Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹29.9 LAdmitted-Finance VASHISTHTH READYMADE ELECTRICAL UN UN MOHALLA SUBHASH NAGAR MUZAFFARNAGAR UTTAR PRADESH 247778 | SHAMLI | UTTAR PRADESH | 247778 | -30.75% | ₹29.9 L | L1 | Admitted-Finance |
| 2 | L2₹32.1 L+₹2.2 L (7.22%)Admitted-Finance | -25.75% | ₹32.1 L+₹2.2 L (7.22%) | L2 | Admitted-Finance |
| 3 | L3₹32.6 L+₹2.6 L (8.77%)Admitted-Finance | -24.68% | ₹32.6 L+₹2.6 L (8.77%) | L3 | Admitted-Finance |
| 4 | L4₹33.2 L+₹3.2 L (10.8%)Admitted-Finance SATAKSHI TRADING CO 775 J K COLONY SWARAG ASHRAM ROAD KRISHNA NAGAR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | -23.26% | ₹33.2 L+₹3.2 L (10.8%) | L4 | Admitted-Finance |
| 5 | L5₹34.5 L+₹4.6 L (15.4%)Admitted-Finance | -20.10% | ₹34.5 L+₹4.6 L (15.4%) | L5 | Admitted-Finance |
Tender Value
₹43.2 L
EMD Value
₹86,463
Closing Date
17 Feb 2026, 12:00 pmClosed
CE MeDA
CE Office MeDA Campus, Meerut
Installation work of street lighting system on the 30-meter wide road from Police Enclave to Gautam Enclave in Lohia Nagar scheme.
2026_MDAUP_1111644_1
28205_1 Dated 29 January 2026
Open Tender
Electrical Works
Percentage
180 days
Meerut
Tender Fee, EMD and other documents as per the Tender/NIT
2 documents required · 2 mandatory
₹3,450
As per the Tender/NIT
₹86,463
7 May 2026
4 Feb 2026
18 Feb 2026
4 Feb 2026
17 Feb 2026
4 Feb 2026
4 Feb 2026 - 17 Feb 2026
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single armbracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (SI No-641/2018)
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 120 Watt. Confirming to IP 66 Protection complete in all respect as per direction of E/I. Cat-AAA S. No. 1424/SOR 2018
Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SI No-652/2018
501 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (h) 10sq.mm 4 core
501 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16sq.mm 4 core
S&F of 63 Amp. 415 V matal clad TPN Rewirable type switch fuse unit complete on angle iron bracket complete in all respect. CAT-B. S.O.R.-18 316
Supply & Burying of Earth Rod 20mm dia 2.50 mtr long (PSR)
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect.CAT- AAA SI. No 1455/SOR 2018
S / L of HDPE ( Dwc pipe for road crossing etc. (Pre sanction Rate) ( i ) 76 / 63mm ( O.D / I.D )
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI No-504/2018 16 sq. mm (d)
504 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (c) 10sq.mm
1002 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT- A
Supply of 2.5 mm x 2 Core aluminium unarmourd Cable (PSR)
Making manual Trench less/Road cutting. (PSR)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
BOQ_2054446.xls
BOQ • 0.23 MB
28205EBID.pdf
Tender Documents • 0.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .