JOB ORDER

Supply,installation,testing and commissioning Centrifugal pumpset 3 phase 415 volts,50 Hz of capacity 3.72 KW/5.0 Hp including necessary, CPVC fittings of 50mm x 40mm for suction and delivary line complete all as specified and directed. Make: Kirloskar or equivalent

Supply,installation,testing and commissioning of starter panel with DOL Starter suitable for 5.0 Hp Centrifugal pump set with single phase preventor, Dry run protection and digital type volts meter, ammeter etc. complete all as specified and as directed. Make : Havells or Equivalent

Supply and laying of LT UG cable four core XLPE insulated armoured heavy duty electric cable with Alluminium conductor ,1100 volts grade,cross sectional area 4 core 16 Sqmm complete laying through DWC/GI pipe/trenches/ walls all as specified.

Supply and laying of three core PVC insulated and PVC sheated copper cable for pump motors of 1100 volts confirming to IS 694 of nominal areas of copper conductor 10 Sqmm complete laying through DWC/GI pipe/trenches/walls all as specified.

M&L for cutting existing steel tubing altrerations or additions of GI pipe for inertions of 50mm dia Tee, in and including fittings such as unions, nipples and sockets etc. complete all as specified and directed.

Supply and Laying of GI tubing medium grade of size 50mm dia with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in trenches/ floors or fixed to walls all as specified. [Make: Jindal/ Prakash/ Tata/ Zenith]

All as per item 6 here in and above but 40mm bore

Supply and fixing MCCB 3 pole 415 volts,32 Amps 16 KA complete all as specified.

Supply and fixing Sheet metal enclosure triple pole and earth suitable for fixing of MCCB 3 pole 415 volts,32 Amps 16 KA complete all as specified.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.

M & L for Brass Non-Returning valves 50mm bore both end flanged with gasket washer, nuts, bolts etc complete all as specified. ( Make : HAZRA/VENUS/UPADHAYA )

S & F brass foot valve brass screwed and threaded , with strainer of 50 mm bore and jointing with the existing suction pipe line complete all as specipied and directed. (make : HAZRA / VENUS / UPADHAYA )

Taking out unserviceable ball valve from existing inlet pipe line and S & F new ball valve 20mm dia bore complete with polythene float, fly nut for GI Pipe connection including necessary GI fittings such as elbow, nipple etc in and including modification of existing PVC Sintex tank for inserting new CPVC pipe line including necessary fitting complete all as specified. (Make : PRAYAG)

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25 x 4mm as earth strip by means of bolts, nuts, check nuts and washer of galvanised iron or steel all as shown in Electrical plate No. 3, SSR Part I- 2009 with 400 mm dia medium grade GI pipe as a protection to earth strip and 15 mm dia medium grade GI pipe for watering purpose including excavation and earth work in any type of soil, funnel, wire mesh, PCC pit, RCC cover, CI frame etc complete and connected to earthing test point all as specified or indicated including testing on completion.

Kakolil Trade Agencies