GE 874/EWS-04/2024-25

Amount

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

(a) One light /one fan/one bell point controlled by one switch.

(b) One socket outlet 5 pins 5 amps controlled by one switch on same board.

(c) One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F Bell Push Flush Type single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 5 amp, complete all as specified and directed.

S & F switch socket combination 2 in 1, 5A flush type all as specified and directed by Engr-in-Charge

S&F switch piano flush button single pole, one-way 15 Amps complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pins 15 amp, complete all as specified and directed.

S&F switch socket combination 3 pin 16A, flush type, complete all as specified and directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

S&F LED bulb 5W suitable for fixing in PVC angle holder complete all as specified and as directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 6-32 amp complete all as specified and directed.

MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C’ series, all as specified and as directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 10 sqmm complete all as specified and as directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and as directed.

M & L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed.

Supply and fixing in replacement Circular/Square (as per site Requirement) shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement Circular/Square (as per site Requirement) shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement Circular/Square (as per site Requirement) shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 base with 1x20 watt LED lamp complete all as specified and directed.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing complete all as specified and directed.

S&F of heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and directed.

S&F heating element with new one capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and directed.

S&F in repair thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cutout and including testing, complete all as specified and directed.

S&F in repair of copper Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete alla specified.

Supply & Fix table Lamp, Designer hanging type 10 Watt, with designer ceramic or designer glass are dome of 600mm, enamelled bronze /stainless steel base with LED lamp, including necessary wiring and accessories required ,with terminal connection / PVC/ Polycarbonate , isolated body complete all as specified and directed.

Supply and fixing in replacement Exhaust fan AC single phase, 1200 rpm 230/240V of size 250mm sweep with louvre heavy duty. complete all as specified and directed.

Supply and fix in replacement, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated, all specified and as directed.

Supply and fix in replacement, water heater storage type, electric capacity 10 ltr along with all accessories BEE 5 star rated, complete all as specified and directed.

Supply and fix 12W Solar Garden Light for garden water Proof (Warm/cool White) IP 65 unbreakable garden lamps for outdoor, Rust proof LED bollard light (2Ft) complete all as specified and directed.

S&F Motion Sensor 10 Watt Light circular/Square shape 6500K Neo surface white radar Polycarbonate downlighter, Auto on off ceiling light, surface mounted no false ceiling required, Flicker Free instant start operate on AC current, voltage range 100V-300V , input Voltage- complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Supply & Laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables of following sizes.

70 sq mm, 3.5 core

50 Sq mm, 3.5 core

35 sq mm, 3.5 core

10 sq mm, 2 core

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation laying of pole stay assembly and laying of LT cable as in any type of soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and wall ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to underground cables 8 cm below the cable before laying and 15cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.

S&F mild steel cross arms bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint after preparation of surface, including taking down unserviceable/old cross arms, complete all as specified and directed.

M&L in replacement of ACSR conductor of any size and any type (as reqd on site) including stretching, fixing and binding to insulator on OH LT/HT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified and directed.

M & L for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000(HT) volts grade. Including taking down old unserviceable pin insulator complete all as specified and directed.

M & L for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia for 1100 (LT) volts grade. Including taking down old unserviceable pin insulator complete all as specified and directed.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified.

S&F LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 90-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F in replacement steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-55 (11.0 metres long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally & portion embedded in concrete, making five black & red bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height complete all as specified and directed.

S&F on load change over switch 415 volt in sheet metal enclosure 3/4 pole of capacity from 63 Amp to 250 Amp complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Al conductor cable of size 50 to 95 sqmm (as required on site) complete all as specified and directed.

Supply and fixing copper thimble of size 25 to 120 Sqmm, complete all as specified and directed.

Material and Laying for Cement concrete 1:4:8 (using 40mm graded stone aggregate) in foundation of poles / Strut including necessary frame work complete all as specified and directed.

Material and Laying for Cement concrete 1:3:6 (using 40mm graded stone aggregate) in stay assembly etc foundation including necessary frame work complete all as specified and directed.

Material and Laying for Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping (coping to be of .6 m tall and 0.6 m in dia) and stay assembly complete all as specified and directed.

Supply, installing, testing and commissioning of Air-break, gang operated, triple pole switch, outdoor, horizonal mounting type (ISI marked), mechanically operated with electrical isolation , mounted on insulators and steel frame with operating mechanism worked from ground level and including operation rod of 25mm dia medium grade GI pipe with and with locking arrangement including Godrej pattern 65mm pad locks with two keys for current rating 200 amp HT 11 KV with and including drop fuse set with 12 insulators and making all incoming/outgoing connections including two coats of aluminium paint over a coat of red oxide primer on steel surfaces, complete all as specified and directed.

Re stretching of LT/HT ACSR conductor and GI wire of any size and on any type of poles carrying upto six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including refixing /re-adjusting line spans, line separators, cross arm on poles complete all as specified and directed.

Cutting/Trimming/Chopping of tree trenches along the overhead line up to 3m from electric line clearance on both side of HT/ LT lines and disposing off the cut tree / Branches site to a distance not exc. 50m and clearing the site as directed.

M&L for painting to HT poles, 11 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole up to 5 feet each strip of 30 cm height complete all as specified and directed.

S&F of MCCB 630 Amp 3 Pole 415 Volt breaking capacity 50kA complete all as specified and directed.

S&F of MCCB 400 Amp 4 Pole 415 Volt breaking capacity 36kA complete all as specified and directed.

S&F of MCCB 250 Amp 4 Pole 415 Volt breaking capacity 36kA complete all as specified and directed.

S&F of MCCB 200 Amp 4 Pole 415 Volt breaking capacity 25kA complete all as specified and directed.

S&F of MCCB 125 Amp 4 Pole 415 Volt breaking capacity 16kA complete all as specified and directed.

S&F of MCCB 25-100 Amp 3/4 Pole (As per site Requirement) 415 Volt breaking capacity 16kA complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of ser item No-81 above but 25mm.

All as per description of ser item No-81above but 40 mm.

All as per description of ser item No-81above but 50mm.

All as per description of ser item No-81above but 80mm.

S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

All as per description of ser item No-86 above but 25mm.

All as per description of ser item No-86 above but 40mm.

All as per description of ser item No-86 above but 50mm.

All as per description of ser item No-86 above but 80 mm.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20mm complete all as specified and directed by Engr-in-Charge.

All as per description of ser item No-91 above but 25mm.

All as per description of ser item No-91 above but 40mm.

All as per description of ser item No-91 above but 50mm.

M&L for construction of brick masonary valve pit of size 600 x 600 x 600 mm (Internal dimensions of chamber from top of PCC to bottom of cover) including excavation in any type of soil returning, filling around foundation and removal of surplus soil to a distance not exceeding 50m PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 10mm thick plaster in cement mortar 1:4 to internal surface covered pit with MS sheet cover 3.15 mm thick with locking arrangement handle fixing arrangement and painting with oil paint two coat over a coat of red oxide primer complete all as specified and directed.

M&L for lagging to pipes used in water supply or plumbing all round with, 40 mm thick bounded mineral wool preformed 'SNAPON' pipe section of density 144 Kg/cum conforming is IS 9842. on pipe of internal dia 20 mm with chicken mesh wire netting 25 mm gauge,20mm mesh complete all as specified and directed.

All as per description of ser item No-96 above but for 25mm dia pipe.

S&F non-return valve heavy duty of size 80 mm bore, ISI Marked, flanged ends including suitable nut bolts, washers, packing sheet, etc complete with necessary arrangements for fixing complete all as specified and directed.

S&F non-return valve heavy duty of size 50 mm bore, ISI Marked, flanged ends including suitable nut bolts, washers, packing sheet, etc complete with necessary arrangements for fixing complete all as specified and directed.

Dewatering of sump by pump from clean water sump of size and capacity(30000 to 50000Gln), and taking out sludge, removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing ,including brooming down complete including white washing internally, complete all as directed.

M&L for disconnecting and taking out unserviceable 3 phase electric motor of 5 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed..

M&L for disconnecting and taking out unserviceable 3 phase electric motor of15- 20 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed.

M&L for disconnecting and taking out unserviceable 3 phase electric motor of 30 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed.

M&L for repair to Centrifugal pump set of capacity 15-20 HP by replacing worn out impellers - 01 set, with bronze impellers, bearings - 02 Nos, bearing housing, gland bush, gland cups, unserviceable nuts, bolts, washers, etc complete all as specified and directed.

M&L for repair to Centrifugal pump set of capacity 30 HP by replacing worn out impellers - 01 set, with bronze impellers, bearings - 02 Nos, bearing housing, gland bush, gland cups, unserviceable nuts, bolts, washers, etc complete all as specified and directed.

S&F (after testing at site) fully automatic star delta starter for 10 HP motor /submersible pump provide with protection degree IP 54, Extended wide band coil, Starter type Air Break, FRLS internal Wiring Over load relay Range 8.0A to 12 A. complete all as specified and directed.

S&F manually operated direct On-line oil immersed starter (Heavy duty) ISI Marked suitable for 15-20 HP motor 3 phase 415 Volt AC 50 Hz complete all as specified and directed.

S&F (after testing at site) fully automatic star delta starter for 15 HP motor /submersible pump provide with protection degree IP 54, Extended wide band coil, Starter type Air break, FRLS internal Wiring complete all as specified and directed.

S&F in replacement of manually operated Direct On-line oil immersed starter (Heavy duty) ISI Marked suitable for 30 HP motor 3 phase 415 Volt AC 50 Hz complete all as specified and directed complete all as specified and directed.

Supply and fixing in replacement foot valve of size 80mm complete all as specified and directed.

Supply and fixing in replacement foot valve of size 50 mm complete all as specified and directed.

S & F cast iron sluice valve 80 mm bore, ISI marked flanged ends drilled pressure rating PN-1.0 PD short body confirming to IS- 14846-2000 having stainless steel spindle with cast iron operation wheel at top, complete all as specified and as directed. Note :- Flanged joints with jointing material shall deemed to be included in the quoted rate.

S & F cast iron sluice valve 50 mm bore, ISI marked flanged ends drilled pressure rating PN-1.0 PD short body confirming to IS- 14846-2000 having stainless steel spindle with cast iron operation wheel at top, complete all as specified and as directed. Note :- Flanged joints with jointing material shall deemed to be included in the quoted rate .

Material and labour for taking out the submersible pump motor assembly of capacity 20 HP from the borewell by taking out column pipe of any dia and length complete using skilled labour, T&P and transporting the same to workshop for repair and getting back and lowering the pump set in the borewell and providing electric connections complete all as specified and directed.

M&L for rewinding of 20 HP submersible motor by taking out burnt winding from stator with PVC insulated copper winding of same gauge and size as per existing, replacing bushes and testing and commissioning complete all as specified and directed.

M&L for dismantling of submersible pump assembly of capacity 20 HP and carry out repair including replacement of defective impellers, bushes, keys, CI bodies, unserviceable nuts, bolts and washers including testing and commissioning complete all as specified and directed.

M&L for Alum Ferric best quality or as approved by Engineer - in- Charge.

M&L for Calcium Hypochlorite or Bleaching Powder with minimum 30% chlorine content complete all as specified and directed.

S&F 10 Sqmm 3 core submersible cable of copper conductor flat type, complete all as specified and directed.

POPULARHARDWARESTORE

AAKASH CONTRACTORS

patriotic builders

M/S S. D. BUILDERS

M/S AAA CONSTRUCTIONS

Bidder Name

M/S S. D. BUILDERS

patriotic builders

POPULARHARDWARESTORE

M/S AAA CONSTRUCTIONS

Kesar Impex

AAKASH CONTRACTORS