PROVISION OF TREATED RAW WATER SUPPLY FROM MEENA RAW WATER PUMP HOUSE TO BLDG P37 P42 P43 P44 AND NEARBY AREAS

Amount

Note:The rate should be quoted considering following point:- (i) Work to be carried in High rise building, necessary scaffolding and safety precaution coonsidered before quoting rates. (ii) Entire building to be covered with green cloth on MS scafolding upto top floor and necessary precaution sign board to be placed around the building before commencement and completiom of work. (iii) Debries removed outside Mod Land.

S&F medium grade galvanised tube with all fitting and fixed complete to walls, ceiling or laid in floors 15 mm bore of pipe including ss clamping and MS scaffolding all connected items such as elbow,union,tee,ferrules of any size etc complete all as specified and directed.

S&F medium grade galvanised tube with all fitting and fixed complete to walls, ceiling or laid in floors 20 mm bore of pipe including ss clamping and MS scaffolding all connected items such as elbow,union,tee,ferrules of any size etc complete all as specified and directed.

S&F medium grade galvanised tube with all fitting and fixed complete to walls, ceiling or laid in floors 25 mm bore of pipe including ss clamping and MS scaffolding all connected items such as elbow,union,tee,ferrules of any size etc complete all as specified and directed.

S&F medium grade galvanised tube with all fitting and fixed complete to walls, ceiling or laid in floors 40 mm bore of pipe including ss clamping and MS scaffolding all connected items such as elbow,union,tee,ferrules of any size etc complete all as specified and directed.

S&F chromium plated stop valves/stop cock 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F angular stop cock with wall flange upto any floor height all as specified and directed.

M&L for Cutting chases,hole, pinning in.Stone concrete block or slab, brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring or water proofing membrane,etc. and making good, cutting not exc 10 cm girth with core cutter machine and fill with smart care material such as microconcrete and other equavelent materials all as specified & directed by eng-in-charge

Dismantling floor hearth or wall tiling upto any thickness including mossaic tiles including cement mortar bedding but not backing,rate includes removing dismantled materials such as serviceable/unservicesble tiles,etc. out side MOD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

M&L for Glazed ceramic tiles in vertical surfaces of size 450x350x8 mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match as per existing pattern of tiles in bathrooms complete all as specified and as directed by the Engineer-in-Charge

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc and removing taken down materials such as cement plaster,etc. out side MD accomodation land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L rendering 5 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement all as specified and directed, as in ceiling complete all as specified and as directed by the Engineer-in-Charge.

M & L for rendering, 15 mm thick cement plaster 1:4 on brick work/concrete surface finished even and smooth with out using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparation of new plastered/concrete surfaces of walls applying two coats of exterior acrylic emulsion (weather proof treatment) over one coat of primer, complete all as specified and as directed ( The tint and shade be as approved by the GE) The treatment shall be carried out by the authorised applicator firm and at any height including necessary scaffolding etc complete all as specified and as directed by the Engineer-in-Charge.

M&L preparation of new plastered or unplastered surfaces of ceiling including scrapping and applying two coats of oil bound distemper over layer of smooth wall care Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth wall care Putty finish as required punning 3mm thick over a coat of primer strictly as per manufacture instruction with smooth roller finish complete all as specified and directed.

S&F 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/loose soil for laying of cable /erection of pole/stay pit excavation/pipe line complete all as specified and directed by Engr in Charge.

Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engr in Charge.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Eng in Charge.

M&L for PCC 1:3:6 type C2 (using 20 mm graded crushed stone aggregate) for filling in hard standing/ plinth protection of semi under tank and support to main water supply line all as directed by Engineer-in-Charge.

M&L for construciton of brick masonary valve pit chamber of size 75 x 75 x 75 cm (finished internal dimensions ) and 15 mm thick on internal wall surface finished even and smooth external using extra cement and plaster in cement mortar 1:4 and painted flush externally as possible and 50 mm thick PCC 1:2:4 type B-1 for copping and fixing new angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil including demolation of damaged existing valve pit complete all as specified and directed by Engr-in-Charge.

Supply and fixing 50mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr in Charge.

Supply and fixing 80 mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr in Charge.

Supply and laying GI tubing 50 mm dia medium grade with all fitting such as tee, socket, bend, union etc in wall/trenches complete all as specified and directed by Engr in Charge.

Supply and laying GI tubing 80 mm dia medium grade with all fitting such as tee, socket, bend, union etc in wall/trenches complete all as specified and directed by Engr in Charge.

M&L for carrying out in situ alternation to the existing header of pipe line and making one branch connection suitable for 80/100 mm pipe including cutting, welding, flange inserts etcand provision for installing one NRVof size upto 80/1000 mm dia complete all as specified and directed by Engr in Charge.

S&F 80 mm Sluice Valve Class PN 1.6 complete incl all jointing materials such as nuts, bolts, washers, rubber gaskets etc all as specified and directed.

Supply and fix 80 mm Non Return Sluice Valve complete incl all jointing materials such as nuts, bolts, washers, rubber gaskets etc all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr in Charge.

Panther Facilities (BID ID -3460203)

ADITYA CONSTRUCTION (BID ID -3460582)