Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l_1₹47.1 LAccepted-AOC MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | l_1 | Accepted-AOC being lowest bidder | |
| 2 | L-2₹49.2 L+₹1.4 L (2.97%)Rejected-Finance | L-2 | Rejected-Finance Not being lowest bidder | |
| 3 | L-3₹49.8 L+₹2.0 L (4.23%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance Not being lowest bidder | |
| 4 | L-4₹50.1 L+₹2.3 L (4.85%)Rejected-Finance | L-4 | Rejected-Finance Not being lowest bidder | |
| 5 | L-5₹51.4 L+₹3.6 L (7.54%)Rejected-Finance | L-5 | Rejected-Finance Not being lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE (N) Bathinda
COMPREHENSIVE AIRFIELD MAINTENANCE IN AOR OF AGE B/R-III UNDER GE(N) BATHINDA AT BATHINDA MIL STN
2024_MES_660029_1
8939/NIT-31/24-25
Open Tender
Civil Works
Item Rate
270 days
BATHINDA
Class D category a(i)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹98,000
Yes
17 Sept 2024
15 Jun 2024
10 Jul 2024
15 Jun 2024
8 Jul 2024
1 Jul 2024
15 Jun 2024 - 22 Jun 2024
Amount
Taking out sealing compound from partially filled joints of size 10mm wide upto complete depth of filled material (approx 30mm deep) from of rigid concrete pavements/slab (thickness of slab150mm), cleaning of joints with brushes and fanning with compressor air to remove all loose dirt/dust etc. and priming and refilling the joints with new sealing compound grade 'A' complete all as specified and directed by Engineer-in-Charge.
Material and labour for complete removal of existing thermoplastic paint (any layers of existing treatment ) from runway, helirunway tarmac area by scraping with steel patti, wire brush and high pressure compressor jet complete all as specified and as directed by Engineer-in-Charge.
Material & labour for marking on runway/helirunway/road /pavements, like lines, dashes, arrows, letters or figures etc. using Hot applied retro-reflective thermoplastic road marking paint (in any colour as directed like white, golden, yellow, orange black etc.) confirming to MORT & H (clause 803.4) with 8% glass beads, using special applicator machine with heating arrangement upto 160 °C including cleaning and drying the existing road surface to ensure dust, oil grease and moisture free surface before applying the paint complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.
Material and labour for brick work with sub class ‘B’ old size bricks (old serviceable bricks obtained from demolition/dismantled item shall be reused ) straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:4 and pointed in cement mortar 1 : 3 complete all as specified and as directed by Engineer-in-charge
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge
Material and labour for brick work with sub-class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 and pointed in cement mortar 1 : 3 complete all as specified and as directed by Engineer-in-charge
Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. (each layer) bedded and pointed in any mortar all as specified.
Material and Labour old size Brick,sub class B laid flat in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 as in drains complete all as specified and as directed by Engineer-in- charge.
Material and Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundation, filling and mass concrete.complete all as specified and as directed by Engineer-in-charge
Material and Labour for P C C 1 : 2 : 4 type B-1 using 20 mm graded stone aggregate in bed plates , bends , coping, benching etc moulded or chamfered edges complete all as specified and as directed by Engineer-in-charge.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and Labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in sub base of flooring levelling course all as specified and directed by Engr-in-charge.
Material and Labour for pavement quality concrete (PQC) RMC ( RMC manufacturer to be approved by GE) with minimum flexural strength of 45 Kg per sqcm with minimum cement contents of 400 Kg/cum in field or as per design mix which ever is higher ( thickness 25cm or less) mixed with and including non circular synthetic fibre @ 0.25% by weight of cement as in floor including necessary form work (steel plates) for sides of slab complete all as specified and directed.
Material and labour for 75mm thick cement concrete ( 1:2:4), type B-1 (using 20 mm graded stone aggregate) as in floor, hardstanding/paving/path etc., and surface finished even & smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-charge.
Welding work in repairs in running welding thickness of metal to be welded n exc 6mm all as complete all as specified and as directed by Engineer-in-charge
Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces (internal surface), finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only)
Material and labour for rendering/plastering 10mm thick in cement mortar (1:3) on any face of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down or steel wire brushing and after preparing the surfaces applying two coats of oil bound distemper over a coat of alkaline resistant primer preparatory to distempering, as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars/cornices with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint over a coat of alkali resistant primer as approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings any height and any position complete all as specified & directed by Engineer-in- charge.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick, any colour having tensile strength of 550 Mpa as in ridge (including cutting and bent to shape), roof covering, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 3mm thick fibre glass reinforced transulcent corrugated /Plain sheeting with two corrugation on side lap fixed with coach screw and washer in roof wall etc complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.
Taking down shutters only of any description area exceeding 2.0 sqm and not exceeding 4.0 sqm each complete all as specified and as directed by Engineer-in- charge.
Supply & fixing powder coated aluminium frame, made out of aluminium section, for doors, windows, ventilators, partition with one or more rebate and for sliding window shutter including jointing cleat for fixing etc. including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge. Note :- Weight of each section shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.
Supply & fixing powder coated anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 03 Nos in each door (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing glass or particle board complete all as specified and directed by Engineer-in-Charge. Note :- Aluminium chowkhat frame, glass and particle board shall be measured and paid separately under appropriate item of BOQ.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified.
Supply & fixing powder coated anodised aluminium window shutter sliding type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 1 No and provision of interlocking system (size of handle as directed), anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium channel frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.
Supply only 4.0 mm thick sheet glass ordinary quality in squares / retangular exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge. Note :- Labour for fixing of glass shall be included in the main item of shutters.
Supply and fixing in opening PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube manufactured as per SSR part-I specifications and drawing, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing SS Butt hinges 100 mm, medium duty complete all as specified and as directed by Engineer-in-charge
Supply and fixing 150 mm Aluminium handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge
Supply and fixing 100 mm Aluminium anodised,barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge
Supply & fixing aluminium anodised sliding door bolts 150mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint of approved tint/colour to achieve glossing finish complete as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surface applying Two coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.
Material and labour for two coats of weather proof exterior emulsion paint incl preparation, washing rubbing down and stopping of painted surfaces over old surfaces of walls complete all as specified and as directed.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth and after that applying average 3mm thick layer (1.5mm thick each in two layer application) of white cement based putty after applying putty first and second coat sanding the surface as per requirement by using mechanical sander machine to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after prepare the surface smooth applying two coats of oil bound distemper (washable) as per approved tint/colour by using paint brush or roller brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls / pillars / cornices by scraping down with using steel patti wire/ brush / sand papering or by any other mean, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc brooming all dust including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying three coats of lime white wash with using paint brush, complete all as specified and as directed by Engineer-in-Charge
Material and labour for two coats of white wash incl preparation, washing rubbing down and stopping of painted surfaces over old surfaces of ceiling complete all as specified and as directed.
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
Material and labour for steel wire fabric mesh not exceeding 4 Kg/ sqm in weight, Welded to steel or fixing to wood members including welding and fixing material complete all as specified and directed by Engineer-in-Charge.
Taking down carefully existing mild steel sliding gate/door (Hangar gate) of size exceeding 30sqm but not exceeding 40sqm each panel, height of gate 8.5m (appx), repair to sliding channel (rail), wheel and all other small steel article by welding and replacement at site in any position including oiling / greasing, alignment / adjustments as easing to slide etc and after complete repair upto entire satisfaction of Engineer-in-charge gate shall be refixed in original position complete all as specified and as directed by Engineer-in-charge.
Material and labour for repair of existing Rolling shutter of size exceeding 20sqm but not exceeding 35 sqm each shutter , height of shutter 6.5 m (appx), repair to Shutter ,ball bearing, as specified including top cover, anchoring rod, hasp and staple and all gear operated system,flanks other small article of rolling shutter by welding and replacement at site in any position including oiling / greasing, alignment / adjustments as easing to slide etc and after complete including takind down and repair upto entire satisfaction of Engineer-in-charge rolling shutter shall be refixed in original position complete all as specified and as directed by Engineer-in-charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and Supply & fixing new 4mm thick sheet glass ordinary quality in squares / retangular (including cutting of glass as per site requirement) exceeding 0.5sqm in each pane and fixed in any type of doors/windows with fixing material as required complete all as specified & directed by Engineer-in- charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and Supply & fixing new 3mm thick sheet glass ordinary quality in squares / retangular (including cutting of glass as per site requirement) not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with wooden bead/pin tacked/with oil putty etc. as required or as directed including cutting of glass as per site requirement complete all as specified & directed by Engineer-in- charge.
Demolition of floor hearth or wall tiling including cement mortar bedding but not backing including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge
Material and labour for vitrified ceramic coloured tiles (light shade) 08mm to 10 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for vitrified ceramic coloured tiles (light shade) 08mm to 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm with integral foot rests, fixing in existing trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap made leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed shall be measured and paid separately under appropriate item of this schedule.
Supply & fixing in repair vitreous china wash down water closet pan EWC type white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule.
Supply and fixing in repair 10 litres capacity PVC valveless syphonic action type low level flushing cistern (white colour) with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe, PVC Connection 450 mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including bracket and cutting for and pinning in end of bracket or erecting including fixing only pillar tap/mixer valve (new or serviceable old pillar tap/mixer valve as per site condition ) complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing in replacement vitreous china urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar, complete all as specified & directed by Engineer-in-charge.
Supply & fixing in replacement pillar tap cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS.
Supply & fixing in replacement pillar tap swan neck type, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS
Supply and fixing in replacement bib tap cast copper alloy, chromium plated fancy type, long body with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply and fixing in replacement angle cock cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock/angle valve shall be as given in SSR or in relevant IS.
Supply and fixing in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr In Charge
Supply and fixing in repair waste pipe 32mm of any size and any type for sink/ WHB complete all as specified and directed by Engr In Charge
Supply & fixing in replacement Mixer valve 15mm bore, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for WHB/Wall/Sink , screwed down for iron pipe 15mm bore complete all as specified and as directed by Engineer-in-charge.
Supply and fixing hand shower (health faucet) SS body including 1 meter long 8mm dia flexible tube and including wall hook i complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair stainless steel chromimum plated jet suitable for EWC complete all as specified and direected by Engineer-in-charge.
Supply and fixing stainless steel grating square or circular fitting of size 100/125 mm with hole etc complete all as specified and as directed.
S&F in repairs Plastic water closet seat, any colour closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed by Engr In Charge
Dismantling water tanks and removing from site work, capacity exc 250 and n exc 500ltr.complete all as specified and as directed by Engineer-in-charge
Supply & fixing rotational moulded polyethylene water storage tank any colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and including ball valve and gate valve, complete all as specified and as directed by Engineer-in-charge.
Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exc. 500 litre but not exc. 1000 litre complete all as specified and as directed by Engineer-in-charge.
Supply & fixing rotational moulded polyethylene water storage tank any colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge.
Supply & fixing gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipecomplete all as specified and as directed by Engineer-in-charge
Dismantling Wall and ceiling boards, ACP boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.
Supply and fixing GI powder coated frame work 605mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600mmx600mmx6-7mm thick board in false ceiling with aluminium profile sheet on top side and PVC profile sheet on bottom side fixed in grid as per manufacturer specification and dirercted by Engineer-in-charge.
Supply and fixing hollow PVC lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, PVC sheet fleet complete all as specified and as directed by Engineer-in-charge.
Dismantling/Taking down of Interlock tiles of any description,laid dry or laid dry and pointed in floors aprons kerbs etc complete all as specified and as directed
Supply only fine sand without silt from (approved sources) for filling under interlocking tiles and the interstices etc complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory casted (made by using PVC paver mould / Rubber paver moulds on Vibrating Table Machine) using grey cement and no pigment, shape haxagon / trigular / zigzag / I-shaped etc, as directed, prepolished & preglazed, specification as per relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over sand upto required thick layer and filling the interstices etc complete all as specified and as directed by the Engineer-in-Charge. Note : - (i) Sand for filling shall be measured & paid separately as Supply only but labour for spreding leveling shall be included in the unit rate of this item)
Material and labour cement concrete 1:3:6 type C-1, (using 20mm graded stone aggregate) as in copings, packing around interlocking paver blocks complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.( Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A.
Material and labour for RCC 1:2:4 Type B0 (12.5mm graded stone aggregates) as in RCC Drain and sewage Main hole cover, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like. and form work for main hole included in item. (Reinforcement will be measured and paid for separately)
Supply and fixing aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer-in-charge.
Material and labour for mild steel work tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to latest relevant IS:1161-1979 grade St-240 complete all as specified & directed by Engineer-in- charge.
Material and labour for mild steel framed work, framed/truss work made by using hollow square/rectangular/round pipe (ERW or induction butt welded tubes conforming to latest relevant IS), or other section like angle, tee, plate, distance pieces, cleats etc. and cut to shape, drilled and counter sunk for screw, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, conforming to Gde Fe-410-W (Gde E-250 quality A) complete all as specified and as directed by the Engineer-in-Charge. Note ;- Sketch of truss design and steel section to be used shall be approved by Engineer-in-charge in writing before execution)
Dismantling/Taking down of bird proofing net in hanger approx height 12 to 15 mtr etc complete all as specified and as directed by Engineer- in- charge.
Material and labour for Anti bird net HDPE twine garware technical fibre limited. 1mm thickness hole size 20mm by 20mm colour black UV stablize dia of border rope 4mm UV stabilized border rope jointed with the net by machine interlocking process using three twiines of the same as that of net tied to 12 mm dia hooks made to shape or welded to steel structure and 12mm dia anchor fastner bolt fixed to PEB structure as aplicable of suitable material. Bird net be fixed on GI wire dia 5mm @ 3x3 mtr grid.complete all as specified and as directed by Engineer- in- charge. Note : Bird net be fixed in hangar approx height 12 to 15 mtr all necessary scaffolding and safety material included in this item.
Supply & fixing Aluminium composite panel of thickness 4mm adjusting to the aluminium frame complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair mortice lock aluminium vertical type, size 100mm 4 levers, complete all as specified and directed by Engineer-in-Charge.
R K GOYAL & COMPANY
N.G BUILDERS
M J BUILDERS
MODERN ENTERPRISES
K L JINDAL AND CO.
G N CONSTRUCTIONS
SAPNA BUILDERS
M/s HANS BROTHERS
M/s Kamal Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .