PROVIDING AND FIXING OF NEW MS REVOLVING GATE IN ENTRIES OF VARIOUS PARKS OF SECTOR 41 A, B AND C, CHANDIGARH, UNDER WDF

Dismantlling of existing M.S. flat railig on brick masonary toe wall or on ground and removing of CC 1:2;4 block of size 1'-0"x0'-9"x1'-0" complete in all respect to the entire satisfaction of Engineer-in-Charge.

Refixing and repair(no new member) of old MS flat railing on brick masonary toe wall or on ground by providing CC 1:2:4 block of size 1'-0"x0-9"x1'-0" including cost of applying 2coats of synthetic enamel paint of approved brand complete in all respect to the entire satisfaction of Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7.4)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR : 6.1.1)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2)

Providing and fixing Turn style revolving gate made of 3 pieces 1'-6" wide, 2'-9" high consisting of opening to be paneled with 16 gauge M.S perforated sheet with the help of back to back MS flat of 25x10mm to fixed sheet in between with welding, jointing complete. The turn style will revolve around 2" (50mm) & 2 ½" (65mm) nominal bore (heavy quality) MS pipe 2'-9" high above ground level and 2'-0" below ground level embedded with cement concrete 1:2:4 blocks of size 1'-0' x 1'-0" x 1'-6". It further include two coat of paint over one coat of primer complete in all respect to the entire satisfaction of the Engineer In Charge.

15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1)

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) Flush/ Ruled/ Struck or weathered pointing to the entire satisfaction of Engineer-in-Charge. (DSR 13.31.1)

Finishing walls with acrylic Smooth exterior paint of required shade:- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm. (DSR 13.46.1)