8125/SAR-T-19/2025-26 PROVN OF GROUND DEFENCE CONTROL CENTRE (GDCC) AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Surface dressing n.exc (not exceeding) 15 cm deep and and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches for foundation etc not exc 1.5m wide and not exc 1.5 m in depth in any type of soil complete all as specified and directed.

Returning filling in including spreading levlling ,watering and well ramming in layers nexc 25cm thick complete all as specified and directed.

Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point complete all as specified and directed.

Earth filling under floors including spreading, leveling, watering and well ramming in each layers not exc 25 cm thick complete all as specified and directed. Note :- Soil obtained from excavation under item 2.00 here-in-before shall be used for filling.

M & L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and directed.

M & L for brick work in cement mortar (1:6) Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in complete all as specified and directed.

M & L for brick work fly ash old size bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:6) complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, of flat surface, rough finidshed complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work n exc 200mm thick of flat surface, finished rough complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, fair finidshed complete all as specified and as directed.

Formwork to sides and soffits roof beams, lintels of flat surface , finished rough complete all as specified and directed.

Formwork as in chajjas flat finished rough complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Formwork to sides of pillars, posts,struts piers,columns and stanchions (square, rectangular, polygonal on plan) rough finished complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded aggregates) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

All as per Item No 17.00 here-in-above but in chajjas complete all as specified and directed.

M & L for 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregates) as in plinth prorection surface finished fair and even complete all as specified and directed. Note: Plinth protection shall be width as directed and shall be laid to slope 1.30 in alternative bays not exc 3 m in length. Joints 6 mm wide and 10 mm deep shall be provided along with wall and bays and same shall be filled with bitumen mastic (1:3).

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded aggregate) columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia complete all as specified and directed.

All as per Item No 21.00 here-in-above but for dia exc 5mm dia and over upto and including 10mm dia in stirrups,spaces and binders complete all as specified and directed.

M & L for hardcore of gauge n exc 63mm , deposited , spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for providing cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished smooth and even without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and incl. mixing water proofing @ 2% compound and finished fair and even without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar (1:3) and finished fair and even without using extra cement complete all as specified and directed.

M & L for 25mm thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

M & L for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

M & L glazed ceramic coloured tiles in vertical surfacaes 350 x 250 x 7mm /450 x 350 x 7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4) and finished even and fair for receiving tiles complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including screed bed or bedding layer 15 mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and as directed.

M & L Kota stone slab 20 to 25 mm thick in, riser to steps ,skirting dado and pillers laid over cement screed and jointed with pigment to match the shade of the slab including rounded edge etc, rubbing and polishing over 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L kota stone with machine cut kota stone slab flooring 20-25 mm thick set jointed and pointed in neat cement slurry with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed cement mortar (1:6 ) complete all as specified and directed.

M & L for screed laid 15mm thick in cement mortar (1:4) as in roof over green concrete surface finished even and smooth using Liquid WPC complete all as specified and directed. Note :-Liquid WPC will be measured and paid seperately.

M & L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified and directed.

M & L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying two coat exterior emulsion paint over a coat of primer paint any tint complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified and directed.

M & L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

S & F Drapery rod 25mm dia decorative type in wooden finish with brackets and side holders complete all as specified and directed.

M & L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. Note : Glazing/penelling measured and paid saperately in respective items.

S & F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and directed.

S & F Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to but prelaminated both side with decorative choice lamination complete all as specified and directed.

M & L for Sheet glass, ordinary quality of any colour 5.50mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement complete all as specified and directed.

S & F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified and directed.

S & F 140mm Floor door stopper of aluminiumalloy body and tongue, anodised, with hard drawn steel spring,fixed in floor, but of brass body and tongue with hard drawn steel spring complete all as specified and directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed.

S & F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed.

S & F extruded aluminium alloy handles 150mm size fabricated type anodised, ISI marked complete all as specified and directed.

S & F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 100 mm PVC floor trap with CP grating incl jointing to waste pipe incl fixed in cement concrete type B-1 (1;2:4) ccomplete all as specified and directed.

Cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and directed.

S & F GI tubing in 20mm bore medium grade with all fittings and fixed complete walls and ceilings or laid in floors complete all as specified and directed.

S & F GI tubing in 15mm bore medium grade with all fittings and fixed complete walls and ceilings or laid in floors complete all as specified and directed.

S & F GI tubing in 40mm bore medium grade with all fittings, screwed and fixed complete walls and ceilings or laid in floors complete all as specified and directed.

S & F for 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S & F for 15mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F for 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F bib taps 15mm dia Chromium Plated with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed.

S & F for PVC connections 45 cm Long incl 15mm bore fly nuts on both ends complete all as specified and directed.

S & F for 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F for 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass and fixed complete all as specified and directed.

S & F 15mm dia pillar tap cast copper alloy with capasten head chromium plated screwed down high pressure with or with lettered hot and cold with long screwed shanks and fly nuts complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints fixed to walls, 50mm dia complete all as specified and directed.

S & F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints 100mm dia laid in trenches complete all as specified and directed.

S & F CI cowls , 50mm dia complete all as specified and directed.

S & F Stack clamp out of 50mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 100mm bore piece complete all as specified and directed.

S & F Stack clamp out of 50mm x5mm flat iron stays including bolt and nuts and securing ends of stays to walls or roof for 75mm bore piece complete all as specified and directed.

S & F vitreous china counter top basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed.

S & F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed.

S & F vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed to water supply pipe etc complete all as specified and directed.

S & F vitreous china urinal partition slabs terminating about 40cm above floor line ,white of size 310 x 700mm etc complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M & L for PCC Type C2 (1:3:6) (using 40 mm graded aggregate) as in Cement concrete in foundations, filling and mass-concrete ccomplete all as specified and directed.

S & F salt glazed stone ware drain pipe 150mm internal dia conforming to IS laid in trenches and joinged in cement mortar (1:2) completed all as specified and directed

M & L for concreted bed to drain pipes in PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against the sided of pipe after they are laid in slop and tested for 150mm bore sewer line complete all specified and directed.

M & L for RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast manhole covers, septic tank etc and set in cement mortar (1:4) complete all as specified and directed.

S & F PVC SWR pipes single socketed, in any length, 110 mm dia, with rubber ring joints fixed to walls, complete all as specified and directed.

S & F 110mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed.

M & L for PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in surface channels & beds of drains including smooth finish complete all as specified and directed.

M & L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.

M & L for PCC (1:3:6) type C-1, (using 20mm graded stone aggregate) as in inlets upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string coarses, lacing, drain channel, coping, parapets, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

M & L brick work with subclass 'B" bricks old size bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:6) complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on stone masonary surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound complete all as specified and directed. Note: Supply only water proofing admixture shall be measured and paid separately.

M & L for RCC NP3 150 mm dia pipe laid on 150 mm thick screed bed PCC (1:4:8) with excavation in any type of soil for depth 0.70-1.65m, including manholes/ drop manholes of standard size made of brick masonary/RCC/Precast RAA with SFRC ventalating cover and frame, includes all items and activities to execute and make sewer line functional complete all as specified and directed.

M & L for provising 75 mm thick precast SFRC drain cover without frame but including complete sides iron sheet (medium) complying to the standard specifications as mentioned in the IS-12592 BIS standard minimum load bearing capacity 5 ton/Sqm in square or rectangular shape complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section), in cement mortar (1:2:4), type B-1 smooth finished and reforning benching as required complete all as specified and directed.

S & F galvanised pipe 40 mm dia (1.5") medium grade including all fittings complete all as specified and directed.

S & F galvanised pipe 25 mm dia (1") medium grade including all fittings complete all as specified and directed.

S & F galvanised pipe 20 mm dia (3/4") medium grade including all fittings complete all as specified and directed.

S & F gun metal gate valve screwed of size 40 mm dia (1.5") complete all as specified and directed.

S & F gun metal gate valve screwed of size 25 mm dia (1") complete all as specified and directed.

S & F gun metal gate valve screwed of size 20 mm dia (3/4") complete all as specified and directed.

M & L for construction of brick masonary valve pit of size 60 x 60 x 60cm (internal dimension) with MS top cover of 3mm thick, fixed on frame made out of angle iron 40 x 40 x 6mm thick with locking arrangments incl two coats of synthetic enamel paint over a coat of red oxide primer to MS sheet internally and externally & iron surface, brick work in cement mortar (1:4), 15 mm thick plastering in cement mortar (1:4) ( internally and externally), 150 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) for base 100 mm thick plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) for coping and two coats of white wash internally after preparation the surface complete all as specified and directed.

M & L for test point terminal block made of gun metal or phosphours bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screws complete all as specified and directed.

S & F single pointed air termination aluminum rod 12mm dia, 300mm lonng complete all as specified and directed.

S & F aluminum strip 25mm x 3mm complete with saddles and fixing with screws for sitting the strip complete all as specified and directed.

S & F GI strip 32mm x 6mm buired in ground complete all as specified and directed.

M & L for providing cement concrete block form kerbs or mud stops rounged or chamfered on edges of size 150 x 150 x 300 mm, type B-1 (1:2:4) (using 20 mm graded stone aggregates) complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6 mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) & including adequate quantity of charcoal dust and common salt all around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed. NOTE : Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M & L for point wiring with 1.5 Sqmm (22/.3mm) PVC insulated and unsheathated single core standard copper conductor for one light/fan and including PVC regid non metalic concealed conduit medium grade 19/20 mm dia to be termiated in pressed steel terminal boxes with 3 mm thick bakelite sheet top cover including 1.5Sqmm (22/.3mm) PVC insulated and unsheathated FRLS single core standard earth contunity conductor by one switch and / or one regulator complete including suitable MS sunken boxes with cover plate for modular switches and sockets incl repairing the surface in cement mortar (1:4) and finishing the surface as per existing treatment complete all as specified and directed. Note: (i) Switches and regulators shall be measured and paid separately. (ii) Wiring shall be done as per colour code in IS phase, neutral and earth.

All as per Item No 116.00 here-in-above but for one 5 Amp socket outlet point on independent board but with other switches complete all as specified and directed.

All as per Item No 116.00 here-in-before but for one socket outlet 3 pin 15 Amps independent board using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed FRLS single core cable for stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

S & F switch 6 amps one module 230V modular type one way complete all as directed.

S & F socket outlet 6A-2/3 Pin combined 2 module for 5Amp plug to 230V complete all as specified and directed.

S & F switch modular 16A single pole one way one module 230V complete all as specified and directed.

S & F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S & F ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and directed.

S & F LED 2 x 2 panel light 36/40 watts IP65 surface/recess made up of CRCA body complete all as specified and directed.

S & F 20W LED tube light alongwith fixture complete all as specified and directed.

S & F 10W 220V AC LED light fittings mirror type with high out put diffuser 2 feet, decorative type with driver holder and LED lamp incl connecting up with three core flexible copper connductor cable of suitable size complete all as specified and directed.

S & F Lamp holder with LED bulb 8W, PVC/polycarbonate bakalite type with back plate suitable for batten fittings complete all as specified as directed

S & F ceiling fan of 1200mm sweep, 230V, BEE 5 star rated complete with electronic type regularor and all accessories complete all as specified as directed

S & F exhaust AC single phase of 300 mm sweep, 230/240V, with louver complete with all accessories complete all as specified as directed

S & F exhaust fan made of strudy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding of sweep 250m complete all as specified and directed.

S & F 10W LED street light with IP65 complete all as specified and directed.

S & F Sirens electronic type horizontal single stage continous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output of +5DB for 2000 meter complete all as specified and directed.

S & F wiring for circuit / submain wiring alongwith earth wire in PVC conduit of size 2 x 10.0 Sqmm+ 1 x 10.0 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ ressesed as required complete all as specified and directed.

S & F sheet metal enclouser V TPN 4 way double door DB suitable for MCCB 63A as incommer, IP-43 busbar neutral link earth bar and din rail with gasket complete all as specified and directed.

S & F sheet metal enclouser for DBs made of CRCA mild steel of rating SPN, 8 way, double door, 230 volts complete and fised in existing metal box complete all as specified and directed.

All as per Item No 135.00 here-in-above but for 4 way, double door, 230 volts complete all as specified and directed.

S & F 4 pole, MCCB, 16 to 63 Amps, 50 Hz, 415 volts with rupturing capacity 25 KA complete all as specified and directed.

S & F SPN 240 volts, 63 Amps capacity fixing in DBs incl proper thimble connections complete all as specified and directed.

S & F single pole, MCB, 6 to 32 Amps, capacity fixing in DBs incl proper thimble connections complete all as specified and directed.

M & L for flame proof wiring with single core PVC insulated and unsheathed 1100 volts grade FRLS electric cable with standard copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enamaled black conduit heavy duty ISI marked of size 20 mm dia on surface/ wall/ ceiling including all flame proof conduct fittings and accessoires such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light/fan point controlled by one flame proof rotary switch SP one way and including drawing continous earth wire FRLS PVC unsheathed 1100V grade cable with standard copper conductor of size 2.5 Sqmm and connected to earth dolly complete all as specified and directed.

S & F flame proof/ weather proof direct entry ratary switch single pole ON & OFF rotary motion switch in cast aluminum alloy LM-6 enclouser epoxy powder coated single pole 230 volts , 10 Amps AC ON/OFF switch operated externally by knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on wall/steel strucuture etc complete all as specified and directed.

S & F 1x 16 W flame proof LED light fiting, CMRI certified recommedned for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP-65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holder, connector etc, complete with all accessories prewired and incl connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Note: (i) All fittings shall be ISI marked and shall have approval of CMRI Dhanbad. (ii) Original test certificate of Manufacturer's shall be produced by the contractor.

S & F cable duct having size 45mm wide and 45mm height duly concealed in walls complete all as specified and directed.

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3363405)