REPAIR TO ALUMINIUM JOINERY CUPBOARD PARTITIONS ETC IN OTHER THAN HOSPITAL BLDGS REPAIRS TO MISCELLANEOUS BR NATURE WORK FOR TEMPORARY BUILDING AND REPAIR TO POLYCARBONATE SHEET GI SHEET ROLLING SHUTTER COLLAPSIBLE GATE, MANGALORE PATTERN TILES,

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing debris out side MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

M&L for PCC 1:2:4 type B2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified.

M&L for RCC 1:2:4 type B1 (using 20 mm ground stone aggregate) in slabs supported on walls, beams and columns in floors, roofs ,landings ,balconies canopies ,deck slabs and in shelves and the like complete all as specified.

M&L for form work to sides & sofits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc 200mm thick ( horizontal or sloping) for rough finished surfaces of concrete flat.

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in hard standing/ finished even and smooth without using extra cement and making impression of expanded metal whilst the concrete is green.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primesed completed all as specifed and directed Note: The place of disposal shall be find out by the contractor.

Dismantling plain or corrugated steel/polycarbonate sheeting, any gauge, thickness, including nanital or similar pattern in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M&L for Brick work work with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified.

M&L for machine cut, machine polished granite stone slab 20mm thick in flooring set, bedded and jointed with white cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified .

Material & Labour for 20 mm thick maching cut Granite slab (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like laid over and including 15 mm thick screed bed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Material & Labour for 20 mm thick maching cut granite slab as in vertical surfaces i.e skirting, dasdo, jambs , risers and pillars etc , laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of stone complete all as specified.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 15mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified.

Material & Labour for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor laid in floor over and including 20mm thick screed bed or bedding layer in cement mortar ( (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

M&L for rendering 15 mm thick on fair faces of brickwork or concrete surfaces of wall in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement and finished even & smooth without using extra cement including necessary scaffolding and safety arrengement complete all as specified. Note- Water proofing compound will be measured and paid for separately.

M&L for rendering 15 mm thick on fair faces of brickwork or concrete surfaces of wall in CM (1:6) mixed with integral water proofing compound @ 3% by weight of cement and finished even & smooth without using extra cement including necessary scaffolding and safety arrengement complete all as specified. Note- Water proofing compound will be measured and paid for separately.

Dismantling of Mangalore pattern roof tiles in roofing all as directed

Dismantling of battens for tiles, shingles etc of any size including tilting fillets,spaced exc 15cm all as directed.

Dismantling of wooden boarding any description, fixed in any position with nails.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6

M&L for 2nd class hard wood (Sal) clean sawn battens at 30 cm centres, sectional area exc 5 Sqcm & n.exc 15 Sqcm complete all as specified.

M & L for 20 mm thick 2nd class Hardwood (Sal) boarding, planed one side and edges tongued and grooved or rebated in roofs, ceilings, etc and fixed with nails complete all as specified.

-Ditto- as item No 31.00 above but fixing only. (Dismantling boarding vide item No 27.00 shall be reused)

M&L for removing of old APP treatment, cleaning top surface of wooden planks with wire brush to remove all durt , dust etc and applying a layer of blown grade bitumen of any penetration applied hot @1.7 kg per sqm and laying APP based polymeric membrane 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) by forced application complete all as per manufacturers instructions and directed by Engr-in-charge.

Supply only polymer Dr. Fixit pidicrete URP or equivalent in M/s STP, Fosroc as approved

S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

S&F pre-painted hot- dip aluminium-zinc alloy metallic coated plain steel sheet, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

M & L for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for siding doors; fixed with angle cleats or other connceting plates conforming to Gde Fe 410-W (Gde E-250 quality A) complete all as specified

M&L for TMT CRS bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II.complete all as specified and as directed by Engr-in-Charge.

M&L for factory made solid PVC moulded door shutter 28 to 30 mm thick with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified in SSR Part-II.

M&L for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0 complete all as specified.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 100mm size butt hinges, heavy weight,cold rolled mild steel, and fixed complete all as specified.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size, ISI marked.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, 300 mm long , ISI marked.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm length, ISI marked.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated,designation No 3,universal type, ISI marked suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg

M&L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21

M&L for preparing new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including necessary scaffolding and safety arrangement complete all as specified.

S&F aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto 1200mm length with adjusting level and fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm x 60mm long and expansion hold fasteners 12.5mm dia. 40mm long @ 20cm c/c including dismantling carefully old false ceiling with ceiling boards, electrical fittings, fan, fire sencers etc and making good disturbed surface as per existing complete all as specified and directed. Note- New ceiling board will be measured & paid separately

S&F 10mm thick designed non asbestos fibre cement building boards of size 600mm x 600mm fixed or laid/inserted in aluminium grid false ceiling complete all as specified.

S&F in repairs Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple,safty lock etc. and one shop coat of primer; erected in position as indicated, complete: push pull or manual type 1.00 mm thick laths with ball bearing

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap and matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device and making all connections complete all as specified.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe including 1.2mtr hose pipe with complete connection, ISI marked complete all as specified and directed

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 110mm PVC 'S' trap and provision of lime concrete bedding and making all connections complete all as specified.

S&F in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.

S&F in repairs wash hand basin vitreous china flat black type of size 630 mm x 450 mm white, CI brackets and 32 mm dia PVC waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified

S&F in repairs vitreous china urinal half stall type white including connection to flushing pipe and out going pipe complete all as specified and directed.

S&F in repairs sinks stainless steel 304 grade 1 mm thick kitchen or laboratory with plugs washers and wastes: incluidng bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union ot pipe upto 0.50 sqm each overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed

S&F in repairs 2nd class hard wood (Sal) in scantlings in timber framed work and fixed, wrought, as in railings of existing pattern etc.including taking down of damage one complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each

Taking down partition wall of any description other than brick work of any size complete all as secified and directed by Engr-in-charge.

S&F 52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick plain heat moulded 'C' channel of size 75mm x 50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C' channel. The first & last MS Tube should be erected such that it is inside a PVC 'C' channel, in between adjoining plastic panel, 5mm thick x 75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and directed by Engr-in-charge. Note: Colour and pattern of PVC ply shall be approved by Engr-in-charge.

M & L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as as specified Note: - (i) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

S&F Powder coated Anodised aluminium for door, window and ventilator shutters, sliding or fixed type without sash bar, aluminium section minimum weighing 0.55 kg/m including all accessories such as glazing clips, handles, tower bolts,screws, rollers rubber beadings, for fixing glass panes in frame . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 50 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.

Supply and fixing concealed body lock for sliding windows 75mm long for sliding window shutter made of aluminium,anodised body complete all as specified and directed by Engr-in-charge.

S&F bearing/roller with metal body having plastic roller including screwed to shutter of aluminium windows complete all as specified and directed.

S&F 4.80mm thick sheet glass ordinary quality and glazing with aluminium beading and rubber etc in square n exc 0.50 sqm in each pane complete all as specified.

-Ditto--- all as per item No 70.00 above but exc 0.5 sq.m in each pane including hacking out the old one complete all as specified and directed by Engr-in-charge.

S&F aluminium anodised barrel tower bolts of extruded section, 100 mm length, ISI marked.

S&F extruded aluminium alloy handles, fabricated type, anodised 100 mm size, ISI marked.

S&F floor door stopper of length with cover plate 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F 4.80mm thick sheet glass, ground or obscured or frosted on one side glazing all with aluminum beading, glazing pin etc, or with oil putty in suare n exc 0.5 Sqm in each pane complete all as specified and directed

S&F in repairs Aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples and beads complete all as specified & directed .

S&F in repair aluminium anodised DECO grill(anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) DG-104 fixed with necessery U/F/H channel, of approved disign/pattern, with approved standard section and fixed to existing window frame with CP brass/ stainless steel screws@ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge.

M & L for 12mm thick toughened glass door , double shutter including providing SS pivots, door closer, SS corner supports as required, SS handle 600mm long fixed on both shutter, SS studs 1200mm long, locking arrangement and necessary SS accessories like clamps as required at site complete all as directed.

Supply and fix 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar works including cutting to shape, drilling holes required complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass form metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones with all necessary fixing accessories complete . Note:- glass should be measured and paid seperately.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified.

S&F in repairs plain aluminium ceiling system consisting of 600mm x 600mm pre coated aluminium tiles of 0.70mm thickness of white colour laid over and including GI powder coated grid system consisting of 15mm wide T- section flanges in white colour having rotary stitching o the main runner, 1200mm & 600mm cross tee with a web height of 32mm, perimeter wall angles of size 19mm x 19mm secured to walls at 450mm c/c with cadmimum plated screws including necessary fitting and 4mm GI suspenders fixed to slab using anchor fastener in ceiling of length as required on site complete as per manufacturer instructions including taking down carefully existing false ceiling with electrical fittings/fire sencers after disconnecting. Note:- i) The rate includes for necessary cutting in false ceiling for fixing electrical fittings, fire sencers etc and making electrical connections as per existing complete.

S&F in repairs ceiling fitted pulley operated clothes drying system consisting of anodized aluminium pipes, each of outer dia 22mm and inner dia 19.8mm of size 9 feet .Pulley made up of Delrin with rope guide mounted on channel pair of length 24" Each with locking system to hide rope knot, channel to be mounted or fixed with self tapping screws (38mm x 8) provided in kit and rope will be polyester braided undyed of 4mm dia.

Taking down manually operated rolling shutters not exceeding 5.00 Sqm each and re-fixing to its original position after cleaning all parts, straightening sliding rails, changing damaged parts such as lathe strip, bottom rail, vertical rails, mild steel spring etc. as required, greasing , oiling, servicing for smooth functioning of all parts including new nut and bolts to refix the shutter and also including making good to any damaged to brick or concrete works complete all as directed. Note :- (i) Change of damaged parts will be measured and paid seperately.

-Ditto- all as per item No 85.00 above, but exceeding 5.00 Sqm but not exceeding 10.00 Sqm each

Supply only 75mm wide lath strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with two coats of aluminium paint (shads to match with the existing) over a shop coat of red oxide primer complete all as specified and directed

Supply only mild steel bottom rail lock plate with two handles 150mm wide and 3mm thick including necessary locking arrangement on both sides and painting to bottom rail with two coats of aluminium paint to match with existing over a shop coat of red oxide primer complete all as specified & directed.

Supply only mild steel spring made out of 100 to 150mm dia high tension steel wire having 65 to 80 helical for rolling shutter for smooth working condition complete all as specified & directed

S&F in repairs 1mm thick top cover galvanized iron sheet including one shop coat of red oxide and two coats of aluminium paint shade to match with the existing complete all as specified and directed.

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including mild steel screw bolts / anchor bolts (machine made) with hexagonal / square heads at one end, to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm & n exc 15cm long dia of shank 11 to 15 mm and locking arrangements etc., complete all as specified in SSR Part I and directed

M&L for rolled mild steel in framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete,drilled for fixing of steel sheeting or other covering. Doors/gates to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings( exclusive of steel sheating or other covering,running rails and guides) and hanging also fastening and fixing conforming to Fe 410-W ( Gde E-250 ) quality A complete all as specified.

S&F in repair Gear Box assembly complete (Gear, crank, gear box, handle, rod etc) upto area of 20 Sqm of rolling shutter complete all as specified and directed by Engr-in-charge.

M&L preparation of new or previously untreated steel surfaces of any description over 10cm width of girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screws and washer in roof, wall etc. complete all as specified and directed by Engr-in-charge.

S&F 10mm thick polycarbonate sheeting with two corrugations side lap fixed with coach screws and washer in roof, wall etc. complete all as specified and directed by Engr-in-charge.

Material & Labour for rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets etc including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

M&L for rolled mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt elded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed .

M&L for Running welding in repairs and thickness of metal to be welded is n exc 6mm complete all as specified and directed by Engr-in-charge. Note:- The rates include for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required.

Supply and fixing 4mm dia galvanised steel wire, 150mm x 100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.65 cum getting out in hard/dense soil, returning filling in, and ramming earth or broken rubble mixed with earth around in layers n.exc. 25 cm and removing surplus soil to a distance n.exc 50m and making good disturbed surfaces as per existing complete all as directed.

Removing excavated material exc 50m and not exc 250m and deposit where directed at a level n exc. 1.5m above the starting point complete all as specified.

Material & Labour for mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified.

Dismantling timber scantling 40 sq.cm and over in section,in any position, unframed work all as directed.

M & L for mild steel rolled sections as in framing for cladding, glazing, making frame of CGI sheet chajjas and the like fixed with angle cleats and connecting plates,etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for Second class hard-wood ( Sal) scantlings, timber fixed and wrought all as specified.

S & F 20mm thick 2nd class hardwood (Sal) weather boarding clean sawn, plain, as in barge, facia, eaves etc in existing pattern including necessary scaffolding complete all as specified and directed

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified.

M&L preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete

M&L preparation of new plastered surfaces of wall and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specifications.

M&L for preparation of new or previously untreated plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-charge.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified.

S&F in repairs high density polymer extruded mesh coloured 2.40mm thick mesh and 27mm average aperture for bird protection all as specified and directed

SAHU AND SAHU CO. (BID ID -3267099)

B P ENTERPRISES (BID ID -3261593)

SN CONSTRUCTION (BID ID -3260562)