REPAIRS TO PERIMETRE FENCING, PATH

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete / brick masonary etc and and making good disturbed ground complete all as specified and directed by Engr-In-Cahrge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,all as specified and directed by Engr-In-Cahrge.

Dismantling Chain link fencing wire mesh or barbed wire any type all as specified and directed by Engr-In-Cahrge.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt n exc 5cm long complete all as specified and directed.

M & L for cement concrete type B-2, 1:2:4 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate complete) all as specified and directed.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of starndards, rails, straining bolts etc including provision of binding wire complete Notes : Chain link fencing, nut bolts, and line wires shall be measured separtely under supply only rate.

Supply only mild steel galvanised chain link fencing 4mm dia of any size or type.

S&F 10mm dia and over mild steel round bars in chain link fencing completeall as specified and directed.

Restraining and resecuring of existing barbed wire fencing complete including making good staples etc all as specified and directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (eachline wire to be measured) all as specified and directed.

M&L Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of brickwork or masonry built in cement mortar including all quoins arches pillars etc all as specified and directed by Engineer in charge.

M&L for rendering 15mm thick on fair faces of brickworks or on concrete surface in cement morter (1:4) complete all as specified and directed by Engineer in charge.

M&L for 3 coat of white wash on newely plastered surface on wall, all as specifeid and directed by Engr-In-Charge

M & L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for coping all as specifeid and directed by Engr-In-Charge.

Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed by Engineer in charge.

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 and n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

M & L for TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for TMTbars 05mm dia and over upto and incl 10mm dia in stirrups cut to length, bent to shape required,including cranking, bending spirally etc. and binding with and including MS (annealed )wire not less than 0.9 mm dia.

M & L for plain cement concrete 1:3:6 type C2using 40mm graded stone aggregate as in surface channels and drains all as specified and directed

M & L for brickwork with sub class bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

M&L for hardcore of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface.

M&L for machine pressed precast concrete interlocking paver block 60mm thickness, M-35 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 over 50mm sand cushining complete all as specified and directed.

Use and waste of form work square ,rectangular or polygonal to sides of pillars posts,struts,piers, coloum and stanchions for fair finished surface

M&L for interlocking paver tiles 25mm thickness, with grey cement & pigment any shape and size set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for chequrred cement concrete tiles 300x300x 25mm thickness, with grey cement & pigment set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M &L 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregates) as in floors/hardstangs etc.

M/s Rahul Traders