providing and Laying of dry brick ballast 100 mm for interlocking tiles

Mild steel or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. wrought to required form, including drilling holes riverting or welding where necessary & their fixing,including Painting Two coat with priming coat on steel and other metal surface with superior synthetic enamel standard make brusing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter required for proper completion of the work.

Finishing wall with water proof cement paint of approve make and quality on new work with two coat to give an even shade. Including supply of material, labour, T&P etc. required for proper completion of the work.

Precost concrete round septic tank (10 user) with instalation.

Providing and fixing 100 mm dia Sand cast iron Pipe for inlet and outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting & making good the walls and floors.

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, alongwith 1no 4sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

P/F 10.00 sq.mm ISI Marked FRLS PVC insulated single core copper conductor cable.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs tobe used in non residential buildings)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 8 way , Double door

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 12 way , Double door

Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required.

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.40 A

Supply, Installation, Testing and Commissioning of LED Bulkhead luminarire with a system lumen output not less than 700 lumens and a minimum system efficacy of 105 lumen/watt. The luminaire shall have a wattage <6.5W, 6500/5700 K, CRI >80, rated voltage 140-270 volts, Housing should be extrusion Al./die cast Al/CRCA with a PC/glass cover., minimum IP65 Protection against dust and water with IK08 , i/c connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as reqd .

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, completeas required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plateetc.asrequired.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular witches in recess etc.as required. 1 or 2 Module (75mmX75mm) BOX

Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

Supplying and fixing factory wire H.P.F. street light florescent tube light fitting suitable for 1X40 watt florescent tube etc, on G.I. bracket complete in all respect of Philips/Bajaj/G.E.C./ Crompton make .

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (TV wire)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. viterous china flushing cistern & CP flush bend with fitting and CI Brackets, 40mm flush bend, overflow arrangement with special of standardmake and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back urinal of size 580x380x350 mm with 5 litre,PVC flushing cistern, flush pipe,C.I. trap and grating complete in all respect.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (630 X 450 mm.)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board (510x1040 mm bowl depth 250 mm)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid 40 mm Dia

P/F 600 X 400mm leveled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestors sheet ground fixed to wooden cleats with C.P. brass screws and washers

P/F in position C.P. brass towel rail complete with brackets including gchases in wall and repairing the same in 1:3 CM complete. Size - 750 X 20 cm.

Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. Brassscrews.

P/F C.P. Brass toilet paper holders including cost of all materials, labours T&P etc.

Providing & fixing soil, waste and vent pipes. 100 mm dia, Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing terminal guard : 100 mm, Sand cast iron S&S as per IS - 3989

Providing and fixing cast iron collar : Sand cast iron S&S as per IS - 3989

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet, Sand cast iron S&S as per IS - 3989,

P/F C.P. jali for nahani trap 100mm dia including cost of all materials

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. (External work)

(A) 40 mm dia

(B) 25 mm dia

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. (A) 15 mm dia (Internal work)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (15 mm nominal bore)

P/F C.P. brass angle valve for cistern , wash basin,Gyeser etc 15mm nominal hole size including cost of all materials, labour T&P etc.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(15 mm nominal dia)

P/F chromium plated shower rose with 15mm or 20mm inlet complete and 100mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Proving and Fixing of 25mm dia ball valve (Brass) of approved quality,high or low pressure with plastic floats.

Fixing 15mm PVC connection, heavy quality with brass Union including supply of all materials, labour T&P etc. required for proper completion of the work.

Supply and instalation india mark II handpump boring with 100mm dia casing pipe,24 m length,32mm pipe GI and pump including lowering, extraction of assembly loading unloadin, carriage with all material & necessary accessories .

Providing and fitting 1 H.P. motar pump with all necessary accessories and all metarial etc all complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.