Installation of nameplates on main roads Ward 15 CC drain and CC road from Kempe Nagannas house to Tahsildar Oni Ward 20 Development of CC road from Nagarajjappas house to Shamshuddins house JC Layout 1st Main 4th Cross Ward 21 and installation of hand rails on Rajakaluve Decorative lamp posts on 1st Main 2nd Main 3rd Main Ward 22 Deck slab on 5th Main 1st Cross JC Layout Ward 27 and CC road development on 5th Main from 1st Cross to 2nd Cross.

Installation of nameplates on main roads Ward 15 CC drain and CC road from Kempe Nagannas house to Tahsildar Oni Ward 20 Development of CC road from Nagarajjappas house to Shamshuddins house JC Layout 1st Main 4th Cross Ward 21 and installation of hand rails on Rajakaluve Decorative lamp posts on 1st Main 2nd Main 3rd Main Ward 22 Deck slab on 5th Main 1st Cross JC Layout Ward 27 and CC road development on 5th Main from 1st Cross to 2nd Cross.

Providing and Fixing Stainless steel name Board displaying information such as Name of Street,Ward no etc having Rectangular size 30"*24" and 24"*12" with Arrow Mrak symbol, writing of names of street...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Earth work in surface excavation by manual means for lowering & levelling the ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per draw...

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...

Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rol...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supply and Erection of Decorative pathway street light pole of Dimension : 150 mm dia, 2500mm (Height) integral type outdoor luminaire IP55 protected, suitable for 100W LED, fixture using Nichia, Osra...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm (Vol-06, SR 2023-24, p.no 15, I.no 35.01)

Fabricating supplying and mounting MS box made out SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. .(Vol-06, SR 2023-24, p.no 0...

Brass Cable Gland 25 mm 11 kv materials.(Vol-06, SR 2023-24, p.no 28, I.no 63.01)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 amps .(Vol-06, SR 2023-24, p.no 14, I.no 5.7.2)

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.(Vol-06, SR 2023-24 p.no21, I.no 5.48)

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.50A (Vo...

Supplying, fixing and wiring Electronic Trivect or Meter(ETV) 5 to 32/63A three phase 4 wire whole current class-1 Accuracy Energy Meter (Vol-06, SR 2023-24 P.no.19 I.no 5.35)

Pipe Grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt,nut,GI Strip sand washer complete Minimum Weight of GI Pipe: 7.3 Kg (Vol-06, SR 2023-24 P.no.73 I.no 51.01)

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (Vol-06, SR 2023-24 P.no.73 I.no 51.02)

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag (Vol-06, SR 2023-24 P.no.73 I.no 51.03)

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded metal ...