Construction of C.C Road and Drain on Nayakas and Kumbaras Street (next to the SIPM factory compound) in Chikkayanachatra village, Nanjanagudu taluk.

Construction of C.C Road and Drain on Nayakas and Kumbaras Street (next to the SIPM factory compound) in Chikkayanachatra village, Nanjanagudu taluk.

Code 1 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte... 34.31 Cum

Code 2 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,... 34.31 Cum

Code 3 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia... 22.88 Cum

Code 4 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c... 34.31 Cum

Code 5 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati... 326.01 Cum

Code 6 Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, including setting... 217.34 Cum

Code 7 Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, including settin... 141.05 Cum

Code 8 Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width) trench width as per drawing and technical specification, including setting o... 141.05 Cum

Code 9 Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width) trench width as per drawing and technical specification, including setting o... 129.18 Cum

Code 10 Earth work excavation for pipeline trenches by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width) trench width as per drawing and technical specification, including setting o... 11.32 Cum

Code 11 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit... 300.00 Mtr

Code 12 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/ Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q... 1.00 Nos

Code 13 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/ Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q... 1.00 Nos

Code 14 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/ Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q... 2.00 Nos

Code 15 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/ Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q... 1.00 Nos

Code 16 Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch... 1.00 Nos

Code 17 Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch... 2.00 Nos

Code 18 of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting... 1.00 Nos

Code 19 of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting... 1.00 Nos

Code 20 of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting... 1.00 Nos

Code 21 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ... 747.55 Cum

Code 22 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work 207.08 Cum

Code 23 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin... 61.83 Cum

Code 24 Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit... 90.00 Mtr

Code 25 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/ Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q... 3.00 Nos

Code 26 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ... 57.68 Cum