REPAIRS TO JOINERY, CUPBOARDS,BUILT-IN-FURNITURE, WIRE MESH, AND OTHER B/R SERVICES IN OTM ACCOMMODATION INSIDE MAIN CAMP AT AF STATION TAMBARAM

Amount

Taking down chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and as directed.

All as per item No 1 above but area exc 1.5 Sqm & not exc 4 Sqm all as specified and as directed.

Taking down shutters of any description of area not exc 1Sqm each all as specified and as directed.

Taking down shutters of any description of area exc 1Sqm & not exc 2 Sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and not exc 2sqm each each all as specified and as directed.

Dismantling unframed wooden fillets, rails, posts etc under 40 sq cm in section all as specified and as directed.

S&F second class hard wood plain fillets, square, rectangular in section, wrought, sectional area exc 6 but not exc 13 Sq cm, fixed with screws to wooden frame work all as specified and as directed.

All as per item No 8 above but sectional area exc 13 and not exc 25 sq cm all as specified and as directed.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint all as specified and as directed.

S&F 2nd class Hard wood glazed/skeleton shutters 30mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated without sash bars for securing glass gauze etc all as specified and as directed.

All as per item No.11 here in before but with sash bar

All as per item No.11 here in before but without sash bar 35mm thick door shutters

S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and as directed.

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and as directed.

S&F 100 mm long stainless steel butt hinges for PVC doors all as specified and as directed.

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 75mm type D-22 all as specified and as directed.

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 100mm type B-21all as specified and as directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm all as specified and as directed.

All as per item No. 21 above but fixed in repair

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm all as specified and as directed.

All as per item No. 23 above but fixed in repair

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm all as specified and as directed.

All as per item No.25 above but fixed in repair

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and as directed.

All as per item No.27 above but fixed in repair

S& 250mm size mild steel ordinary rat & tail rod pattern spring (Helical) including roller & roller plate all as specified and as directed.

All as per item No.29 above but fixed in repair

S&F in floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors all as specified and as directed.

S&F in repairs floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors all as specified and as directed.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy of size 250 mm all as specified and as directed.

All as per item No.33 above but fixed in repair

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Cutting holes in to brick wall built in cement mortar exc half brick & not exc full brick and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed.

M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 all as specified and as directed.

M&L for preparing small articles such as hold fasts, end of posts etc. of area not exc 0.1Sqm and treated with Cresote Oil/ black bituminous paint etc all as specified and as directed.

M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but not exc 0.5 sq m each and treated with tar or coat tar black paint all as specified and as directed.

M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 all as specified and as directed.

Dismantling of Mild steel works such as grills, gratings,guard bars of any description all as specified and as directed.

Dismantling of mild steel grills and refixing in the same opening all as specified and as directed.

S&F Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm & fixed with stainless steel wire staples including wooden fillets/beadings, screws etc complete all as specified and as directed

S&F in repairs Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm including wooden fillets/beadings, screws etc complete all as specified and as directed

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and as directed.

S&F 3mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and as directed.

S&F 3mm thick figured/frosted or pin headed glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and as directed.

Cutting out old steel hinges (projecting type) friction/non friction type from existing windows, S&F new hinges and welded, including cutting out and making good the jamb portion where required and applying two coats of synthetic enameled paint over a coat of red oxide primer to hinges and disturbed portion etc. complete all as specified and as directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm 6 Lever all as specified and as directed.

S&F in repairs door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kg all as specified and as directed.

S&F 0.56mm plain aluminium sheeting, alloy 31000 H4 in ridges, hips and straight flashing ( Length and girth as fixed ) all as specified and as directed.

Running welding in repairs not exceeding 6mm thick metal sheets such as dovetailed hinges, peg stay assembly and MS butt hinges etc with steel window and steel frames of doors all as specified and as directed.

Easining / straightening of shutters frame of steel windows of any type making operational and greasing to hinges (welding and painting will be measured separately) all as specified and as directed.

S&F in repairs mild steel plate type steel handle of 100mm size left/right suitable for steel windows with fiber washer tube type including nuts and bolts all as specified and as directed.

S&F in repairs mild steel peg stays 150 mm long for steel windows all as specified and as directed.

S&F in repairs Aluminium alloy tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc all as specified and as directed.

S&F in repairs Aluminium Brackets for 20mm dia curtain rods all as specified and as directed.

Resecuring, adjusting, cushioning minor repair of aluminum door, rubber beeding,lock etc without taking down, area exc 1.0 Sqm but not exc 2.0 Sqm all as specified and as directed.

All as per item No 60. above but area not exc 1.00 Sqm for windows

S&F in repairs 5mm thick plain glass fixed with rubber beading or oil putty etc all as specified and as directed.

S&F in repair aluminium anodised grills (pattern DG-104) weight of 2.00 to 3.20 Kg/Sqm for windows, ventilators, etc including jointing, cleats etc and fixed with medium screws into walls / frame work etc complete all as specified and as directed

S&F in repair aluminium anodized window sliding shutter shutters without sash bars, aluminium section 45.2 x 35 x 1.30mm (for frame Jindal Section No 20664) and 37.5 x 15 x 1.60mm (for shutter, Jindal Section No 20597) of make JINDAL or equivalent including rubber packing anodized aluminium snap beading etc with 4mm thick plain glass ncluding necessary locking arrangement and all fittings such as hinges, handles, stays etc all as specified and as directed. Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S&F 18/19mm thick plywood, grade, BWP, type BB fixed with screws to timber frame work including wooden beading/ fillets all-round etc., complete all as specified and as directed.

S&F in repairs 18/19 mm thick plywood, grade BWP, type BB fixed in cupboard shelves, partitions etc., including wooden beading/ fillets all-round etc., complete all as specified and as directed.

S&F in repair pre laminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in pelmet boxes all as specified and as directed

S&F ball catches with 8mm dia steel ball and brass body & striking plate including letting in and fixed all as specified and as directed

S & F in repairs double action floor spring hydrauically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with satainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F aluminum anodised Hasp & Staple of size 75mm safety type including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F in repairs 75mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F in repairs two lever lock (vertical type), 100 mm long, brass body suitable for aluminium doors all as specified and as directed.

S&F in repairs aluminium powder coated door seal fixed at bottom of the door all as specified and as directed.

S&F in repair 3 to 4mm plain mild steel wire galvanised class 3, fixing to wood, concrete, steel etc including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins etc all as specified and as directed.

Restraining and resecuring including making good staples etc of Plain mild steel wire in any dia and in any position as for mosquito nets, cloth drying net and the similar work and fixing to straining bolts,hooks,eyes etc all as specified and direted

Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.

S&F multi rib TMT profile high tensile, colour coated galvalume steel sheets 0.50 mm thick as in roof covering or vertical surface having maximum pitch of 250mm centre to centre and minimum 28mm crest depth in length, as per site requirement fixed with self drilling/self taping screws, EDPM seal end lap 100mm and side lap one corrugation complete all as per the manufactures instruction and all as specified and as directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-290 (Gde E-165) all as specified and as directed.

S&F in repairs Mild steel handles left or right for steel windows all as specified and as directed.

S&F in repairs Mild steel handles peg stay 200mm for steel windows all as specified and as directed.

S&F in repairs Steel ventilators with top hung shutters including peg stay , hinges etc all as specified and as directed.

S&F for Steel windows with side hung shutters including boxtype hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints and hacking for key scrubbing down with water etc all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash all as specified and as directed.

M/L for preparation of newly plastered wall surfaces and application of two coats of oil bound distemper over a coat of appropriate primer all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint all as specified and as directed.

S&F in repair aluminium anodized window sliding shutter shutters without sash bars, aluminium section 45.2 x 35 x 1.30mm (for frame Jindal Section No 20664) and 37.5 x 15 x 1.60mm (for shutter, Jindal Section No 20597) of make JINDAL or equivalent including rubber packing anodized aluminium snap beading etc with 4mm thick plain glass ncluding necessary locking arrangement and all fittings such as hinges, handles, stays etc all as specified and as directed. Note:- Aluminium section of size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

M&L for 6mm thick AC corrugated sheet on roof covering fixed with L or J type hook all as specified

Fixing only 6mm thick AC corrugated sheets with J or L hook all as specified. NOTE: Serviceable AC corrugated sheet in good condition obtained from item No 76 shall be fixed under this item.

S&F in repair 2mm thick fibre glass reinforced transulent correguted sheeting with two corrugate side lap fixed with 'L' or 'J' type hook fixed in roof ,wall etc

Dismantling wrought iron or mild steel work of any description not otherwise provided for and in any position

Taking down steel rolling shutters pull and push type not exceeding 14 Sqm of clear opening each including hood cover and cleaning the sides of shutters, suspension shaft and guide channels and greasing all the moving parts of rolling shutters and straining of rolling shaft, tightening and re-fixing the same in its original position including hood cover complete all as specified and directed by Engineer-in-Charge.

All as per item No. 94 above but gear operated rolling shutters exceeding 10 Sqm and not exceeding 24 Sqm area including adjustment of gear worms / assembling all as specified

Taking down steel rolling shutters/ collapsible gates of any description complete

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

S&F Steel rolling shutters (1.00mm laths thickness) without ball bearing as specified including top cover anchoring rod, hasp and staples, guide channels, complete and one shop coat of primer errected in position as per site requirement complete all as specified

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters

S&F in repairs ball bearing for rolling shutters

M&L for cleaning and greasing all moving parts of hanger door shutter of area exceeding 20 Sqm without taking down from its position straightening the member if any as required at site for smooth functioning of hanger door all as specified and directed by Engineer-in-Charge . Note : Quoted rate shall be inclusive of labour charges for replacing existing unserviceable cast iron wheel if required at site. Supply of new cast iron wheel shall be measured and paid separately under relevant item as supply only.

Supply only cast iron wheel of 300mm dia having groove for rolling over existing rail with 25mm dia bronze brush and axial weight of each wheel not less than 35Kg all as specified and directred

Supply only cast iron wheel of 80mm dia and 40mm thickness having groove at centre , suitable for rolling over the existing rail, finishing the external surfaces of wheel smoothly including grinding etc all as specified and directed by Engineer-in-Charge

S&F in repairs mild steel, plain black sheet 0.80 mm thick in wall cladding, steel gates and similar work cut to size, holes punched; including round headed screws, clout nails or rivets and fited to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required all as specified and as directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde E-165) all as specified and as directed.

S&F Mild steel framed work as in grills and grating, guard bars etc all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cills, copings, bed plates etc including necessary formwork all as specified and as directed.

S&F in repairs 0.60 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts all as specified and as directed.

All as per item No 108 above but bent to curve (of any radius)

S&F in repairs 0.60 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings with grade of zinc coating 275 all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store all as specified and as directed.

Excavation in post holes (or similar holes) in hard/dense soil each not exceeding 0.5 Cum getting out in hard/dense soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surface all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregates as in foundation all as specified and as directed.

S&F 600mm wide PlainTMT profile high tensile, colour coated galvalume steel sheets 0.50 mm thick as in roof covering in ridge or valley gutters, as per site requirement fixed with self drilling/self taping screws, EDPM seal end and side lap 100mm complete all as per the manufactures instruction and all as specified and as directed.

Taking down PVC chowkats/Frames of area not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frame) all as specified and as directed.

Taking down PVC chowkats/Frames of area exceeding 1.5 sqm but not exceeding 4.0 Sqm each with shutter (without taking off shutters from the frame) all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type, anodised of size 150mm all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm all as specified and as directed.

sri anjaneyaa construction

vrk constructions