Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹28.4 L+₹2.3 L (8.89%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹28.8 L+₹2.7 L (10.4%)Rejected-Finance NO 306 SCION AVENUE 4TH A CROSS KAGGADASPURA NEAR GANAPATHI TEMPLE BANGALORE 560093 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560093 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹28.9 L+₹2.9 L (11.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹29.3 L+₹3.2 L (12.4%)Rejected-Finance 8 6TH CROSS MATHRU SHREE NILAYA OPP MAHARISHI RESIDENCE KAGGADASAPURA CV RAMAN NAGAR BANGALORE 560 093 | BENGALURU URBAN | KARNATAKA | 560093 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
6 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE
PERIODICAL SERVICES AND BR WORKS FOR TYPE C N AND J MARRIED ACCN OF DRDO COMPLEX PHASE I C V RAMAN NAGAR BENGALURU
2024_MES_650734_1
GE(I)/R ND D/BAN/TOKEN/31 OF 2024-25 8286/E8
Open Tender
Civil Works
Item Rate
270 days
Work
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹70,000
27 Oct 2024
8 May 2024
12 Jun 2024
9 May 2024
6 Jun 2024
24 May 2024
9 May 2024 - 23 May 2024
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Removing demolished concrete materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and tacking at the destination exc 5.0 km total distance up to 10 KM complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, separating and stacking the serviceable material and disposing the unserviceable material outside MD land complete all as specified and directed.
Demolition of floor, hearth or wall tiling including cement mortar bedding (including bedding / backing coat), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.
Uprooting, scrubbing out shrubs / plant / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying (No Suggestions) acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. (Note : The works to be carried out in Bldgs are of G+4, necessary cost of scaffolding shall deemed to be included in quoted rate.)
Supply only liquid water proofing compound all as specified and as directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, all as specified and as directed.
Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.
Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:4 complete all as specified and as directed.
Material and labour for Plain Cement Concrete (1:5:10) type E2, using 40 mm graded stone aggregate as in sunken slab filling, mass concrete etc., complete all as specified and as directed.
Supply and fix Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC Sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings
Supply and fix, 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.
Re-securing or easing or adjusting wooden door shutters of any description (without taking off shutter from frame), of area exceeding 1 sq m but not exceeding 2 sq m each, including making good the disturbed surfaces to match the existing, complete all as specified and as directed.
Repairs to steel window / ventilator shutters of (area not exceeding 0.60 Sq m) any description, including replacing handles, steel hinges of any pattern, peg stay etc., and making window / ventilator absolutely working condition, welding (if required), complete all as specified and as directed.
Dismantling of composite steel windows / ventilators, not exceeding 0.60 sq.m, single leaf double shutter with fixed portion, including taking down glass panes and mosquito proof mesh, but except grill / guard bars, in any position, complete all as specified and directed.
Dismantling of composite steel windows / ventilators, exceeding 0.60 sq.m but not exceeding 4 sq.m, Single / double / triple leaf with fixed portion, including taking down glass panes and mosquito proof mesh, but except grill / guard bars, in any position, complete all as specified and directed.
Supply and fix, Stainless steel, butt hinges, of size 100 mm complete all as specified and as directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.
Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.
Taking down tubular curtain rod, supply and fixing drapery rod, decorative type, made of 25 mm dia mild steel pipe powder coated (wall thickness not less than 0.63 mm), bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Note : Price shall not be less than 100/- per RM, Make : Aerolux / Vista / MEC)
Taking down brackets for curtain rod, supply and fixing brackets suitable for drapery rod of 25 mm dia, with wall thickness of 0.63 mm thick, bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Make : Aerolux / Vista / MEC)
Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Material and labour, 25 mm thick, Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in flooring, complete all as specified and as directed.
Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in sub base / flooring / paving / hard standing, etc., finishing the surfaces even and rough complete all as specified and as directed.
Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-II a), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour, for Glazed ceramic coloured tiles, of size 300 x 450 x 7-8 mm thick (Grade B-II a) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick in CM 1:3, complete all as specified and as directed.
Demolition of stone slabs of any thickness and in any position, providing material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.
Material and labour, for rendering 10 mm thick in Cement mortar 1:6, on brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Rendering 15 mm thick on brick work or concrete surfaces in CM (1:3) mixed with integral water proofing compound as per manufacturers instructions complete all as directed. NOTE :- Water proofing compound will be measured and paid separately under relevant items of this schedule.
Rendering 15 mm thick on brick work or concrete surfaces in CM (1:4) mixed with integral water proofing compound as per manufacturers instructions complete all as directed. NOTE :- i) Water proofing compound will be measured and paid separately under relevant items of this schedule. ii) Bldgs where repairs are to be carried out are G+4, necessary formwork / scaffolding charges shall deemed to be included in quoted rates.
Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of water based wall primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Preparation of new or previously untreated plastered ceiling surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of water based wall primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV Resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed
Material and labour for, Preparing of old plastered surfaces on Walls and applying one coat of weather proof anti fungal exterior emulsion paint, complete all as specified and as directed. (Note : The Bldgs in which repairs are to be carried out are of G+4, necessary cost of scaffolding shall deemed to be included in quoted rate.)
Material and labour for, Preparation of old plastered surface, rid of fungus and mould for affected area, filling for holes and dents & filling for cracks and and applying one coat of oil bound distemper on wall surfaces complete all as specified and as directed.
Material and labour for, Preparation of old plastered surface, rid of fungus and mould for affected area, filling for holes and dents & filling for cracks and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed.
Complete removal of existing treatment and preparing the surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Complete removal of existing treatment and preparing the surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
Supply and fix Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.
.Supply and fix Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq m in each pane all as specified and as directed.
Preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Taking up or down 20 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Disconnecting existing PVC water tank of capacity exceeding 250 litres and not exceeding 500 litres fixed on roof by setting aside (or lowering, if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting / refixing / reconnecting in same / new location including writing date of cleaning on each tank with white paint, height / size of letters / figures not less than 10cm in height, complete all as specified and directed.
Supply and fix Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. HT F3001151 of Cera or equivalent in other makes specified complete after taking down old bib taps all as specified and as directed.
Supply and fix Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F3002101 of Cera or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.
Supply and fix in repairs, Stop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces, complete all as per Cat No.HT F4050103 & HT F3001351 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.
Supply and fix in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed. MAKE:- Cat No. HT F3001201 of CERA or techno-commercially equivalent model in any one of the make as mentioned in list of makes here-in-after.
Supply and fix, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.
Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes, Make : Cat Part No S1050102 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.
Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified complete all as specified and directed.
Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or techno commercial equivalent in other makes complete all as specified and as directed.
Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm all as per Cat No. No. S2040103 of Cera or techno and commercial equivalent makes specified including supply and fixing 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with PTMT waste coupling of 32 mm dia (minimum weight 45 grams), all as specified and as directed.
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and as directed.
Supply and fix in repairs Ball valves of 20 mm dia , (minimum weight 210 grams) , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
Dismantling of unserviceable floor / Nahani trap, supply and fix UPVC(SWR) floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.
Supply and fix UPVC (SWR) bends any radius 110 mm dia without oval access door, fixed in pipes, complete all as specified and as directed.
Solar Electricals and Electronics
SCION ENTERPRISES
Bikarma Enterprise
ARCHANA CONSTRUCTION CO
ABHISHEK CONSTRUCTIONS
AishwaryaConstructions
VARALAKSHMI CONSTRUCTIONS
VP DEVELOPERS AND CONTRACTOR
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .