Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.4 L+₹1.6 L (5.61%)Rejected-Finance | L2 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹56,300
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
PROVN OF CERTAIN MINOR WORKS AND REVENUE WORKS AT MIL STN SRI GANGANAGAR
2023_MES_617695_1
GE SGNR/TOK-48 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and b(i) and for un-enlisted, refer NIT para 8.
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹56,300
Yes
17 Nov 2023
13 Sept 2023
13 Oct 2023
13 Sept 2023
11 Oct 2023
27 Sept 2023
Amount
S&F Stainless steel kitchen plate rack of overall minimum size 900 mm x 750 mm and 300 mm deep, with partations for small/large plates etc made out of stainless steel 1.00 mm sheet thick 1st quality fixed with rawl plug and CP Steel screws complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation etc for shaft, wells, manholes & for laying of cable including taking up or down the LT Cable, not exceeding 10 Sqm on plan in soft /loose soil; & getting out complete all as specified and directed by Engineer - in - Charge.
M&L for PCC as in foundation type D-2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.
M&L for Reinforced Cement concrete (design mix) M-25 using 20mm graded aggregate in foundations, footings, plinth beams etc. complete all as specified and directed by Engr-in-Charge.
M&L for Reinforced Cement concrete (design mix) M-25 in columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.
M&L Reinforced Cement concrete (design mix) M-25 20mm graded stone aggregate in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.
M&L TMT bars as in reinforcement 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia using TMT bars complete all as specified and directed by Engr-in-Charge.
M/L for TMT bar 8 mm dia cut in shape length incl cranking bending etc and binding with and incl MS wire not less than 0.9 mm complete all as specified and directed by Engr-in-Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to better for flat rough finished surface of concrete etc complete all as specified and directed by Engr-in-Charge.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal rough finished surface complete all as specified and directed by Engr-in-Charge.
M&L Damp Proof course, 40mm thick in PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate to horizontal or vertical surfaces including mixed with water proofing compound as per manufacture instructions including necessary form work complete all as specified and directed by Engr-in-Charge. NOTE : Supply only WPC to be measured and paid separately.
Supply only integral water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.
M&L brick work with Fly Ash old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L brick work with Fly Ash old size bricks straight or curved on plan exceeding 6.0m mean radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick rendering in CM 1:4 to brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L rendering 15mm thick in CM 1:6 on faces of brick work or conc work finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 5mm thick rendering in CM 1:3 to brick / concrete surface of ceilling surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over & including upto 2-3 mm thick wall putty over one coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surface of wall any description and applying two coats of acrylic emulsion distemper over & including upto 2-3 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering complete all as specified and directed by Engr-in-Charge.
M&L for three coat of white wash on ceiling on new plastered surface including prepration complete all as specified and directed by Engr-in-Charge.
M&L Broken brick of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.(Broken bricks)
M&L 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base as in floors, paving, subfloor etc fineshed even and smooth flooring complete all as specified and directed by Engr-in-Charge.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L 450x300 x7/600x300x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4. complete all as specified and directed by Engr-in-Charge.
M&L providing 75 mm thick cement concrete type 1:3:6 (40 mm graded) C-2 as in Plinth protection complete all as specified and directed by Engr-in-Charge.
S&F fiber glass reinforced plastic (FRP) Door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fire retardant grade unsaturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engr-in-Charge.
S&F 30mm thick fiber glass reinforced plastic (FRP paneled Door Shitter of required colour and approved brand and manufacture made with fire-retardant grade unsaturated polyster resin. Moulded to 3mm thick FRP laminate for forming places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 including 03 x 100mm long butt hinges, heavy weight, cold rolled mild steel, 150 mm long aluminium handle cast type anodised, 01 x aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engr-in-Charge.
M&L anodised aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) including aluminium grill and wire mesh complete all as specified and directed by Engr-in-Charge.
S&F Aluminum alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture and fixed with aluminium wire staples complete all as specified and directed by Engr-in-Charge.
S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge. Note : PVC tank shall be ISI marked.
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed by Engr-in-Charge.
S&F steel water tubing galvanised 15mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engr-in-Charge.
S&F, CP 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge
Supply and fix CP stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm,complete all as specified and directed by Engr-in-Charge.
Supply and fix, CP stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engr-in-Charge.
Supply and fix CP Angle stop valves of any type concealed/exposed, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engr-in-Charge.
Supply and fix Counter top/counter sunk vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed on coloured granite and fixed to wall, including chromium plated 01 x 15 mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC Connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover & jet with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackts all as specified and directed (10 ltr capacity) complete all as specified and directed by Engr-in-Charge.
M & L granite (of any type) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6. complete all as specified and directed by Engr-in-Charge.
S&F Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges Brass Chromium plated complete all as specified and directed by Engr-in-Charge.
S&F Towel Ring of aluminium fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engr-in-Charge.
S&F CP Health faucet fixing in pipe etc. complete all as specified and directed by Engr-in-Charge.
S&F Urinal partitions slabs of 15 mm thick toughned glass terminating about 40cm above floor line, fixed in repairs complete all as specified and directed by Engr-in-Charge.
S&F Glass shelf assembly fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F, 100 mm dia cast iron soil waste pipe and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed by Engr-in-Charge.
. M&L for 100mm dia cast iron Bends complete all as specified and directed by Engr-in-Charge.
. M&L for 75mm dia cast iron Bends complete all as specified and directed by Engr-in-Charge.
S&F Vitreous China Urinals, bowl type ( back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. ( Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe) including CP Urinal spreader for fixing with 15mm dia pipe.(Minimum weight 60gms) complete all as specified and directed by Engr-in-Charge.
M&L for concrete bed to drain pipes for 100mm boreincluding packing under, and haunching against the sides of pipes after they are laid and acomplete all as specified and directed by Engr-in-Charge.
M&L for concrete bed to drain pipes for 150mm boreincluding packing under, and haunching against the sides of pipes after they are laid and complete all as specified and directed by Engr-in-Charge.
M&L 100mm bore (internal dia) salt glazed stone ware drain pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all as specified and directed by Engr-in-Charge.(concrete bed shall be measured and paid for separately).
M&L 150mm bore (internal dia) salt glazed stone ware drain pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all as specified and directed by Engr-in-Charge. (concrete bed shall be measured and paid for separately).
M&L pre-cast cover slab for 65mm thickness type B1 (1:2:4) using 20mm graded aggregate complete all as specified and directed by Engr-in-Charge.
M&L Cutting for 150 mm pipe into existing manhole for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engr-in-Charge.
S & F PVC (SWR) floor trap 75mm size, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S&F 100 mm cast iron Traps ‘P’ or ‘S’ complete all as specified and directed by Engr-in-Charge.
Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. or in similar work etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-charge
M&L for reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) as in slab supported on walls, beam and column in floors, roofs ,landings, balconies, deck slab, parapet walls and in shelves and etc and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge (Note : (i) The rate quoted shall be deemed to include use and waster of necessary form work. (ii) work to be executed upto the height of 10 mtr)
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-charge
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc complete all as specified and directed by Engineer - in - Charge.
M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed by Engineer-in-charge
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-charge
M&L, 15mm thick rendering/plastering on any face of brick wall or concrete surface consisting in two layers i.e. First laye 10 mm thick in cement mortar (1:4) and second (top layer) layer 5 mm thick in cment mortar (1:4) including mixing of liquid WPC in mortar @ as per manufacturer instruciton per bag of cment of 50 Kg, finisied even and smooth without using extra cement complet all as specified and as directed by the Engineer in charge (Note WPC shall be measured & paid separately as supply only) in CM 1:4 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete.
M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying two coats of cement base paint over over & including 3 mm thick wall putty well prepared old decorated plastered surface etc complete all as specified and directed by Engineer-in-charge
M & L for preparation of old decorated wall surfaces by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying two coat of acrylic emulsion distemper over & including 3 mm thick wall putty complete all as specified and directed by Engineer-in-charge
M & L for old decorated ceiling surfaces by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying two coats of white wash complete all as specified and directed by Engineer - in - Charge.
Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-charge
S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer-in-charge
M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed by Engineer - in - Charge.
S&F 0.56 mm thick, plain, Aluminium sheeting, Alloy 31000 H4 for crumple/expansion joints, ridges, hips, valley gutter, drip and strainght flashing (length and girth as fixed) fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. Note : Including dismantling of old plain or corrugated steel sheeting, any gauge and thickness, including asbestos / Nainital or similar pattern roof coverings/wall cladding/crumple joint sheet.
Taking down steel window/ventilators chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer - in - Charge.
S& F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge
S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles including flyproof wire mesh. complete all as specified and directed by Engineer-in-charge Note:- Design shall be approved by Engineer - in - Charge. Note :- Minimum thickness of powder coating shall not be less than 50 micron.
Supply and fixing hard drawn steel wire fabric not exc 4 Kg/Sq, cut to length, wire mesh to be fixed and firmly anchored to the concrete surfaces by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-charge
Surface Excavation n.exc 30 cm deep and avg 15 cm deep and setting out in soft/loose soil complete all as specified and directed by Engineer-in-charge
M&L Hardcore borken to gauge n exc 63 mm of broken bricks in subbases complete all as specified and directed by Engineer-in-charge
M/L 100mm thick cement concrete (1:4:8) type D-2 usig 40mm graded stone aggregate as in sub base complete all as specified and directed by Engineer-in-charge
M/L 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring incl finishing the concrete surface smooth & even without using extra cement complete all as specified and directed by Engineer-in-charge
S& glass dividing strip 3mm thick and width of strip 38mm inserting in position complete all as specified and directed by Engineer-in-charge
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm FRLSH copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-charge
All as per Srl item No 89 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No 89 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No 89 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S & F of T/L Fitting LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
S&F security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge .
S & F Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,with LED driver and LED strip light 10 W all as specified and directed by Engineer - in - Charge .
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified.
S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point all as specified and directed by Engr -In - Charge
Supply and fix PVC body Exhaust fan 300mm sweep, 240 volt, 50 Hz, 1400 RPMcomplete with frame , louvers, nuts bolts etc all as specified and directed by Engr -In - Charge. Note : Exhaust fan shall be ISI markded.
Supply and lay jointing and testing and commissioning in replacement of 10 Sqmmx2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
Returning filling in & including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by engineer in charge.
Removal of Excavated material n exceeding 50 mtr and depositing where complete all as specified and directed by engineer in charge.
M & L for sand cushioning with dry coarse canal sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.
Supply and lay standard size bricks subclass B type complete all as specified and directed by engineer in charge.
M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete, laid in trenches/wall or floor , and connections of 25 mm bore, completed all as specified and directed by Engineer-in-Charge
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches/wall or floor ,and connections of 20mm bore, completed all as specified and directed by Engineer-in-Charge
Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 100mm bore GI/DI water pipe line including drilling and welding of 15-25mm GI socket and necessary rubber insertion, nut, bolts & washers completed all as specified and directed by Engineer-in-Charge
S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, completed all as specified and directed by Engineer-in-Charge
M&L for Cutting existing steel tubing for alterations or additions for 40mm to 50 mm size Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) completed all as specified and directed by Engineer-in-Charge
S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, completed all as specified and directed by Engineer-in-Charge
S&F exhaust fan made of sturdy engineering plastic of 250mm sweep 240 volt, 50 Hz, 1400 RPM complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1:4) white washing matching with existing colour completed all as specified and directed by Engineer-in-Charge. Note : Exhaust fans shall be ISI marked.
S&F Heavy duty steel body exahust fan of 300mm sweep 240 volt complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fane complete including braking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1:4) white washing matching with existing colour etc. completed all as specified and directed by Engineer-in-Charge. Note : Exhaust fans shall be ISI marked.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engineer-in-Charge. Note : Electric water heater shall be ISI markded.
S&F gun metal globe or gate valve with iron wheel head screwed down, screwed for iron pipe and fixed for GI pipes of size 15mm bore completed all as specified and directed by Engineer-in-Charge
S&F steel water tubing medium grade galvanised 15mm bore with all fittings and fixed recess in walls and ceiling or laid in floors including making good to disturbed surfaces completed all as specified and directed by Engineer-in-Charge Note : All tubing should be concealed in wall by chasing and connection to be made independently from water tank to geyser
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 2.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-charge
S&F RCCB cap 25 Amps with sensivity 30mA, double pole in accordance with IS 12640-1 & IEC 61008-1) 240/415, 50 Hz with 10kA short circuit AC type withstand capacity including enclosure and other accessories complete all as specified and directed by Engineer-in-Charge. Note : RCCB should be fixed in DB with connection of geyser circuit
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
Engineers CXonstruction Company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .