CONSTRUCTION OF ADMINISTRATIVE OFFICE BUILDING AT THIRUVANNAMALAI DCMPU LTD

Amount

Earth work narrow excavation for foundation in all soils and sub-soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water wherever necessary, refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick, watered, well rammed, consolidated and depositing the surplus earth on bank with initial lead of 10 m & initial lift of 2 m, clearing and leveling the site etc., complete as directed by the Federation officers and as per standard specification.

Supply and filling with M sand for foundation and basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.

Supply and filling with gravel for basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.

Plain Cement Concrete 1:5:10 [one part cement, five parts sand and ten parts aggregate]using 40 mm size hard granite broken stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish etc., and including side shuttering if required and compaction, curing etc., complete as directed by the Federation officers and as per standard specification.

Supply, erecting steel centering using M.S. sheet of size 90 x 60 cm and BG 10 gauge stiffened welded with M.S. angle of size 25 x 25 x 3 mm laid over silver oak / country wood joist of size 10 x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 to 13 cm dia spaced at 75 cm centre to centre for all type of RCC roof slab, lintel beam, "T", "L" beam, landing slab, plinth beam, grade beam, column footing, column, sunshade, facia, sloped roof, waist slab etc., including necessary supports with all cross bracings, filling slits and holes in the surfaces [The retrieved materials should be taken back by the contractor] and side shuttering etc., complete as directed by the Federation officers and as per standard specification. Up to Basement level Plain surface.

Up to Basement level -Column

Basement up to 3.30m level - Plain surface.

Basement up to 3.30m level -Columns

3.30m - 4.30m level - Plain surface.

3.30m to 4.30m level-Column

4.30 - 5.30m level -Columns

5.30 - 6.30m level-Columns

5.30 - 6.30m level-Plain

6.30 - 7.30m level -Columns

Reinforced cement concrete machine mixed 1:2:4 using 20 mm machine crushed hard granite broken stones for all RCC works cost excluding centering and reinforcement but including compaction with mechanical vibrators and curing etc., complete as directed by the Federation officers and as per standard specification. Up to Basement level

Basement to 4.50m level

4.50m level.- 9.0m level

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Brick work in cm 1:3- 115mm tk using stock brick of size9"x4.5"x3"including curing etc complete with standard specifications. 0.00-4.50m level

Brick work in cm 1:5 using ground moulded chamber burnt brick of size9"x4.5"x3"including curing, racking and cost and conveyance of all material and labour charges etc complete with standard specifications. Upto Basement level

Basement to 4.50m level.

4.50m level.- 9.0m level

Plastering in C.M 1:3 - 10 mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Plastering in C.M 1:5 - 12 mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Supplying and laying Vitrified tiles (Nano polish) for floor (Somany/Kajaria or equivalent) for a size of 0.60*0.60m of approved quality and color set in C.M 1:3 20mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Daddoing with Ceramic tiles 200*300*6mm size of colored designed of approved quality set in CM 1:2, 10 mm thick and pointing with white cement etc.

Supply and paving the floor with ceramic tiles of 305*305*6mm size color and design tiles (Acid/Alkali proof vitreous) laid in cement mortar 1:3, 10 mm thick and applying cement slurry etc., complete

Supply and paving the floor with Pre-polished Concrete Anti-Skid Step Tiles of 20mm thick laid in cement mortar 1:3, 10 mm thick and applying cement slurry etc., complete

Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. Plain Pre-laminated Door

Supply and fixing of PVC door of specified size with necessary hardware fittings like handle hinges etc., complete as directed by the Federation officers and as per standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. 0.75 X 2.10 M

Supplying, fabricating and fixing in position of Alumi. Anod. natural colour matt finish Window half glazed and half PLB glazed door using rectangular Alu. Box section of follow board / fully 12 mm thick PLB board / fully 5.5 mm thick glazed door using rectangular Alu. Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Handles, Locks and glass including all materials, Labour, power consumption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic fill thickness of not less than 15 Microns (Fifteen) for all sections. All the materials should be got approved by the Engineer - In charge before fixing as directed.

Supplying and fixing in position of alulminiudition in accordance with ISI specification anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns, beams or masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification -1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections. All the materials should be got approved by the Engineer-in-charge before fixing in position as directed.

Painting new iron work for window shutters, ventilators, iron grills, weld mesh screen with two coats of approved quality and colour of ready mixed synthetic enamel paint and scraping the surface with emery paper, in all floors etc., complete as directed by the Federation officers and as per standard specification.

Painting two coats with Plastic Emulsion paint of approved quality and colour over white cement priming coat for new plastered wall surfaces, cost including curing and also make good of the surfaces with sand paper, putty, scaffolding etc., complete as directed by the Federation officers and as per standard specification.

Supply & fixing in position of powder coated MS roofing sheets of 0.47 mm for roofing including bolts, nuts and washers etc., complete as directed by the Federation officers and as per standard specification.

Supplying, fabricating and placing in position MS Truss for Roofing as per design given including cost of steel, bolt nut in all floors etc. complete complying with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. Complete.

Construction of manhole chamber of size of inner dimension 0.60x0.60 and 0.45m to 1.00m depth over a bed of PCC 1:5:10 , 100mm tk using 40mm metal and side wall with brickwork etc and covered with heavy duty chamber cover to a required size etc complete as per standards.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply of IWC of ISI approved make and colour with double flapped cover with necessary P or S traps with all necessary internal fittings etc and fixing in position etc complete as directed by the Federation Officers.(580 x 440 mm)

Supply and fixing of Lipped Mouth Porcelin Flat Back Urinal with all accessories such as 32mm dia Bell mouth PVC connection, 15mm dia G.M. wheel value, 15mm dia 'B' Class G.I. waste water pipe, 15mm dia nylon connection, 15 mm dia brass nipple etc., (White colour)

Supply & fixing in position Indian make white glazed earthen ware wash hand basin of approved make with a pair of CI brackets, 12 mm CP Pillar tap, 40 mm PVC waste pipe and couplings, 10 mm CP connection and with 1 No. 12 mm CP concealed stop cock and giving necessary connection including cost of white lead, TW plugs, clamps, screws, washers etc., complete as directed by the Federation officers and as per standard specifications. (550 x 400 mm - White without Pedestal)

Supply & fixing in position of special type mirror of size 1000 x 780 mm with necessary fittings, screws etc., complete as directed by the Federation Engineers and as per standard specifications.

Supply & fixing CP Towel Rail of 60 cm long and 20 mm dia with brackets including TW plugs, screws etc., complete as directed by the Federation Engineers and as per standard specifications

Supply & laying / fixing of UPVC pipe of approved quality along the wall surface / trenches including cost of pipe including all specials, solution, clamps, scaffolding charges, necessary earth work excavation & refilling the same etc., complete as directed by the Federation officers and as per standard specifications. 32 mm dia UPVC pipe

20 mm dia UPVC pipe

Supply & fixing of PVC pipe of ISI make including all special, cutting, threading, glues for sanitary water connecting line etc., complete as directed by the Federation officers and as per standard specifications. 110 mm dia PVC pipe of 6 kgf/cm²

75 mm dia PVC pipe of 6 kgf/cm²

Supply & fixing of STOP COCK CP 15 mm dia with necessary fittings. complete as directed by the Federation officers and as per standard specifications.

Supply & fixing of CP ANGLE COCK tap with necessary fittings. complete as directed by the Federation officers and as per standard specifications.

Supply & fixing of GATE VALVE/Wheel Valve 32mm with necessary fittings. complete as directed by the Federation officers and as per standard specifications.

Supply & fixing of FLOOR TRAP 100x75mm with necessary fittings. complete as directed by the Federation officers and as per standard specifications.

Supply and fixing of heavy duty CI chamber cover with frames of size 60 x60 cm for septic tank etc complete as directed by the Federation officers and as per standard specifications.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling up to a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick) etc complete as directed by the Federation officers and as per standard specifications.

Electrical -Wiring with 2x1.5Sqmm. (22/0.3) PVC insulated unsheathed SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall & ceiling with PVC accessories with TW switch Box and 1 No. 5A one way SP 1 Module switch in flush with wall for making good of the concealed portion with suitable colour for PVC concealed light point/Fan (For Electronic Regulator.)

Wiring with of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed cu. conductor of 1100V grade in suitable PVC rigid pipe on canceled & ceiling with continuous earth wire connection of 14 SWG TC wire with paiting suitable.

Supplying and Fixing of 20A /3 pin Mc plug with 3 pin Top connection.

Supplying and fixing of 5A 3pin connection

Supplying and fixing of AC Ceiling fan complete 1400mm (56") Sweep with 300mm Down Rod without Regulator (Crompton/Equivalent)

Supplying and fixing of AC Ceiling Fan Step Regulator 100W - 1 Module

Supplying and fixing of AC Exhaust Fan 375mm (15") Sweep (Heavy Duty).

Supplying and fixing of 32A DP MCB and AC plug.

Supplying and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 215 kgs of carbon based environment friendly backfill compound and suitable clamp. (Earth Electrode).

Supplying and fixing of 4 18 watts crystal glass tube light etc complete .,

Vertical Three Phase Distribution Board with MCBS 8 way vertical TPMCB Sheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single /three phase MCB outgoings and separate 4 way provision for accommodating One No.4 pole ELCB/RCD with label holder and provisions for taking up cable for size not less than 35.

Dismantling of natural rock using deploying machineries the cost including conveyance and removal of debris away from site etc.,Complete as directed by the Federation officers and as per standard specifications.

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60W bulb

Supply and fixing of RCC Rings 300 x 150 mm and 0.6 m height etc complete as directed by the Federation officers and as per standard specifications.

Supply and fixing of 40mm Brick jelly etc complete as directed by the Federation officers and as per standard specifications.

Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.

CONTINENTAL CONSTRUCTION COMPANY