PROVN OF OTM ACCN FOR ASC BN (PH-II) AT DINJAN MIL STN UNDER GE DINJAN

Amount

Note:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender documents, all drawings & all corrigendum/ amendments and General conditions of contracts before entering / quoting the rates. Lumpsum price worked out by the tenderer for BUILDING & STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price workedout by the tenderer for SITE CLEARANCE, SITE DEVELOPMENTS & EARTH WORKS as listed in Schedule ‘A’ Part-II.

Lumpsum price workedout by the tenderer for INTERNAL WATER SUPPLY & HOT WATER SUPPLY as listed in Schedule ‘A’ Part-III.

Lumpsum price workedout by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-IV.

Lumpsum price workedout by the tenderer for ROAD, PATH & CULVERT as listed in Schedule ‘A’ Part-V.

Lumpsum price workedout by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI.

Lumpsum price workedout by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII.

Lumpsum price workedout by the tenderer for SECURITY FENCING & GATE as listed in Schedule ‘A’ Part-VIII.

Lumpsum price workedout by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX.

Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-X.

Lumpsum price workedout by the tenderer for AIR CONDITIONING, REFRIGERATION & WATER COOLER as listed in Schedule ‘A’ Part-XI.

NOTE: Schedule 'A' Part-XII (MISC B/R, E/M SERVICES) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling / forming embankments including raising (any height from existing GL) / lowering by approved earth and including raising earth spreading in layers not exc 30 cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high / depth from EGL. Notes :- (i) Earth required for the item, shall be supplied by contractor, from out side MOD land of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (iii) With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment/traverse of filled earth after consolidation/compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk. (iv) Total quantity / partial quantity of earth may not be available in Dinjan area. The contractor shall bring the earth outside area and it is advised to quoted the rate considering availability of soil and its lead involved.

Stop valves fancy type, quarter turn, chromium plated, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for unions and of size 15 mm bore complete all as specified and as directed. Make : Jaquar Code No. FLR-5053N or equivalent model of make list as given in Appdix "B".

Bib taps quarter turn type, cast copper alloy screwed down fancy type chromium plated, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and as directed. Make : Jaquar Code No. VGP-81037 or equivalent model of make list as given in Appdix "B".

Brass chromium plated superior quality three hole basin mixer (quarter turn type) 15 mm dia with out popup waste system with 450 mm long copper pipe complete all as specified and directed. Make : Jaquar Code No. FLR-5191N or equivalent model of make list as given in Appdix "B".

Brass chromium plated wall mixer 3-in-1 system (quarter turn type) with provision for both hand shower and overhead shower complete with 115 mm long bend on upper side, connecting legs and wall flanges complete with all accessories. Make : Jaquar Code No. FLR-5281N or equivalent model of make list as given in Appdix "B". Note :- (i) The above mentioned Sl item Nos. 12.02 to 12.05 shall be incorporated to the buildings listed at Serial Item Nos. 08 & 09 of Schedule 'A' Part-I.

Material and Labour for thermoplastic reflective paint for marking of 2.50 mm minimum thickness of single coat in centre line, edge line and zebra crossing road marking of 150 mm width or as directed on bituminous surfaces in white/yellow by indigenous modern propelled road marking machine including glass beads conforming to BS-6088 and MOST specifications including cleaning all dirt, scales, grease and foreigh material etc. complete all as specified.

Material and Labour for 3 layered fusion welded PP-R (polypropylene Randocm Co -Polymer) gate valve (brass insert as pre requirement of the site with handle, screwed both ends for PP-R pipes or for unions fixed of grade SDR - 7.4 (PN-16) and size 75 mm complete all as specified and directed.

Material and Labour for horizontal boring / drillling by machines / manually under the road, pavement, hardstanding, etc. in any type of soil without cutting / disturbing the existing road for inserting PPR pipes / CI pipe / GI pipe of any size complete all as specified and as directed. Note :- Pipes shall be measured and paid separately under respective schedule.

S & F Modular blanking plate 1 module suitable for modular switch boards complete all as specified and as directed.

S & F Blanking plate for MCB DBs of suitable size complete all as specified and as directed.

S&F Epoxy Powder Coated Distribution Board, Double Door, VTPN 6 way, 18 module, Vertical Type (IP 43) with incomer as MCB and outgoing MCBs with common bus bar at incoming end of out going MCBs complete with allnecessary internal wiring and fixed complete all as specified and as directed.

S&F Epoxy Powder Coated Distribution Board, Double Door, VTPN 6 way, 18 module, Vertical Type (IP 43) with incomer as MCCB and outgoing MCBs with common bus bar at incoming end of out going MCBs complete with allnecessary internal wiring and fixed complete all as specified and as directed.

Supply and fixing MCCB 100 amps, 4 pole, breaking capacity 16 KA suitable for operation of 415 volts AC 50 HZ including making necessary electric connections complete all as specified and directed.

M&L for RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified and as directed.

M& L for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover 1 module complete all as specified and as directed.

Supply and fixing ceiling fan energy saving and fancy type 1200 mm (minimum) sweep three blade, 5 star BEE rating (minimum) without regulator including clamp set, hanging rod and necessary connecting PVC insulated Flexible cable of size 0.75 sqmm copper conductor for connection from ceiling rose to fan and connecting complete all as specified and as directed. Make: Model- ES-50 Premium of Havells or equivalent make as per Appendix 'B'.

Supply and fixing ceiling fan energy saving and fancy type 1400 mm (minimum) sweep three blade, without regulator including clamp set, hanging rod and necessary connecting PVC insulated Flexible cable of size 0.75 sqmm copper conductor for connection from ceiling rose to fan and connecting complete all as specified and as directed. Make: Model- Velocity ES-50 ISI of Havells or equivalent make as per Appendix 'B'.

Supply and fixing exhaust fan 230 mm (min) sweep MS CRCA body and metal blades with double bearing with self closing louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model- Ventil Air - DB of Havells or equivalent make as per Appendix 'B'.

Supply and fixing exhaust fan 300 mm (min) sweep MS CRCA body and metal blades with double bearing with self closing louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model- Ventil Air - DB of Havells or equivalent make as per Appendix 'B'.

Supply and fixing of LED batten surface/ceiling mounting box type light fitting 40Watt, with driver and high quality polycarbonate opal diffuser cover including & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Model STOUTPLUS1200BS40WLED857SPCWH or equivalent model of make list as given in Appdix "B".

Supply and fixing of LED batten surface/ceiling mounting light fitting 1 x 20 Watt, with driver and high quality polycarbonate opal diffuser cover including ultra bright glass LED Tubelight 20 Watt with high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Model REGALBATTENT8UPTO1X22WDSBSWH for batten & Model CRYSTAL1213T8DSTL20WLED865SGLASS for tubelight or equivalent model of make list as given in Appdix "B".

Supply and fixing of energy saving surface and wall mounted LED batten light fitting 1 x 10 watt, 230 volts with Aluminum housing & integrated electronic driver, environmental friendly & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95, 2.5 KV voltage surge protection complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Model LUMILINEPLUSBS10WLED865SPCSS or Jaquar Model LGLZ01X010XC or equivalent model of make list as given in Appdix "B".

Supply and fixing of energy saving suspended architectural LED light fitting 1 x 40 watt provides soft-light and glare free symmetrical illumination (with continuous mounting end cap), 230 volts with aluminum housing & integrated electronic driver, environmental friendly & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95, 2.5 KV voltage surge protection complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Model CONSTA1144LP40WLED830SPMMAWH or equivalent model of make list as given in Appdix "B".

Supply & fixing of Energy saving, environmental friendly, long life, exclusive innovative LED flood light fitting 30 Watt (minimum) made in pressure di- cast housing and heat sink in aluminium extrusion and IP 66 with heat resistant clear glass cover, suitable type gasket & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up 3 core 1 sqmm copper conductor flexible wire/cable complete all as specified. Make : Havells Model JETACOMPECTOFL30WLED757TG or equivalent model of make list as given in Appdix "B".

Supply & fixing of Energy saving, environmental friendly, long life, exclusive innovative LED flood light fitting 120 Watt (minimum) made in pressure di- cast housing and heat sink in aluminium extrusion and IP 66 with heat resistant clear glass cover, suitable type gasket & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up 3 core 1 sqmm copper conductor flexible wire/cable complete all as specified. Make : Havells Model JETAIRISFLS120WLED757ASYMLTG or equivalent model of make list as given in Appdix "B".

Supply and fixing of surface/ceiling mounting 4' x 1' LED luminaire light fitting 34/36 Watt, with driver and made of epoxy powder coated CRCA housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Bajaj Code BZSSLL 36W LED WH (SKYLUX LED) or Cat No. PLUTOSURFACE4X1PLS34WLED857S of Havells or equivalent model of make list as given in Appdix "B".

Supply and fixing of ultra slim panel (recess / pendant) (2' x 2') LED luminaire light fitting 36 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LSVR01S036XC or Cat No. ENDURASLIMPROPLUS2X2PLR28/36WLED857MOD of Havells or equivalent model of make list as given in Appdix "B".

Supply and fixing of surface mounted round panel LED luminaire light fitting 18 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LNRO02R018SC or Cat No. ENDURANEOHESURFACEDLS18WLED857S of Havells or equivalent model of make list as given in Appdix "B".

Supply and fixing of surface mounted round panel LED luminaire light fitting 12/15 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LNRO02R012SC or Cat No. ENDURANEOHESURFACEDLS15WLED857S of Havells or equivalent model of make list as given in Appdix "B".

Supply and fixing of LED mirror light fitting 9 Watt with electronic driver and made with decorative grey end and caps polycarbonate body and ribbed opal diffuser & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.50 sq. mm copper conductor flexible wire/cable complete all as specified.

Supply and fixing of surface mounted square panel LED luminaire light fitting 18 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LNRO02S018SC or equivalent model of make list as given in Appdix "B".

Supply and fixing of ultra slim LED panel (recess / pendant) (1' x 1') luminaire light fitting 20 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LSVR01S020XC or equivalent model of make list as given in Appdix "B".

Supply and fixing of energy saving recess mounting square LED panel (2' x 2') luminaire light fitting 24 Watt with electronic driver and made of white powder coated CRCA housing, with flat white high transmission acrylic cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Bajaj Code BZRSQL 24W XEi WH or equivalent model of make list as given in Appdix "B".

Supply and fixing of LED Decorative landscape wall light fitting 5 Watt with electronic driver and made of diecast aluminum housing with high quality polycarbonate opal diffuser cover, transparent temepered anti glare diffuser with IP 54 & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LFLT01S105XW or equivalent model of make list as given in Appdix "B".

Supply & fixing of new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, die-cast / spun aluminium housing, landscape LED light fitting 35 / 36 Watt with decorative opal polycarbonate diffuser and IP 65 protection grade & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Model CORALPT35WLED757PSYMTOPC or equivalent model of make list as given in Appdix "B".

Supply and fixing of LED surface mounted panel (2' x 2') luminaire light fitting 36 Watt with electronic driver and made of aluminum housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Jaquar Code LSVR01S036SC or equivalent model of make list as given in Appdix "B".

Supply and fixing of Energy saving environment friendly ultra modern surface mounted decorative oval bulkhead LED luminaire 9/10 Watt comprising of high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 including electronic ballast, lamp holder, etc. including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Bajaj Code 112334 BIBWP 10W LED or Jaquar Code LBLK01X010XC or equivalent model of make list as given in Appdix "B".

Supply , Fixing & testing of new generation energy saving and environmental friendly long life LED street light fitting (Building Security light) of 20 Watt with electronic driver and made of pressure die cast aluminium housing with high power LED's as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 25 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make : Havells Model ENDURAPEARLSL20WLED757SASYTOPC or equivalent model of make list as given in Appdix "B".

Supply , Fixing & testing of LED street light fitting of 45 Watt, driver and made of pressure die-cast aluminum housing, IP 65/IP 66 road way luminaries with UV stabilized polycarbonate cover or toughen glass cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 40 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.20 mtr long complete with MS flat iron clamp (clamps shall be 25 x 6 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection with two core 2.50 sqmm flexible copper conductor to control street light from ceiling rose to street light fitting complete all as specified and directed. Make : Code No 169931 BRTFG 45W LED I of BAJAJ or Jaquar Code LSRT01S045XW or Cat No. ENDURAPEARLNEOSL45WLED757SASYTOPC of Havells or equivalent model of make list as given in Appdix "B". Note :- For items No. 12.20 to 12.39 : Warranty of complete LED luminaries fitting shall not less than three years and Life expectancy of LED's minimum 50,000 burning hrs.

Supply, install , testing and commissioning of Litium Based Energy Efficient Integrated LED Solar Street Light 32 Watt including GI pole duly painted with aluminium paint 6 meter long in single FRP body encases Solar PV Panel 44/46 Wp monocrystalline, Lithium Baterry 11.1/12.8 V, 24.4 AH.0 AH with inbuilt BMS, high brightness W-LED (160-180 Im/Watt) with reflector, CRI > 70, colour temperature 6500K, microcontroller based charge controller cum driver, automatic dimming functionwith PIR motion sensor, Dusk to Dawn Operation, working temperature (-) 10 degree C to (+) 50 degree C, weight 10-12 Kg with adjustable MS clamp suitable for pole / wall mounting protections, short circuit, overload, reverse polarity and baterry protections. Model : Axxon AXN-32 Watt of Make Axxon Tech Industries or equivalent model of make as mention Appendix "B". Note : (i) Necessary excavation & earth work, PCC work for foundation & coping will be measured & paid separately. (ii) The street lighting system (including the battery) shall be warranted for a period of five years from the date of completion of works. (iii) The firm shall produce Vital Parameters Test Report from NABL Accredited Lab and shall be made in India Only.

Timer switch multi functional digital astro type (having a longitude and latitude of Indian City in Memory), 250 volt, single phase of 20 Amps rating with suitable contactor with and including steel metal enclosure and other accessories.

Supply & fixing of transparent street light junction box of size 205 mm x 255 mm x 112 mm made of high quality polycarbonate IP-66/67 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper bus bar 25 x 5 mm -04 strip and fixing complete with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: HENSEL Cat No KF 2500G or equivalent model of BCH/LEGRAND

Supply and fixing of AC single phase Static Energy Meter of accuracy class 1.0, 240 volts, 50 Hz with backlit LCD display of rating 5-30 Amps with Box complete. Make : L&T Model WM101BC5DL0BOX or equivalent model of make list as given in Appdix "B".

Supply and fixing of AC three phase Static Energy Meter of accuracy class 1.0, 3 x 240 volts, 50 Hz with backlit LCD display of rating 10-60 Amps BM with hinge type Box complete. Make : L&T Model WR300BC73BOXH or equivalent model of make list as given in Appdix "B".

Supply, installation, testing and commissioning of wall split unit ( both inner and outer unit) air conditioner electrical driven with cordless remote control unit and with inbuilt heating and cooling arrangement and digital inverter twin rotary, single phase of capacity 2.0 TR with all insulated copper tube, 3 core PVC wire suitable size complete all as specified.

Supply, installation, testing and commissioning of wall split unit ( both inner and outer unit) air conditioner electrical driven with cordless remote control unit and with inbuilt heating and cooling arrangement and digital inverter twin rotary, single phase of capacity 1.5 TR with all insulated copper tube, 3 core PVC wire suitable size complete all as specified.

Supply, installation, testing and commissioning refrigerator electric driven single phase capacity 310 litres frost free, BEE four star rated, double door, direct cool complete all as specified.

Supply, installation, testing and commissioning refrigerator electric driven single phase capacity 210 litres frost free, BEE four star rated, double door, direct cool complete all as specified.

Supply, installation, testing and commissioning refrigerator electric driven single phase capacity 170 litres frost free, BEE five star rated, double door, direct cool complete all as specified.

Supply and fixing voltage stabilizer for automatic operation, single phase with neutral, air cooled indoor type and designed for input voltage variation between 170 volt to 260 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and capacity of 0.5 KVA complete all as specified and as directed.

Supply and fixing voltage stabilizer for automatic operation, single phase with neutral, air cooled indoor type and designed for input voltage variation between 170 volt to 260 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and capacity of 1 KVA complete all as specified and as directed.

Supply and fixing voltage stabilizer for automatic operation, single phase with neutral, air cooled indoor type and designed for input voltage variation between 170 volt to 260 volt with output voltage stabilized at 230 volt with accuracy of +/- 2.5% and capacity of 5 KVA complete all as specified and as directed.

Supply, installation, testing & commissioning Pre-filter of single candle with enclosure for filtering impurities upto 5 micron complete all as specified and directed. [Note :- To be fixed at inlet of water coolers] Make : Aquaguard/Kemflo

Supply & fixing Automatic source Changeover with current limiter, triple pole and neutral, 415 volts of capacity 80A / 63A fixed on wall or any other locations including suitable sheet metal enclosure indoor type, 2 mm thick and connections complete all as specified and as directed. Make : Model No. DHACOTT8063 of Havells or equivalent model of make list as given in Appdix "B". Note :- (i) This Item shall be incorporated to the buildings listed at Serial Item Nos. 01, 04 & 08 of Schedule 'A' Part-I.

Preparation of Periodical Services Measurement Book (PSMB) for buildings as per MES procedure by calculating area of painting on internal & external walls surfaces, painting on all exposed surfaces, painting on ceiling surfaces, painting on wooden & steel surfaces with proper summary as per standard formatt complete for the buildings as catered under Schedule 'A' Part-I Serial Item Nos. 01 to 32 all as per directions of Engineer-in-Charge. Note : Payment of all the PSMB of the above buildings shall be considered as one job.

Subtotal of Schedule "A' Part-XII

Lumpsum price worked out by the tenderer for Provisional sum of ` 7,16,800/- for following items including of earth work, concrete work, steel section etc. complete all as directed. (i) Football / Hocky Ground (100 m x 80 m) (Approx) : 02 Nos (ii) Parade Ground (73 m x 73 m) (Approx) : 01 No (iii) PCC Hard Standing (80 Sqm) (Approx) : 01 No Note:- (i) Contactor shall quote, contractors percentage (amount) plus/minus the pre-prices amount. (ii) The works under provisional sum shall be executed wholly or in part and to the extent and specifications as order by the GE in writting. The work shall be measured and paid as applicable rates in MES Schedule Part-II (2010) adjusted by the contractor's percentage quoted by the tenderer for provisional sum. The items not available in MES Schedule shall be priced in terms of condition 62(G) of IAFW - 2249 and in that case percentage quoted by the contractor shall not be applicable for that particular items.

AKM CONSTRUCTION AND ENGINEERING CO.

M/s Singh enterprises

Phoenix Infra

Bidder Name

AKM CONSTRUCTION AND ENGINEERING CO.

M/s Singh enterprises

Phoenix Infra

M/s Capiotal Enterprise