Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹19.5 L+₹4,348 (0.22%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹20.9 L+₹1.5 L (7.67%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹22.0 L+₹2.6 L (13.4%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L4 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(East) Ferozepur cantt
GE(East) Ferozepur cantt
CERTAIN REPAIR TO OTM ACCN OF RAJPUT, MED REGT, SHO AND FD WKSHP UNDER GE (EAST) FEROZEPUR CANTT
2023_MES_593922_1
8113/GE/E/FZR/23-24
Open Tender
Civil Works
Item Rate
180 days
GE(East) Ferozepur cantt
please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE(East) Ferozepur cantt
₹50,000
Yes
19 Jun 2023
8 May 2023
6 Jun 2023
8 May 2023
3 Jun 2023
22 May 2023
Amount
Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and as directed.
Demolition mud in roofs, any thickness, including plastering and leaping etc complete all as specified and as directed.
M&L for Rendering 10 mm thick cement plaster on roof surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and as directed.
M&L for Polythene film 150 micron thick laid on roofs with 150 mm overlaps including a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and as directed.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.
M&L 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster etc complete all as specified and as directed.
M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.
All as per srl item No 7 here-in-before but using old brick tiles retrieved from dismantling (Item No 1 here-in-before) including cleaning and removal of mortar from tiles complete all as specified and as directed.
Racking out of cement joints/pointing of bricks work or brick tiles laid flat in floor surface,chanels,roofs etc complete all as specified and as directed.
M&L for Flush pointing to brick tiles / tarracing tiles laid flat on roofs in cement mortar 1:3 complete all as specified and as directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and as directed.
All as per srl item No 11 here-in-before but using old bricks retrieved from dismantling under ser item 10 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and as directed.
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for Rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.
M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over and including 2mm thick wall care putty complete all as specified and as directed.
M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over and including 2mm thick wall care putty complete all as directed of any shade on walls surfaces
M&L for Preparation of new plastered surfaces of ceiling & applying two coats of white washcomplete all as specified and as directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified.
All as per srl item No 23 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.
Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening complete all as specified and as directed.
Resecuring, or easing & adjusting without taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each complete all as specified and as directed.
Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and as directed.
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and as directed.
S&F for Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and as directed.
S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and as directed.
S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and as directed.
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/E8 & CEJZ/TD-1020/E8.
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/E8 & CEJZ/TD-1020/E8.
S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CEJZ/TD-1019/E8 & CEJZ/TD-1020/E8.
M&L for Mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and as directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and as directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.
Dismantling timber scantling unframed work as in fillets, rails, posts, rafters, purlins,etc under 40 Sq.cm in section complete all as specified and as directed.
M&L in repair for Plain fillets of 2nd class hard wood, square or rectangular or triangular in section, clean sawn, secured with nails and brads area n exc 3 Sq cm complete all as specified and as directed.
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.
M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparation of old painted surface of steel and iron of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F Mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified and as directed.
S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and as directed.
S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and as directed.
S&F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and as directed.
S&F alluminium anodised handles 150 mm long fixed to doors complete all as specified and as directed.
S&F alluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and as directed.
S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and as directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and as directed.
S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
All as per ser Item No59 above but fixed in repairs
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed.
S&F Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed.
Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.
M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified and as directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.
M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified and as directed.
M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed.
M&L 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and as directed.
Supply only 38mmx3mm glass dividing strips as in floors complete all as specified. (fixing included in item of floor topping).
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and as directed.
M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.
M & L sand filling under floors or in foundations including watering and consolidation complete all as directed by Engieer-in-charge .
Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cm(1:6), complete all as specified and as directed.
M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and as directed.
M/L Non skid ceramic coloured tiles 7-8 mm th (square or rectangular)area of eacch tile exc 0.06 SM but not exc 0.11 SM in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for Vitrified ceramic tile Light shade 10 mm thick (square or rectangular) polishedarea of each tile not exc 0.36 SM in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L Glazeded ceramic coloured (colour & shade as approved) tile 350x250x7 mm/450x350x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white/ coloured cement with pigment to match the colour of tiles over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm th set and jonnted in cement slurry and pointed in white or colour X 7 mm th set and jonnted in cement slurry and pointed in white or colour cement to match over and including 10mm thick back coat in CM 1:4 complete all as specified and directed.
S&F as in repair/replacemnt of lid of PVC water tank of capacity 500 ltrs including screwing with existing water tank with PVC nut a bots complete all as specified and directed
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
All as per item No 82 here-in-before but 20 mm bore tubing.
M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and directed.
All as per item No 84 here-in-before but 20 mm bore tubing.
Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified.(Note:- Serviceable pipes obtained from item 82 to be reused).
All as per item No 86 here-in-before but 20 mm bore ( Note: Serviceable pipes obtained from item 83 to be reused).
S&F in repair bib taps, cast copper alloy with crutch or butterfly handle fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.
S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.
S&F in repair Gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
S&F in repair 15mm bore bib tap standard of PTMT any colour screwed, for iron pipe (minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe (minimum weight 15mm-90gms) complete all as specified and as directed.
S&F in repair 20mm bore stop valve of PTMT any colour high pressure screwed, for iron pipe (minimum weight 20mm-92gms) complete all as specified and as directed.
S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed, for iron pipe (minimum weight 15mm-90gms) complete all as specified and as directed.
M&L for taking down existing Bib tap and pillar taps/sink mixture/wash hand basin mixture of any type for replacing washer/ brass spindle etc. and refixing the same complete all as specified and directed.
M&L for taking down existing stop valve/angle cock 15 mm bore by replacing washer/spindle etc.And refixing the same complete all as specified and directed.
S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.
S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.
S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.
S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.
S&F Vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.
S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and directed..
S&F 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP cuppling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.
S&F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed.
S&F PTMT grating doom 100mm dia with or without waste hole (minimum weight 25gms) fixed in repairs complete all as specified and as directed.
S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.
S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.
S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed.
Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches including clamps complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches including clamps complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and directed.
M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-CHarge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as directed by Engineer-in-Charge
Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blanckets, any thickness,including cover fillets complete all as specified and directed.
Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.
Material and labour fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.
S&F in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification & drawing complete all as specified and directed.
M&L for 15 mm thick rendering over concrete surface of sunken floor in CM 1:3 on wall as well as sunken floor using water proofing compound as per manufacturer's instruction or 3% by weight of cement whichever is more and finished even and smooth without using extra cement complete all as specified and directed.( Note: -WPC measured and paid separetely)
M&L for water proofing treatment to RCC sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturer's instructions.(iii) All CI/PVC traps in sunken slabs to be enclosed with PCC 1:1.5:3(min 15 cm) all round complete all as specified and directed.
M&L for Cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete complete all as specified and directed.
Taking down aluminium door/windows shutters only (area exc 0.5 sqm but not exc 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified & directed.
Hacking out old broken glass (any thickness,size quality or description ) fromfrom metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
All as per Ser item No 132 herein above but exc 0.5 Sqm in each pane
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
Supply and fixed in repair hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg, etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixed in repair Brass mortice lock 75 mm, 2 levers, vertical type complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semi corrugated, etc) ) sheets in on roof coverings complete all as specified and directed.
Dismantling framed work timber scantling of any size/ section, in any position complete all as specified
S&F 6 mm thick Asbestos cement corrugated or semi corrugated sheet in roofs walls etc, fixed with L or J type or cranked hook bolts complete all as specified and directed.
S&F 6mm thick Asbestos cement two piece adjustable serrated ridge, for corrugated or semi corrugated sheets fixed with L or J type or cranked hook bolts complete all as specified and directed.
Supply only integral water proofing compound complete all as specified.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) complete all as specified and directed.
B.L. Chaudhri and Co.
M/S Sandhu Const.Co.
M/s Sarup Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .